MPR Kontakt Icon
MPR Suche
MPR Close
Schließen
Zurück

your one-stop certification solution!

Prodotti rilevanti per la BIS

Di seguito troverete una panoramica dei prodotti che richiedono lo schema di certificazione BIS I, lo schema di marcatura ISI (audit richiesto), seguito da un elenco separato per i prodotti che richiedono lo schema di registrazione BIS II, il sistema di registrazione obbligatoria (CRS) (nessun audit richiesto). Troverai anche gli standard IS associati a cui devono essere eseguiti i test.

Questi elenchi di componenti rilevanti per la BIS saranno molto probabilmente estesi.

Per ulteriori informazioni sulla certificazione BIS, si prega di leggere il nostro opuscolo informativo gratuito sulla certificazione BIS.

1. Prodotti che richiedono la certificazione BIS (Schema I, Schema di marchio ISI)

Sr No.IS No.Product
Cement (any variety of cement manufactured or sold in India) such as
1.IS 12330Sulphate Resisting Portland Cement
2.IS 12600Low heat Portland Cement
3.IS 1489 (Part 1)Portland Pozzolana Cement-Part1 Fly-ash based
4.IS 1489 (Part 2)Portland Pozzolana Cement-Part 2 Calcined clay based
5.IS 269Ordinary Portland Cement
6.IS 3466Masonry Cement
7.IS 455Portland Slag Cement
8.IS 6452High Alumina Cement for Structural use
9.IS 6909Super sulphated cement
10.IS 8041Rapid hardening Portland cement
11.IS 8042White Portland Cement
12.IS 8043Hydrophobic Portland Cement
13.IS 8229Oil well Cement
14.IS 16415: 2015Composite Cement- Specification.
15.IS 16993: 2018Microfine Ordinary Portland Cement- Specification.
16.IS 15895: 2018High Alumina Refractory Cement.
Household Electrical Goods
17.IS 12640 (Part 1)Residual current operated circuit breakers for house hold and similar uses-Part 1 Circuit breakers without integral overcurrent protection (RCCBs)
18.IS 12640 (Part 2)Residual current operated circuit breakers for household and similar uses–Part 2 Circuit breakers with integral overcurrent protection(RCVOs)
19.IS 13010AC watt-hour meters, class 0.5, 1 & 2
20.IS 13779AC static watt-hour meters, class 1 & 2
21.IS 14697AC static transformer operated watt-hour and VAR-hour meters, class 0.2S & 0.5S
22.IS 15111 (Part 1 & 2)Self Ballasted Lamps for General Lighting Services – Part 1 : Safety Requirements & Part 2 : Performance Requirements
23.IS 302 (Part 2/Sec 3)Safety of household and similar electrical appliances – Electric iron
24.IS 302 (Part 2/Sec 201)Safety of household and similar electrical appliances– Electric immersion water-heaters
25.IS 302 (Part 2/Sec 202)Safety of household and similar electrical appliances –Electric stoves
26.IS 302 (Part 2/Sec 30)Safety of household and similar electrical appliances-Room heaters
27.IS 3854Switches for domestic and similar purposes
28.IS 418Tungsten filament general service electric lamps (upto100 W )
29.IS 694PVC insulated cables for working voltages up to and including 1100V
30.IS 8828 (Since revised as IS/IEC 60898)Electrical Accessories-Circuit breakers for overcurrent protection for household and similar installations
31.IS 9968 (Part 1)Elastomer insulated cables (Part.1): For working voltages up to and including1100 V
Batteries
32.IS 8144Multi-Purpose dry batteries
Food & Related Products
33.IS 15757Follow–up formula –complimentary foods
34.IS 11536Processed cereal based complementary foods
35.IS 1165Milk-powder
36.IS 1166Condensed milk, partly skimmed and skimmed condensed milk
37.IS 12176Sweetened ultra high temperature treated condensed milk
38.IS 13334 (Part 1)Skimmed milk-powder, standard grade
39.IS 13334 (Part 2)Skimmed milk-powder, extra grade
40.IS 13428Packaged Natural Mineral Water
41.IS 14433Infant milk substitutes
42.IS 17945: 2022Food for Special Medical Purpose intended for Infants
43.IS 14542Partly skimmed milk powder
44.IS 14543Packaged Drinking Water (Other than Packaged Natural Mineral Water)
45.IS 1656Milk- cereal Based Complementary foods
46.IS 14625Plastic Feeding Bottles
47.IS 5168Glass Feeding Bottles
Oil Pressure Stoves
48.IS 10109Oil pressure stove, offset burner type
49.IS 2787Multi-burner oil pressure stoves
50.IS 1342Oil pressure stoves
Automobile Accessories
51.IS 13098Automotive vehicles –Tubes for pneumatic tyres
52.IS 15627Automotive vehicles– Pneumatic tyres for two and three-wheeled motor vehicles
53.IS 15633Automotive vehicles-Pneumatic tyres for passenger car vehicles– Diagonal and radial ply
54.IS 15636Automotive vehicles- Pneumatic tyres for commercial vehicles-Diagonal and radial ply
Cylinder, Valves and Regulator
55.IS 14899Liquefied petroleum gas containers for automotive use
56.IS 15100Multifunction valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use
57.IS 3196 (Part 4)Welded low carbon steel cylinders exceeding 5 litre Water capacity for low pressure liquefiable gases Part 4 Cylinders for toxic and corrosive gases
58.IS 3196 (Part 1)Welded low carbon steel gas cylinder exceeding 5 litre water capacity for low pressure liquefiable gases Part1 Cylinders for liquefied petroleum gas (LPG)
59.IS 3196 (Part 2)Welded low carbon steel gas cylinder exceeding 5-litre water capacity for low pressure liquefiable gases Part 2 Cylinders for liquefiable gases other than LPG.
60.IS 3224Valve fittings for compressed gas cylinder excluding liquefied petroleum gas cylinders
61.IS 3745Yoke Type Valve Connection for Small Medical Gas Cylinders
62.IS 7142Welded low carbon steel cylinders for low pressure liquefiable gases not exceeding 5 litre water capacity
63.IS 7285 (Part 1)Refillable Seamless steel gas cylinders Part1 Normalized steel cylinders
64.IS 7285 (Part 2)Refillable Seamless steel gas cylinders Part 2 Quenched and tempered steel cylinders with tensile strength less than 1100 MPa (112 kgf/mm2)
65.IS 7302Valve fittings for gas cylinder valves for use with breathing apparatus
66.IS 7312Welded and seamless steel dissolved acetylene gas cylinders
67.IS 8737Valve fittings for use with liquefied petroleum gas cylinders of more than 5 litre water capacity Part 2 Valve fittings for newly manufactured LPG cylinders
68.IS 8776Valve Fittings for Use with Liquefied Petroleum Gas (LPG) Cylinders up to and Including 5-Litre Water Capacity
69.IS 9798Low pressure regulators for use with liquefied petroleum gas (LPG) mixtures
Medical Equipment
70.IS 3055 (Part 1)Clinical thermometers: Part1 Solid stem type
71.IS 3055 (Part 2)Clinical thermometers: Part 2 Enclosed scale type
72.IS 7620 (Part 1)Diagnostic Medical X-Ray Equipment
Steel and Iron Products
73.IS 1785 (Part 1) : 1983Plain Hard-drawn Steel Wire For Pre-stressed Concrete: Part 1 Cold Drawn Stress-relieved Wire
74.IS 1785 (Part 2) : 1983Plain hard-drawn steel wire for pre-stressed concrete Part 2: As drawn wire
75.IS 6003:2010Indented wire for Pre-stressed concrete
76.IS 6006:2014Uncoated stress relieved strand for Pre-stressed concrete.
77.IS 13620:1993Fusion bonded epoxy coated reinforcing bars
78.IS 14268:1995Uncoated Stress Relieved Low Relaxation Seven-ply Strand For Pre-stressed Concrete.
79.IS 277:2003Galvanized steel sheets ( plain and corrugated).
80.IS 2002:2009Steel plates for pressure vessels for intermediate and high temperature service including boilers.
81.IS 2041:2009Steel plates for pressure vessels used at moderate and low temperature
82.IS 2830:2012Carbon steel cast billet ingots ,billets, blooms and slabs for rerolling into steel for general structural purpose
83.IS 1786:2008High strength deformed steel bars and wires for concrete reinforcement
84.IS 648:2006Cold rolled non-oriented electrical steel sheets and strip-fully processed type (CRNO)
85.IS 3024:2015Grain oriented electrical steel sheet & strip (CRGO)
86.IS 15391:2003Oriented Electrical Steel Sheet and Strip- Semi-Processed Type- Specification.
87.IS 2062:2011Hot rolled medium and high tensile structural steel
88.IS 432 : Part 1:1982Mild Steel and Medium Tensile Steel Bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild steel and medium tensile steel bars
89.IS 432 : Part 2:1982Mild steel and Medium Tensile steel bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard- Drawn Steel Wire
90.IS 513 (Part-1): 2016Cold reduced carbon steel sheets and strips Part 1 Cold Forming and Drawing Purpose
91.IS 513(Part-2):2016Cold reduced carbon steel sheets and strips Part 2 High Tensile and Multi-phase Steel
92.IS 1079: 2017Hot Rolled Carbon Steel Sheet, Plate and Strip — Specification.
93.IS 1875:1992Carbon steel billets, blooms, slabs and bars for forgings.
94.IS 2879:1998Mild steel for metal arc welding electrodes.
95.IS 3502:2009Steel Chequered Plates
96.IS 5872:1990Cold Rolled Steel Strips (Box Strappings).
97.IS 5986: 2017Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging Purposes — Specification.
98.IS 6240:2008Hot Rolled Steel Plate (up to 6 mm) Sheet and Strip for the Manufacture of Low Pressure Liquefiable Gas Cylinders
99.IS 7283:1992Hot Rolled bars for production of bright bars and machined parts for engineering applications.
100.IS 7887:1992Mild steel wire rods for general engineering purposes.
101.IS 10748:2004Hot Rolled Steel Strip for Welded Tubes and Pipes.
102.IS 11513:2017Hot Rolled Carbon Steel Strip for Cold Rolling Purposes — Specification
103.IS 15647:2006Hot rolled steel narrow width strip for welded tubes and pipes
104.IS 7904:2017High carbon steel wire rods- Specification
105.IS 14246:2013Continuously pre-painted galvanized steel sheets and coils
106.IS 15965:2012Pre-painted aluminium zinc alloy metallic coated steel strip and sheet (Plain).
107.IS 280: 2006Mild steel wire for General Engineering purposes.
108.IS 1835:1976Round Steel wire for ropes
109.IS 3975:1999Low Carbon Galvanized steel wires formed wires and Tapes for armouring of Cables
110.IS 4368:1967Alloy Steel billets, blooms and slabs for forging for general engineering purposes.
111.IS 4454 (Part 1) : 2001Steel wire for mechanical springs Part-1 cold drawn unalloyed steel wire.
112.IS 4454 (Part 2): 2001Steel wire for mechanical springs Part-2 oil hardened and tempered steel wire.
113.IS 4824:2006Bead Wires for Tyres
114.IS 11169 (Part 1): 1984Steels for Cold Heading/Cold extrusion application Part-1 Wrought carbon and low alloy steels
115.IS 11587:1986Structural Weather resistant steel.
116.IS 15103: 2002Fire resistant Steel- Specification
117.IS 15914:2011High Tensile Strength Flat Rolled Steel Plate (Up to 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder.
118.IS 15961:2012Hot Dip aluminium- Zinc alloy metallic coated steel strip and sheet (Plain)
119.IS 15962:2012Structural Steel for Building for Structures with improved seismic Resistance
120.IS 6527:1995Stainless Steel wire Rod
121.IS 6528:1995Stainless Steel Wires
122.IS 6603:2001Stainless Steel Bars and Flats
123.IS 5522:2014Stainless Steel sheets and strips for utensils- Specification
124.IS 6911:2017Stainless Steel Plate, Sheet and Strip- Specification
125.IS 15997:2012Low Nickel Austenitic Stainless Steel Sheet and Strip For Utensils and Kitchen Applications- Specification
126.IS 1110 : 1990Ferrosilicon – Specification
127.IS 4409 : 1973Specification for Ferronickel
128.IS 1029 : 1970Specification for Hot rolled steel strip (bailing)
129.IS 2385 : 1977Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plate
130.IS 3039 : 1988Specification for Structural steel for construction of hulls of ships
131.IS 9550 2001Bright steel bars – v Specification
132.IS 3748 : 1990Tool and die steels – Specification
133.IS 5517 : 1993Steel for hardening and tempering – Specification
134.IS 7291 : 1981Specification for High speed tool steels
135.IS 7494 : 1981Specification for Steel for valves for internal combustion engines
136.IS 12146 : 1987Specification for Carbon manganese steel forgings for pressure vessels
137.IS 16585 : 2016Magnetic materials – specification for individual material – Fe based amorphous strip delivered in the semi-processed state.
138.IS 2831 : 2012Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (ordinary quality) – Specification
139.IS 1148: 2009Steel Rivet Bars (medium And High Tensile) – For Structural Purposes
140.IS 1673: 1984Specification for Mild Steel Wire, Cold Heading Quality
141.IS 1812: 1982Specification for Carbon Steel Wire for the Manufacture of Wood Screws
142.IS 2507: 1975Specification for Cold – rolled Steel Strips For Springs.
143.IS 2255: 1977Specification for Mild Steel Wire Rod for the Manufacture of Machine Screws (By Cold Heading Process).
144.IS 3195: 1992Steel For the Manufacture of Volute And Helical Springs (for Railway Rolling Stock) – Specification .
145.IS 3431: 1982Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension.
146.IS 3885-Part-1: 1992Steel for the manufacture of laminated springs (railway rolling stock) Part 1 Flat Sections – Specification.
147.IS 3885-Part- 2: 1992Steel for the manufacture of laminated springs (railway rolling stock) Part 2: Rib and Groove Sections- Specification.
148.IS 4223: 1975Specification for Steel Wire for Umbrella Ribs .
149.IS 4224: 1972Specification for Steel Wire for Staples, Pins And Clips.
150.IS 4397: 1999Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages/ Retainers- Specification.
151.IS 4398: 1994Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races- Specification
152.IS 6902: 1973Specification for Steel Wire for spokes.
153.IS 6967: 1973Specification for Steel For Electrically welded round Link Chains.
154.IS 7226: 1974Specification for Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes.
155.IS 7557: 1982Specification for Steel Wire: (Up to 20 mm) for the manufacture of cold-forged rivets.
156.IS 8052: 2006Steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications – Specification.
157.IS 8951: 2001Steel Cast Billet Ingots, Billets and Blooms for production of High Carbon Steel Wire Rods- Specification
158.IS 8952: 1995Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes – Specification
159.IS 9476: 1980Specification for Cold rolled steel strips for carbon steel razor blades.
160.IS 9962: 1981Specification for Steel Wire for Needles.
161.IS 12367:1988Specification for Cold-rolled Carbon Steel Strips/ Coils for Manufacture of Welded Tubes.
162.IS 14331:1995Steels for High Temperature Bolting Applications – Specification
163.IS 14491:1997Low carbon high strength cold rolled steel sheets and coils for cold forming- Specification
164.IS 14650:1999Carbon Steel Cast Billet Ingots, Billets, Blooms and Slabs for Rerolling purposes- Specification
165.IS 4882: 1979Specification for Low Carbon Steel Wire for Rivets for use in Bearing Industry
166.IS 2090:1983Specification for High Tensile Steel Bars used in Pre-stressed Concrete
167.IS 6529:1996Stainless Steel Blooms Billets And Slabs For Forging
168.IS 9294:1979Cold-Rolled Stainless Steel Strips for Razor Blades
169.IS 10631:1983Stainless Steel for welding electrode core wire
170.IS 10632 (Part 2):1983Specification for Non Magnetic stainless steel for electrical applications Part 2 Specific requirements for binding wire.
171.IS 10632 (Part 3):1983Specification for Non Magnetic stainless steel for electrical applications Part 3 Specific requirements for sheets, strips and plates.
172.IS 11169 (Part 2): 1989Steels for cold heading/cold extrusion applications – specification Part 2 Stainless steel
173.IS 5651:1987Steels for Pneumatic Tools
174.IS 9516:1980Heat Resisting Steels
175.IS 11952:1986Steels For Piston Pins (Gudgeon Pins)
176.IS 12045:1987Alloys Used in Electrical Resistance Metallic Heating Elements
177.IS 14652:199918 Percent Nickel Maraging Steel Bars and Rods
178.IS 1566:1982Specification for Hard-drawn Steel Wire Fabric For Concrete Reinforcement
179.IS 5489: 1975Carburizing Steels For Use in Bearing Industry.
180.IS 11946:1987Soft Magnetic Iron Strips
181.IS 11947:1987Soft Magnetic Iron Rods, Bars Flats and Sections
182.IS 963: 1958Chrome molybdenum steel bars and rods for aircraft purposes
183.IS 4454 (Part 4): 2001Steel Wires for Mechanical Springs- Part 4: Stainless Steel Wire
184.IS 1993 : 2018Cold-reduced Electrolytic Tin Plate
185.IS 12591:2018Cold-reduced Electrolytic Chromium/Chromium oxide – coated steel
186.IS 412:1975Expanded Metal Steel Sheets For General Purposes
187.IS 2100: 1970Steel Billets,Bars And Sections For Boilers
188.IS 2589: 1975Hard Drawn Steel Wire For Upholstery Springs
189.IS 3298: 1981Mild Steel Rivet Bars For Ship Building
190.IS 4072: 1975Steel For Spring Washers
191.IS 8510 (Part II): 1977Steel Wire For Banding Of Armatures And Rotors Part II Specific Requirements for magnetic banding wires
192.IS 8510 (PartIII): 1977Tinned Steel Wire For Banding Of Armatures And Rotors Part III Specific Requirements for non-magnetic banding wires
193.IS 8563: 1977Half Round Mild Steel Wire For The Manufacture of Split Pins
194.IS 8564: 1977Steel Wire For Nipples For Spokes
195.IS 8565: 1977Heald Wire
196.IS 8566: 1977Steel Wire For Reeds
197.IS 8917: 1978Plates For Galvanizing Pots
198.IS 9442: 1980Hot Rolled Steel Plates Sheets And Strips For Manufacture of Agricultural Discs
199.IS 9485: 1980Cold-Reduced And Hot-Rolled Carbon Steel Sheet For Porcelain Enamelling
200.IS 10794: 1984Mild steel wire for cotter pins
201.IS 12262:1988Trapezoidal Steel Wire For Springs Washers
202.IS 12313: 1988Hot-Dip Terne Coated Carbon Steel Sheets
203.IS 15911:2010Structural Steel (Ordinary Quality)
204.IS 4430: 1979Mould Steels
205.IS 4431: 1978Carbon And Carbon- Manganese Free- Cutting Steels
206.IS 4432: 1988Case Hardening Steels
207.IS 5518: 1996Steels For Die Blocks For Drop Forging
208.IS 8748: 1978Forged/Rolled CTC Segments
209.IS 12145: 1987Quenched And Tempered Alloy Steel Forgings For Pressure Vessels
210.IS 13387: 1992Tool Steel Forgings For Metal Forming
211.IS 14698:1999Carbon And Low Alloy Billets, Blooms, Slabs And Bars For Manufacture Of Shell BodiesAnd Proof Shots Used In Defence Services
212.IS/ISO 11951 : 2016Cold – Reduced tinmill products – Blackplate
213.IS 3930: 1994Flame And Induction Hardening Steels
214.IS 5478: 1969Thermostat Metal Sheet and Strip
215.IS 13352: 1992Stock for Forgings produced from Continuously Cast Blooms, Billets and Slabs
216.IS 16644: 2018Stress-Relieved, Low Relaxation Steel Wire for Pre-stressed Concrete
217.IS 17404 : 2020Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheetsand Strips
218.IS 8329 : 2000Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage
219.IS 9523:2000Ductile iron fittings for pressure pipes for water, gas and sewage
220.IS 1161:2014Steel tubes for structural purposes
221.IS 1239 (Part 1):2014Steel Tubes, Tubulars and Other Wrought Steel Fittings – Part 1: Steel Tubes
222.IS 4270:2001Steel tubes used for water-wells (upto 200 mm dia)
223.IS 9139:1979Specification for Malleable iron shots and grits for use in foundries
Electrical Transformers
224.IS 1180 (Part 1)Out door type Oil immersed Distribution Transformers upto and including 2500 kVA, 33 KV-specification Part 1 Mineral oil immersed
Electrical Motors
225.IS 12615Energy Efficient Induction Motors-Three Phase Squirrel Cage
Capacitors
226.IS 2993A.C. motor capacitors
227.IS 13340Power Capacitors of Self-healing Type for AC Power Systems having Rated Voltage up to 650V
228.IS 13585 Part 1Shunt Power Capacitors of the Non-Self-Healing Type for AC System having a Rated Voltage up to and Including 1000V Part-1 General Performance, Testing amd Rating Safety Requirements Guide for Installation and Operation
Chemicals, Fertilizers, Polymers & Textiles
229.IS 252:2013Caustic Soda -Specification
230.IS 10116 : 2015Boric Acid – Specification
231.IS 15573Poly Aluminium Chloride
232.IS 695Acetic Acid
233.IS 2833Aniline
234.IS 517Methanol
235.IS 5158: 1987Specification for Phthalic Anhydride, Technical
236.IS 8058:2018Pyridine
237.IS 16113:2013Gamma Picoline
238.IS 16112:2013Beta Picoline
239.IS 12084: 2018Morpholine
240.IS 297:2001Sodium Sulphide, Technical
241.IS 7129:1992Potassium Carbonate, Anhydrous
242.IS 170:2004Acetone
243.IS 4581:1978Phosphorous Trichloride, pure and Analytical Reagent
244.IS 11744:1986Phosphorous Pentachloride, Technical
245.IS 11657:1986Phosphorous Oxychloride, Technical
246.IS 2080:2021Stabilized Hydrogen Peroxide
247.IS 3205:1984Precipitated Barium Carbonate, Technical
248.IS 12928:1990Precipitated Barium for Ceramic and Glass Industry
249.IS 4505:2015Sodium Formaldehyde Sulphoxylate
250.IS 6100:1984Sodium Tripolyphosphate, Anhydrous, Technical
251.IS 14709:1999n- Butyl Acrylate
252.IS 336:1973Ether
253.IS 5295:1985Ethylene Glycol
254.IS 537:2011Toluene
255.IS 15030:2001Terephthalic Acid
256.IS 14707: 1999Methyl Acrylate
257.IS 14708:1999Ethyl Acrylate
258.IS 12345:1988Vinyl Acetate Monomer
259.IS 4105:2020Styrene (Vinyl Benzene)
260.IS 5149:2020Maleic Anhydride, Technical
261.IS 12540:1988Acrylonitrile
262.IS 17265:2019100 Percent. Polyester Spun Grey and White Yarn (PSY)
263.IS 17261:2019Polyester Continuous Filament Fully Drawn Yarn (FDY)
264.IS 17264:2019Polyester Industrial Yarn (IDY)
265.IS 17262:2019Polyester Partially Oriented Yarn (POY)
266.IS 17263:2019Polyester Staple Fibres (PSF)
267.IS 7328:2020Polyethylene Material for moulding and extrusion
(i) Low Density Polyethylene (LDPE)
(ii) Linear Low-Density Polyethylene (LLDPE)
(iii) High Density Polyethylene (HDPE)
268.IS 11356:2020Styrene-Butadiene Rubber Latex
269.IS 16481:2016Synthetic Micro-Fibres for use in Cement Based Matrix
270.IS 12795:2020Linear Alkyl Benzene
271.IS 13601:1993Ethylene Vinyl Acetate (EVA) Copolymers
272.IS 7686:20203(N, N-DiEthyl) Aminophenol
273.IS 4566:2020Methylene Chloride (Dichloromethane)
274.IS 2012:2006Red Phosphorus
275.IS 17077 :2019/ISO 19062-1 : 2015Acrylonitrile Butadiene Styrene (ABS)
276.IS 869:2020Ethylene Dichloride
277.IS 17370:2020p-Xylene
278.IS 14434:1998Polycarbonate
279.IS 17397 (Part 1) : 2020/ISO 16365-1 : 2014Polyurethanes
280.IS 17442:2020Vinyl Chloride Monomer
281.IS 17450 : 20201,3 Phenylenediamine
282.IS 10931 : 1984Lauric Acid
283.IS 12029 : 1986Acid Oil
284.IS 12067: 1987Palm Fatty Acids
285.IS 12068 :1987Rice Bran Fatty Acids
286.IS 12069 : 1987Coconut Fatty Acids
287.IS 12124 : 1987Rubberseed Fatty Acids
288.IS 12361 :1988Hydrogenated Rice Bran Fatty Acids
Kitchen Appliances
289.IS 302 (Part 2/ Section 14)Hand-held Blender
290.IS 4250Domestic Electric Food Mixer (Liquidizers and Grinders) and Centrifugal Juicer
Domestic Water Heaters for use with LPG
291.IS 15558Instantaneous Domestic Water Heater for use with Liquefied Petroleum Gas
Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls
292.IS 1391 (Part-1): 2017Room Air Conditioners- Specification Part 1 Unitary Air Conditioners
293.IS 1391 (Part-2): 2018Room Air Conditioners- Specification Part 2 Split Air Conditioners
294.IS 8148:2018Ducted and Package Air Conditioners
295.IS 11329:2018Finned type Heat Exchanger for Room Air Conditioner
296.IS 10617:2018Hermetic compressor
Hermetic Compressors-Specification
Plugs and Socket-Outlets and Alternating Current Direct Connected Static Prepayment Meters for Active Energy
297.IS 1293 : 2005Plugs and socket-outlets of Rated Voltage up to and including 250 Volts and Rated current up to and including 16 amperes
298.IS 15884:2010Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Class1 and 2)
Domestic Gas Stoves for use with Liquefied Petroleum Gases
299.IS 4246: 2002Domestic Gas Stoves for use with Liquefied Petroleum Gases
Transparent Float Glass
300.IS 14900: 2018Transparent Float Glass
Domestic Pressure Cooker
301.IS 2347:2017Domestic Pressure Cooker
Cables
302.IS 1554(Part 1) : 1988Specification for PVC Insulated (Heavy Duty) Electric Cables Part 1 For Working Voltages up to and Including 1100 V
303.IS 1554(Part 2) : 1988Specification for PVC Insulated (Heavy Duty) Electric Cables Part 2 For Working Voltages from 3.3 kV up to and Including 11 kV
304.IS 7098 (Part 1) : 1988Specification for Crosslinked Polyethylene Insulated PVC Sheathed Cables Part 1 for working voltages up to and including 1100 V
305.IS 7098 (Part 2) : 2011Crosslinked polyethylene insulated Thermoplastics sheathed cables – Specification Part 2 for working voltages from 3.3 kV up to and including 33 kV
306.IS 7098 (Part 3) : 1993Cross-Linked Polyethylene Insulated Thermoplastics Sheathed Cables Part 3 For Working Voltages from 66 kV Up to and Including 220 kV
307.IS 14255 : 1995Aerial Bunched Cables – For Working Voltages Up to and Including 1100 Volts – Specification
308.IS 9968 (Part 2) : 2002Specification for Elastomer Insulated Cables Part 2 For Working Voltages form 3.3 kV Up to and Including 33 kV
309.IS 8784 : 1987Specification for Thermocouple Compensating Cables
310.IS 9857 : 1990Welding Cables – Specification
311.IS 14494 : 2019Elastomer Insulated Flexible Cables for Use in Mines – Specification
312.IS 2593 : 1984Specification for Flexible Cables for Miner’s Cap-Lamps
313.IS 5950 : 1984Specification for Shot Firing Cables (for use other than in shafts)
314.IS 17048 : 2018Halogen Free Flame Retardant (HFFR) Cables for Working Voltages Up to and Including 1100 V – Specification
Rubber Hose for Liquefied Petroleum Gas (LPG)
315.IS 9573(Part 1):2017Rubber Hose for Liquefied Petroleum Gas (LPG)- Specification Part 1 Industrial Application
316.IS 9573(Part 2):2017Rubber Hose for Liquefied Petroleum Gas (LPG)- Specification Part 2- Domestic and Commercial Application.
Aluminium Foil
317.IS 15392Aluminium and Aluminium Alloy Bare Foil for Food Packaging
Non Electric Toys
318.IS 9873 (Part 1) : 2018Safety of Toys Part l Safety Aspects Related to Mechanical and Physical Properties.
IS 9873 (Part 2) : 2017Safety of Toys Part 2 Flammability.
IS 9873 (Part 3) : 2017Safety Requirements for Toys Part 3 Migration of Certain Elements.
IS 9873 (Part 4) : 2017Safety of Toys Part 4 Swings, Slides and Similar Activity Toys for Indoor and Outdoor Family Domestic Use.
IS 9873 (Part 7) : 2017Safety of Toys Part 7 Requirements and Test Methods for Finger Paints.
IS 9873 (Part 9) : 2017Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children’s Products.
Electric Toys
319.IS 15644: 2006Safety of Electric Toys.
Flat Transparent Sheet Glass
320.IS 2835 : 1987Flat Transparent Sheet Glass.
Safety Glass
321.IS 2553 (Part 1):2018Safety Glass -Specification Part 1 Architectural, Building and General uses.
322.IS 2553 (Part 2):2019Safety Glass -Specification Part 2 For Road Transport .
Woven Sacks
323.IS 14887:2014Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging of 50 kilogram Foodgrains
324.IS 16208:2015Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging 10 kilogram, 15 kilogram, 20 kilogram, 25 kilogram, and 30 kilogram Foodgrains
325.IS 14968:2015Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging 50 kilogram /25 kilogram Sugar
326.IS 14252:2015Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for filling Sand
Butterfly Valves
327.IS 13095:1991Butterfly valves for general purpose
Reflectors for Bicycles
328.IS/ISO 6742 (Part 2):2015Retro-reflective Devices
Paper
329.IS 14490:2018Plain Copier Paper
Cattle Feeds
330.IS 2052 : 2009Compounded Feeds for Cattle
Automobile Wheel Rim Component
331.IS: 16192 (Part 1)Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 1
Light Alloy Wheel Rims Method of Tests and Requirements
332.IS: 16192 (Part 2)Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 2
Sheet Metal Wheel Rims Method of Tests and Requirements
333.IS: 16192 (Part 3)Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 3
Spoke Wheel Rims Method of Tests and Requirements
334.IS: 9436Performance Requirements and Methods of Tests for Wheels for Passenger Cars
335.IS: 9438Performance Requirements and Methods of Tests for Wheels or Rims for Trucks and Buses
Foot Wear
336.IS 5557: 2004Industrial and protective rubber knee and ankle boots
337.IS 5557 (Part 2): 2018All rubber gum boots and ankle boots
338.IS 5676: 1995Moulded solid rubber soles and heels
339.IS 6664: 1992Rubber microcellular sheets for soles and heels
340.IS 6719: 1972Solid PVC soles and heels
341.IS 6721: 1972PVC sandal
342.IS 10702: 1992Rubber Hawai Chappal
343.IS 11544: 1986Slipper, rubber
344.IS 12254: 1993Polyvinyl chloride(PVC) industrial boots
345.IS 13893: 1994Polyurethane sole, semirigid
346.IS 13995: 1995Unlined moulded rubber boots
347.IS 16645: 2018Moulded plastics footwear- Lined or Unlined polyurethane boots for general industrial use
348.IS 16994: 2018Footwear for men and women for municipal scavenging work
349.IS 1989 (Part 1): 1986Leather safety boots and shoes for miners
350.IS 1989 (Part.2): 1986Leather safety boots and shoes for heavy metal industries
351.IS 3735: 1996Canvas Shoes Rubber Sole
352.IS 3736: 1995Canvas Boots Rubber Sole
353.IS 3976: 2018Safety Rubber Canvas Boots for Miners
354.IS 11226: 1993Leather safety footwear having direct moulded rubber sole
355.IS 14544: 1998Leather safety footwear with direct moulded polyvinyl chloride (PVC) sole
356.IS 15844: 2010Sports footwear
357.IS 17012: 2018High ankle tactical boots with PU – Rubber sole
358.IS 17037: 2018Antiriot shoes
359.IS 17043: 2018Derby shoes
360.IS 15298 (Part 2): 2016Personal protective equipment – Part 2 Safety Footwear
361.IS 15298 ( Part 3) : 2019Personal protective equipment – Part 3 Protective Footwear
362.IS 15298 (Part 4) : 2017Personal protective equipment – Part 4 Occupational Footwear
Press Tool-Punches
363.IS 4296 (Part 1):2016Tools for Pressing Part 1 Round Punches with 60 Degrees Conical Head and Straight Shank
364.IS 4296 (Part 2):2016Tools for Pressing Part 2 Punches with Cylindrical Head and Straight or Reduced Shank
365.IS 4296 (Part 3):2016Tools for Pressing Part 3 Round Punches with 60 Degrees Conical Head and Reduced Shank
Helmet for Riders of Two Wheeler Motor Vehicles
366.IS 4151: 2015Helmet for Riders of Two Wheeler Motor Vehicles
Refrigerating Appliances
367.IS 17550 (Part 1): 2021Household Refrigerating Appliances- Characteristics and Test Methods part-1 General Requirements
368.IS 7872: 2018Freezers
Centrifugally cast (Spun) iron pipes
369.IS 1536: 2001Centrifugally cast (Spun) iron pressure pipes for water, gas and sewage
370.IS 3989: 2009Centrifugally cast (Spun) iron spigot and socket soil, waste, ventilating and rainwater pipes, fittings and accessories
371.IS 15905: 2011Hubless centrifugally cast (Spun) iron pipes, fittings and accessories – Spigot series
Flux Cored (Tubular) Electrodes
372.IS 15769:2008Flux Cored (Tubular) Electrodes for Gas Shielded and Self-Shielded Metal Welding of Carbon or Carbon- Manganese Steel
Sewing Machine
373.IS 15449 : Part 1 : 2004Household Zig-Zag Sewing Machine Head
Water Treatment System
374.IS 16240 : 2015Reverse Osmosis (RO) Based Point-Of-Use (POU) Water Treatment System
Jute Bag
375.IS 1943:1995A- twill Jute Bag
376.IS 2566:1993B-twill Jute bags for packing foodgrains
377.IS 12650:2018Jute bags for packing 50 Kg foodgrains
378.IS 15138:2010Jute bags for packing 50 Kg sugar
379.IS 16186:2014Light weight jute sacking bags for packing 50 Kg foodgrains
380.IS 16372:2015Jute bags for packing up to 30 Kg foodgrains
381.IS 17266:2019Viscose Staple Fibres

2. Prodotti soggetti alla registrazione BIS [schema II, sistema di registrazione obbligatoria (CRS)]

I. List of Electronics and IT Goods under ‘Compulsory Registration Scheme’ for Self Declaration of conformity-Notified by Ministry Of Electronics And Information Technology
Sl. No.IS No.TitleProduct Category
1.IS 616Audio, Video and Similar Electronic Apparatus – Safety RequirementsElectronic Games (Video)
2.IS 13252 (Part 1)Information Technology Equipment – Safety – General RequirementsLaptop/Notebook/Tablets
3.IS 616Audio, Video and Similar Electronic Apparatus – Safety RequirementsPlasma/ LCD/LED Televisions of screen size 32″ & above
4.IS 616Audio, Video and Similar Electronic Apparatus – Safety RequirementsOptical Disc Players with built in amplifiers of input power 200W and above
5.IS 302-2-25Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovensMicrowave Ovens
6.IS 13252 (Part 1)Information Technology Equipment – Safety – General RequirementsVisual Display Units, Video Monitors of screen size 32″ & above
7.IS 13252 (Part 1)Information Technology Equipment – Safety – General RequirementsPrinters, Plotters
8.IS 13252 (Part 1)Information Technology Equipment – Safety – General RequirementsScanners
9.IS 13252 (Part 1)Information Technology Equipment – Safety – General RequirementsWireless Keyboards
10.IS 13252 (Part 1)Information Technology Equipment – Safety – General RequirementsTelephone Answering Machines
11.IS 616Audio, Video and Similar Electronic Apparatus – Safety RequirementsAmplifiers with input power 2000W and above
12.IS 616Audio, Video and Similar Electronic Apparatus – Safety RequirementsElectronic Musical Systems with input power 200W and above
13.IS 302-2:26Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 26 ClocksElectronic Clocks with Mains Powers
14.IS 13252 (Part 1)Information Technology Equipment – Safety – General RequirementsSet Top Box
15.IS 13252 (Part 1)Information Technology Equipment – Safety – General RequirementsAutomatic Data Processing Machine
16.IS 13252 (Part 1)Information Technology Equipment- Safety General RequirementsPower Adaptors for IT Equipments
17.IS 616Audio, Video and Similar Electronic Apparatus-Safety RequirementsPower Adaptors for Audio, Video & Similar Electronic Apparatus
18.IS 16242 (Part 1)General and Safety Requirements for UPSUPS/Invertors of rating≤5kVA
19.IS 15885 (Part 2/Sec 13)Safety of Lamp Control gear Part 2 Particular Requirements Section 13 d.c. or a.c. Supplied Electronic Control gear for LED ModulesDC or AC Supplied Electronic Control gear for LED Modules
20.IS 16046Secondary Cells and Batteries containing Alkaline or other non-acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applicationsSealed Secondary Cells/Batteries containing Alkaline or other non-acid Electrolytes for use in portable applications
21.IS 16102(Part 1)Self-Ballasted LED Lamps for General Lighting Services Part 1 Safety RequirementsSelf-Ballasted LED Lamps for General Lighting Services
22.10322 (Part 5/Sec 1)Luminaries Part 5 Particular Requirements Sec 1 Fixed General purpose luminariesFixed General Purpose LED Luminaries
23.IS 13252 (Part 1)Information Technology Equipment-Safety-General RequirementsMobile Phones
24.IS 13252 (Part 1)Information Technology Equipment-Safety-General RequirementsCash Registers
25.IS 13252 (Part 1)Information Technology Equipment-Safety-General RequirementsPoint of Sale Terminals
26.IS 13252 (Part 1)Information Technology Equipment-Safety-General RequirementsCopying Machines/Duplicators
27.IS 13252 (Part 1)Information Technology Equipment-Safety-General RequirementsSmart Card Readers
28.IS 13252 (Part 1)Information Technology Equipment-Safety-General RequirementsMail Processing Machines/Postage Machines/Franking Machines
29.IS 13252 (Part 1)Information Technology Equipment-Safety-General RequirementsPassport Reader
30.IS 13252 (Part 1)Information Technology Equipment-Safety-General RequirementsPower Banks for use in portable applications
31.IS 16333 (Part-3)Mobile Phone Handsets Part 3 Indian Language Support for Mobile Phone Handsets – Specific RequirementsMobile Phones
32.IS 10322 (Part 5/Section 2): 2012Luminaires Part 5: Particular Requirements Section 2 Recessed LuminairesRecessed LED Luminaries
33.IS 10322 (Part 5/Section 3): 2012Luminaires – Part 5: Particular Requirements Section 3 Luminaires for Road and Street LightingLED Luminaires for Road and Street lighting
34.IS 10322 (Part 5/Section 5): 2013Luminaires – Part 5: Particular Requirements Section 5 Flood LightsLED Flood Lights
35.IS 10322 (Part 5/Section 6): 2013Luminaires – Part 5: Particular Requirements Section 6 Hamp LampsLED Hand lamps
36.IS 10322 (Part 5/Section 7): 2013Luminaires – Part 5: Particular Requirements Section 7 Lighting ChainsLED Lighting Chains
37.IS 10322 (Part 5/Section 8): 2013Luminaires – Part 5: Particular Requirements Section 8 Luminaires for Emergency LightingLED Luminaires for Emergency Lighting
38.IS 16242 (Part 1):2014General and Safety Requirements for UPSUPS/Inverters of rating ≤ 10kVA
39.IS 616:2010Audio, Video and Similar Electronic Apparatus – Safety RequirementsPlasma/ LCD/LED Television of screen size up-to 32”
40.IS 13252 (Part 1):2010Information Technology Equipment –Safety General RequirementsVisual Display Units, Video Monitors of screen size up-to 32”
41.IS 13252 (Part 1):2010Information Technology Equipment –Safety General RequirementsCCTV Cameras/CCTV Recorders
42.IS 302 (Part 1): 2008Safety of Household and similar electrical appliances Part 1 General requirementsAdapters for household and similar electrical appliances
43.IS 13252 (Part 1):2010Information Technology Equipment –Safety General RequirementsUSB driven Barcode readers, barcode scanners, Iris scanners, Optical fingerprint scanners
44.IS 13252 (Part 1):2010Information Technology Equipment –Safety General RequirementsSmart watches
45.IS 16103 (Part 1): 2012LED modules for general lighting: Part 1 safety requirementsStandalone LED Modules for General Lighting
46.IS 10322 (Part 5)Section 9: 2017Luminaries: Part 5 Particular Requirements Section 9 Rope LightsLighting Chain (Rope Lights)
47.IS 13252 (Part 1) :2010Information technology equipment – safety part 1 general requirementsKeyboard
48.IS 302 (Part 2): Section 6: 2009Safety of household and similar electrical appliances: part 2 particular requirements, section 6 cooking ranges, hobs, ovens and similar appliancesInduction Stove
49.IS 13252 (Part 1) :2010Information technology equipment – safety part 1 general requirementsAutomatic Teller Cash dispensing machines
50.IS 13252 (Part 1) :2010Information technology equipment – safety part 1 general requirementsUSB Type External Hard Disk Drive
51.IS 616: 2017Audio, video and similar electronic apparatus-safety requirementsWireless Headphone and Earphone
52.IS 13252 (Part 1) :2010Information technology equipment – safety part 1 general requirementsUSB Type External Solid- State Storage Devices (above 256 GB capacity)
53.IS 616: 2017Audio, video and similar electronic apparatus-safety requirementsElectronic Musical System with input power below 200 Watts
54.IS 13252 (Part 1) :2010Information technology equipment – safety part 1 general requirementsStandalone Switch Mode Power Supplies (SMPS)with output voltage 48 V (max)
55.IS 616: 2017Audio, video and similar electronic apparatus-safety requirementsTelevision other than Plasma/ LCD/LED TVs
56.IS 302 (Part 2): Section 15: 2009safety of household and similar electrical appliances: part 2 particular requirements: section 15 appliances for heating liquidsRice Cooker
57.IS 616:2017Audio, video and similar electronic apparatus-safety requirementsWireless microphone
58.IS 13252 (Part 1): 2010Information technology equipment – safety part 1 general requirementsDigital Camera
59.IS 616:2017Audio, video and similar electronic apparatus-safety requirementsVideo Camera
60.IS 616:2017Audio, video and similar electronic apparatus-safety requirementsWebcam (Finished Product)
61.IS 616:2017Audio, video and similar electronic apparatus-safety requirementsSmart Speakers (with and without Display)
62.IS 60669-2-1: 2008Particular requirements for Electronic switches standards for Switches for household and similar fixed electrical installations.Dimmers for LED products
63.IS 616:2017Audio, video and similar electronic apparatus-safety requirements.Bluetooth speakers
II. List of Solar Photovoltaics, Systems, Devices and Components under Compulsory Registration Scheme- Notified by Ministry Of New and Renewable Energy
Sl. No.IS No.TitleProduct Category
1.IS 14286
IS/IEC 61730 -1
IS/IEC 61730 -2
Crystalline Silicon Terrestrial Photovoltaic (PV) modules – Design Qualification And Type ApprovalCrystalline Silicon Terrestrial Photovoltaic (PV) modules (Si wafer based)
2.IS 16077
IS/IEC 61730 -1
IS/IEC 61730 -2
Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type ApprovalThin-Film Terrestrial Photovoltaic (PV) Modules (a-Si, CiGs and CdTe)
3.IS 16221 (Part 2)Safety of Power Converters for Use in Photovoltaic Power Systems Part 2-Particular Requirements for InvertersPower converters for use in photovoltaic power system
4.IS 16169Test Procedure of Islanding Prevention Measures for Utility-Interconnected Photovoltaic InvertersUtility –Interconnected Photovoltaic inverters
5.IS 16270Secondary Cells and Batteries for Solar Photovoltaic Application General-Requirements and Methods of TestStorage battery
III. Low – Voltage switchgear and control gear-Notified by Ministry Of Heavy Industries And Public Enterprises
Sl. No.IS No.TitleProduct Category
1.IS/IEC 60947 :Part 2 : 2016Low – Voltage switchgear and controlgear: Part 2 circuit – Breakers (First Revision)Low – Voltage switchgear and controlgear: Circuit – Breakers
2.IS/IEC 60947 :Part 3 : 2012Low – Voltage switchgear and controlgear: Part 3 switches, disconnectors, switch disconnectors and fuse – Combination unitsLow – Voltage switchgear and controlgear: switches,disconnectors, switch disconnectors and fuse – Combination units
3.IS/IEC 60947 :Part 4 : Sec 1 : 2012Low – Voltage switchgear and controlgear: Part 4 contactors and motor – Starters: Sec 1 electromechanical contactors and motor – Starters(FirstRevision)Low – Voltage switchgear and controlgear: electromechanical contactors and motor – Starters
4.IS/IEC 60947 :Part 4 : Sec 2 : 2014Low – Voltage switchgear and controlgear: Part 4 contactors and motor – Starters: Sec 2 a.c semiconductor motor controllers and starters First Revision)Low – Voltage switchgear and controlgear: a.c semiconductor motor controllers and starters
5.IS/IEC 60947 :Part 4 : Sec 3 : 2014Low – Voltage switchgear and controlgear: Part 4 contactors and motor – Starters: Sec 3 a.c. semiconductor motor controllers and contactors for non – Motor loads (Second Revision)Low – Voltage switchgear and controlgear: a.c.semiconductor motor controllers and contactors for non – Motor loads
6.IS/IEC 60947 : Part 5 : Sec 1 : 2009Low – Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision)Low – Voltage switchgear and controlgear: electromechanical control circuit devices
7.IS/IEC 60947 : Part 5 : Sec 2 : 2007Low – Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 2 proximity switchesLow – Voltage switchgear and controlgear proximity switches
8.IS/IEC 60947 : Part 5 : Sec 5 : 2016Low – Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 5 electrical emergency stop devices with mechanical latching functionLow – Voltage switchgear and controlgear: electrical emergency stop devices with mechanical latching function
IV. List of chemicals notified by Ministry of Chemicals and Fertilizers.
Sl. No.IS No.TitleProduct Category
1.IS 798:2020Ortho Phosphoric Acid – SpecificationOrtho Phosphoric Acid
2.IS 17439:2020Polyphosphoric Acid – SpecificationPolyphosphoric Acid
3.IS 17412:2020Trimethyl Phosphite – Technical GradeTrimethyl Phosphite
V. List of Textile material notified by Ministry of Textiles
Sl. No.IS No.TitleProduct Category
1.IS 12171:2019Cotton Bales- SpecificationCotton Bales

Contact us!

MPR India Certification – consulenzaesperta e realizzazione di progetti di certificazione in tutto il mondo.

Scarica gratuiamente il libretto di certificazione BIS!

Contacto
T +49-69-2713769261