Standards
Here is a list of the current standards for CDSCO mandatory products.
The CDSCO is not an entity that can publish standards. The CDSCO relies on the BIS to formulate and publish standards. The BIS publishes a large number of standards every year, and the CDSCO decides in each individual case whether to use these standards or not. For now, the CDSCO has not announced any clear guidelines on how it applies these standards.
For more information regarding the CDSCO certification, please read our free information booklet “CDSCO Registration – The Booklet“.
The BIS so far has published or planned the following Standards:
| S.No | Committee Number | Committee Name | Published Standards |
| 1 | MHD 1 | Surgical Instruments | 115 |
| 2 | MHD 2 | Orthopaedic Instruments, Implants And Accessories | 130 |
| 3 | MHD 3 | Obstetric And Gynaecological Instruments And Appliances | 64 |
| 4 | MHD 4 | Ear, Nose And Throat Surgery Instruments | 81 |
| 5 | MHD 5 | Ophthalmic Instruments And Appliances | 91 |
| 6 | MHD 6 | Thoracic And Cardiovascular Surgery Instruments | 48 |
| 7 | MHD 7 | Neurosurgery Instruments Implants And Accessories | 44 |
| 8 | MHD 8 | Dentistry | 174 |
| 9 | MHD 9 | Artificial Limbs, Rehabilitation Appliances and Equipment for the Disabled | 115 |
| 10 | MHD 10 | Medical Laboratory Instruments | 32 |
| 11 | MHD 11 | Anaesthetic, Resuscitation And Allied Equipment | 57 |
| 12 | MHD 12 | Hospital Equipment and Surgical Disposal | 126 |
| 13 | MHD 13 | Veterinary Hospital Planning And Surgical Instruments | 17 |
| 14 | MHD 14 | Hospital Planning | 31 |
| 15 | MHD 15 | Eletromedical Dignostic Imaging and Radiotherapy equipment | 84 |
| 16 | MHD 17 | Health Informatics | 77 |
| 17 | MHD 19 | Immuno-biological Diagnostic Kits | 33 |
| 18 | MHD 20 | Medical Biotechnology And Nanotechnology | 0 |
| 19 | MHD 21 | Hospital Bio Medical Waste Management And Infection Control | 0 |
| 20 | MHD 23 | Anatomy and Forensic Sciences Equipment | 0 |
| Total | 1319 | ||
The individual sub lists can be found here. For above mentioned reason this list is only to be taken as a consideration, but not to be taken as basis for a decision.
| MHD 1 | 1 | IS 10383 : 1982 | Scissors, Nail, Curved on Flat | Product Specification | 2016, Dec |
| MHD 1 | 2 | IS 10384 : 1982 | Scissors, Bandage, Smith’s Pattern | Product Specification | 2016, Dec |
| MHD 1 | 3 | IS 10414 : 1982 | Scissors, Bowel | Product Specification | 2016, Dec |
| MHD 1 | 4 | IS 10445 : 1982 | Scissors, bandage and clothing, angle to side | Product Specification | 2016, Dec |
| MHD 1 | 5 | IS 10599 : 1993 | Surgical Instruments – Needle Holders, Hegar’s Pattern – Sizes, Shape and Dimensions | Product Specification | 2016, Dec |
| MHD 1 | 6 | IS 10637 : 1992 | Surgical instruments – Forceps, spinter, Arthur’s pattern Shape and dimensions | Product Specification | 2016, Jan |
| MHD 1 | 7 | IS 10638 : 1983 | Forceps, Sponge Holding, Foerster’s Pattern, Smooth or Serrated Jaws | Product Specification | 2016, Dec |
| MHD 1 | 8 | IS 10984 : 1984 | Scissors, Dissecting, Curved on Flat, Pott’s Pattern | Product Specification | 2016, Dec |
| MHD 1 | 9 | IS 11497 : 2014 | Catheter, Foley’s Rubber, for Prolonged Urinary Drainage – Specification | Product Specification | 2019, Jan |
| MHD 1 | 10 | IS 11502 : 1992 | Surgical instruments – Forceps, tissue,Adson-Brown’s pattern – Shape and dimensions | Product Specification | 2018, Mar |
| MHD 1 | 11 | IS 11545 : 1992 | Surgical instruments – Haemostatic, forceps, Adson’s pattern – Shape and dimensions | Product Specification | 2018, Mar |
| MHD 1 | 12 | IS 11558 : 1992 | Surgical instruments – vessel, forceps,Debakey’s pattern – Sizes, shape and dimensions | Product Specification | 2018, Mar |
| MHD 1 | 13 | IS 11595 : 1992 | Surgical instruments – Peritoneum, forceps, McKulicz’s pattern – Shape and dimensions | Product Specification | 2018, Mar |
| MHD 1 | 14 | IS 11640 : Part 1 : 1986 | Retractor, General Surgery – Part 1 : Schonborn’s Pattern | Product Specification | 2016, Dec |
| MHD 1 | 15 | IS 11640 : Part 2 : 1987 | Retractor, General Surgery – Part 2 : Kocher’s Pattern | Product Specification | 2018, Mar |
| MHD 1 | 16 | IS 11640 : Part 3 : 1987 | Retractor – Part 3 : Israel’s Pattern | Product Specification | 2018, Mar |
| MHD 1 | 17 | IS 11640 : Part 4 : 1987 | Retractor – Part 4 : Abdominal, Fritsch’s Pattern | Product Specification | 2018, Mar |
| MHD 1 | 18 | IS 11640 : Part 5 : 1987 | Retractor – Part 5 Korte’s Pattern | Product Specification | 2018, Mar |
| MHD 1 | 19 | IS 11640 : Part 6 : 1987 | Retractor, General Surgery – Part 6 : Volkmann’s Pattern | Product Specification | 2018, Mar |
| MHD 1 | 20 | IS 11640 : Part 7 : 1987 | Retractor – Part 7 : Abdominal and Liver, Mikulicz’s Pattern | Product Specification | 2018, Mar |
| MHD 1 | 21 | IS 12103 : 1987 | Skin Graft Expander | Product Specification | 2018, Mar |
| MHD 1 | 22 | IS 12815 : 1989 | Surgical Instruments – Knife Autopsy | Product Specification | 2016, Jan |
| MHD 1 | 23 | IS 12822 : 1989 | Surgical Instruments – Forceps Intestinal Mayo-Robson’s Pattern | Product Specification | 2016, Jan |
| MHD 1 | 24 | IS 12841 : Part 1 : 1989 | Surgical Instruments – Needle Holders – Part 1 : Mathieu’s Pattern | Product Specification | 2016, Feb |
| MHD 1 | 25 | IS 12841 : Part 2 : 1989 | Surgical Instruments – Needle Holders – Part 2 : With Carbide Inserts, Stratte’s Pattern | Product Specification | 2016, Mar |
| MHD 1 | 26 | IS 12841 : Part 3 : 1989 | Surgical Instruments – Needle Holders – Part 3 : Heaney’s Pattern | Product Specification | 2016, Mar |
| MHD 1 | 27 | IS 12841 : Part 4 : 1989 | Surgical Instruments – Needle Holders – Part 4 : with Carbide Inserts, Debakey’s Pattern | Product Specification | 2016, Mar |
| MHD 1 | 28 | IS 13127 : 1991 | Surgical Instruments – Suture Clip Applying Forceps, Wachenfeld Type – Shape, Dimensions and Mass | Product Specification | 2016, Dec |
| MHD 1 | 29 | IS 13198 : 1991 | Surgical Instruments – Trocar Holding Forceps, Vogel Type – Shape, Dimensions and Mass | Product Specification | 2016, Dec |
| MHD 1 | 30 | IS 15732 : Part 1 : 2018 | Endoscopes – Medical Endoscopes and Endotherapy Devices Part 1 General Requirements ( First Revision) | Product Specification | 0 |
| MHD 1 | 31 | IS 15732 : Part 2 : 2019 | Endoscopes — Medical Endoscopes and Endotherapy Devices Part 2 Particular Requirements for Rigid Bronchoscopes | Product Specification | 0 |
| MHD 1 | 32 | IS 15732 : Part 3 : 2006 | Optics and photonics Medical Endoscopes and endotherapy devices : Part 3 Determination of field of view and direction of view of endoscopes with optics | Methods of tests | 2016, Nov |
| MHD 1 | 33 | IS 15732 : Part 4 : 2006 | Optics and photonics Medical Endoscopes and endotherapy devices : Part 3 Determination of maximum width of insertion portion | Methods of tests | 2016, Nov |
| MHD 1 | 34 | IS 15732 : Part 7 : 2019 | Endoscopes — Medical Endoscopes and Endotherapy Devices Part 7 Basic Requirements for Medical Endoscopes of Water-Resistant Type | Product Specification | 0 |
| MHD 1 | 35 | IS 3318 : 1965 | General requirements for surgical scalpels and knives | Product Specification | 2016, Dec |
| MHD 1 | 36 | IS 3319 : 1995 | Blades, Surgical, Detachable (Bard Parker Type) and Handles | Product Specification | 2016, Jan |
| MHD 1 | 37 | IS 3320 : 1973 | Surgical Scalpels | Product Specification | 2016, Dec |
| MHD 1 | 38 | IS 3642 : Part 1 : 1990 | Surgical instruments – Part 1: Non-cutting articulated instruments | Product Specification | 2016, Dec |
| MHD 1 | 39 | IS 3643 : 1992 | Surgical instruments – Dissecting forceps (serrated and toothed) – Shapes and dimensions | Product Specification | 2018, Mar |
| MHD 1 | 40 | IS 3644 : 1992 | Surgical instruments – Artery forceps Halsted’s Mosquito pattern – Shape and dimensions | Product Specification | 2018, Mar |
| MHD 1 | 41 | IS 3645 : 1992 | Surgical instruments – Artery forceps Spencer Wells pattern – Size, shape and dimensions | Product Specification | 2018, Mar |
| MHD 1 | 42 | IS 3759 : 1987 | Blades, Skin Grafting | Product Specification | 2016, Dec |
| MHD 1 | 43 | IS 3767 : 1966 | Hook, Skin, Gillies Pattern | Product Specification | 2016, Dec |
| MHD 1 | 44 | IS 3787 : 1966 | Gag, Mouth, Cleft Palate | Product Specification | 2016, Dec |
| MHD 1 | 45 | IS 4085 : 1967 | Knives, Amputating | Product Specification | 2016, Dec |
| MHD 1 | 46 | IS 4094 : 1967 | Forceps, Sterilizer, Cheatle’s Pattern | Product Specification | 2016, Dec |
| MHD 1 | 47 | IS 4244 : 1967 | Retractors, Skin, Double Ended | Product Specification | 2016, Dec |
| MHD 1 | 48 | IS 4245 : 1967 | Needle Holder (Gillies) Combined with Scissors, for Plastic Surgery | Product Specification | 2017 |
| MHD 1 | 49 | IS 4275 : 1967 | Scissors, Kilner’s for Plastic Surgery | Product Specification | 2016, Dec |
| MHD 1 | 50 | IS 4281 : 1967 | Scissors, McIndoe’s, for Plastic Surgery | Product Specification | 2016, Dec |
| MHD 1 | 51 | IS 4282 : 1992 | Surgical instruments – Dissecting, forceps, plastic surgery – Shape and dimensions | Product Specification | 2018, Mar |
| MHD 1 | 52 | IS 4490 : 1968 | Forceps, Dilating, Trousseau’s | Product Specification | 2016, Dec |
| MHD 1 | 53 | IS 4513 : 1968 | Scissors, Surgical Dressing and Stitch | Product Specification | 2016, Dec |
| MHD 1 | 54 | IS 4587 : 1968 | Raspatories, Cleft Palate, for Plastic Surgery | Product Specification | 2016, Dec |
| MHD 1 | 55 | IS 5738 : 1970 | Cystoscope | Product Specification | 2016, Dec |
| MHD 1 | 56 | IS 5750 : 1970 | Sigmoidoscope | Product Specification | 2016, Dec |
| MHD 1 | 57 | IS 6434 : 1971 | Bow, Hare Lip Traction (Denis Browne’s pattern) | Product Specification | 2016, Dec |
| MHD 1 | 58 | IS 6435 : 1971 | Strippers, Tendon | Product Specification | 2016, Dec |
| MHD 1 | 59 | IS 6437 : 1970 | Stripper, Fascia | Product Specification | 2016, Dec |
| MHD 1 | 60 | IS 6989 : 1973 | Chisel, Post-mortem | Product Specification | 2018, Mar |
| MHD 1 | 61 | IS 6990 : 1973 | Knife, Brain, Post-mortem | Product Specification | 2018, Mar |
| MHD 1 | 62 | IS 6996 : 1973 | Knife, Cartilage | Product Specification | 2018, Mar |
| MHD 1 | 63 | IS 7388 : 1992 | Surgical instruments – Forceps,tissue,Allis pattern – Shape, size and dimensions | Product Specification | 2018, Mar |
| MHD 1 | 64 | IS 7501 : 1974 | Speculum, Rectal, Kelly’s Pattern | Product Specification | 2018, Mar |
| MHD 1 | 65 | IS 7502 : 1974 | Clamp, Intestine, Kocher’s Pattern | Product Specification | 2018, Mar |
| MHD 1 | 66 | IS 7507 : 1974 | Forceps, Stone, Bladder | Product Specification | 2018, Mar |
| MHD 1 | 67 | IS 7521 : 1974 | Dissector, Kocher’s Pattern | Product Specification | 2018, Mar |
| MHD 1 | 68 | IS 7522 : 1975 | Retractor, Abdominal, Morris’ Pattern | Product Specification | 2018, Mar |
| MHD 1 | 69 | IS 7531 : 1990 | Surgical Instruments – Corrosion Resistance of Stainless Steel Surgical Instruments – Methods of Tests | Methods of tests | 2018, Mar |
| MHD 1 | 70 | IS 7561 : 1992 | Surgical instruments – Forceps, Gallstone, Desjardin’s pattern – Shape and dimensions | Product Specification | 2018, Mar |
| MHD 1 | 71 | IS 7566 : 1992 | Surgical instruments – Forceps,spring clip compressing,Michel’s pattern – Shape and dimensions | Product Specification | 2018, Mar |
| MHD 1 | 72 | IS 7579 : 1992 | Surgical instruments – Forceps,intestine holding, Denis Browne’s pattern – Shape and dimensions | Product Specification | 2018, Mar |
| MHD 1 | 73 | IS 7628 : 1975 | Clamp, Stomach, Moynihan’s Pattern | Product Specification | 2018, Mar |
| MHD 1 | 74 | IS 7665 : 1975 | Clamp, Intestine, Crushing, Lever Action, Payr’s Pattern | Product Specification | 2018, Mar |
| MHD 1 | 75 | IS 7858 : 1991 | Surgical microscope | Product Specification | 2018, Mar |
| MHD 1 | 76 | IS 7870 : 1992 | Surgical instruments – Needle,holder,Mayo-Hegar’s and Crile-Wood’s Patterns – Shape and dimensions | Product Specification | 2018, Mar |
| MHD 1 | 77 | IS 7892 : 1975 | Retractor, Double and Single, Blunt Hooks | Product Specification | 2018, Mar |
| MHD 1 | 78 | IS 7893 : 1992 | Surgical instruments – Forceps, towel, Backhaus’s pattern – Shape. size and dimensions | Product Specification | 2018, Mar |
| MHD 1 | 79 | IS 7912 : 1975 | Scoop, Stanley Boyd’s Pattern | Product Specification | 2018, Mar |
| MHD 1 | 80 | IS 7980 : 1976 | Handle of skin Grafting Blade | Product Specification | 2018, Mar |
| MHD 1 | 81 | IS 7994 : 1976 | Needle Holder, Barron’s Pattern | Product Specification | 2018, Mar |
| MHD 1 | 82 | IS 8031 : 1976 | Dissector, Watson Cheyne’s Pattern | Product Specification | 2018, Mar |
| MHD 1 | 83 | IS 8040 : 1992 | Surgical instruments – Artery, forceps,Kocher’s pattern – Shape and dimensions | Product Specification | 2018, Mar |
| MHD 1 | 84 | IS 8253 : 1976 | Lever, Bone, Bristow’s Pattern | Product Specification | 2018, Mar |
| MHD 1 | 85 | IS 8340 : 1977 | Needle, Aneurism, Syme’s Pattern | Product Specification | 2018, Mar |
| MHD 1 | 86 | IS 8341 : 1977 | Retractor, Goitre, Joll’s Pattern | Product Specification | 2018, Mar |
| MHD 1 | 87 | IS 8372 : 1977 | Retractor, Alae, Kilner’s Pattern | Product Specification | 2018, Mar |
| MHD 1 | 88 | IS 8377 : 1977 | Bougie, Lister’s and Clutton’s Patterns | Product Specification | 2018, Mar |
| MHD 1 | 89 | IS 8424 : 1977 | Gag, Mouth, Lane’s Pattern | Product Specification | 2018, Mar |
| MHD 1 | 90 | IS 8583 : 1991 | Surgical instruments – Gall duct dilators, Bake’s pattern | Product Specification | 2018, Mar |
| MHD 1 | 91 | IS 8584 : 1992 | Surgical instruments – Peritonium, forceps, Babcock’s pattern – Shapes, sizes and dimensions | Product Specification | 2018, Mar |
| MHD 1 | 92 | IS 8585 : 1977 | Bougie, Oesophageal | Product Specification | 2016, Dec |
| MHD 1 | 93 | IS 8586 : 1977 | Suction Tube, Poole’s Pattern | Product Specification | 2016, Dec |
| MHD 1 | 94 | IS 8853 : 1978 | Retractor, Cheek | Product Specification | 2016, Dec |
| MHD 1 | 95 | IS 8854 : 1978 | Retractor, Czerny’s Pattern | Product Specification | 2016, Dec |
| MHD 1 | 96 | IS 8855 : 1978 | Retractor, Langenbeck’s Pattern | Product Specification | 2016, Dec |
| MHD 1 | 97 | IS 8889 : 1992 | Surgical Instruments – Forceps, Stone, Kidney, Randall’s Pattern – Shapes and Dimensions | Product Specification | 2018, Mar |
| MHD 1 | 98 | IS 8965 : 1978 | Retractor, Deaver’s Pattern | Product Specification | 2016, Dec |
| MHD 1 | 99 | IS 9144 : 1979 | Director and Guide, Cairn’s Pattern | Product Specification | 2016, Dec |
| MHD 1 | 100 | IS 9145 : 1979 | Dilator, Rectal, Hegar’s Pattern | Product Specification | 2016, Dec |
| MHD 1 | 101 | IS 9146 : 1979 | Scissors, Dissecting, Straight and Curved on Flat, Mayo’s Pattern | Product Specification | 2016, Dec |
| MHD 1 | 102 | IS 9149 : 1979 | Probe with Eye | Product Specification | 2016, Dec |
| MHD 1 | 103 | IS 9150 : 1979 | Cylinder, Dermabraison Plastic Surgery | Product Specification | 2016, Dec |
| MHD 1 | 104 | IS 9165 : Part 1 : 1992 | Surgical instruments – Needles, suture Part 1 Specification | Product Specification | 2018, Mar |
| MHD 1 | 105 | IS 9165 : Part 2 : 1992 | Surgical instruments – Needles, suture Part 2 Eyed needles – Sizes, shapes and dimensions | Product Specification | 2018, Mar |
| MHD 1 | 106 | IS 9183 : 1979 | Suction Tube, Magill’s Pattern | Product Specification | 2018, Mar |
| MHD 1 | 107 | IS 9184 : 1979 | Forceps, Disimpaction, Maxillary, for Plastic Surgery | Product Specification | 2016, Dec |
| MHD 1 | 108 | IS 9416 : 1980 | Bladder Sound | Product Specification | 2018, Mar |
| MHD 1 | 109 | IS 9649 : 1980 | Introducer, Catheter, Urethral | Product Specification | 2018, Mar |
| MHD 1 | 110 | IS 9650 : 1980 | Hook, Joseph’s Pattern | Product Specification | 2018, Mar |
| MHD 1 | 111 | IS 9651 : 1980 | Clamp, Intestine Holding, Schoemaker’s Pattern | Product Specification | 2018, Mar |
| MHD 1 | 112 | IS 9689 : 1980 | Microtome Knives | Product Specification | 2018, Mar |
| MHD 1 | 113 | IS/ISO 13402 : 1995 | Surgical And Dental Hand Instruments – Determination of Resistance Against Autoclaving, Corrosion and Thermal Exposure | Methods of tests | 2019, Feb |
| MHD 1 | 114 | IS/ISO 7153 : Part 1 : 2016 | Surgical Instruments — Materials Part 1 Metals | Product Specification | 0 |
| MHD 1 | 115 | IS/ISO 7741 : 1986 | Instruments for Surgery — Scissors and Shears — General Requirements and Test Methods | Product Specification | 0 |
| MHD 2 | 1 | IS 10121 : Part 1 : 1982 | Metal Bone Screws – Mechanical Requirements and Methods of Test – Part 1 : Screws with Asymmetrical Thread, Variable Fitting (spherical), Stainless Steel | Methods of tests | 2016, Feb |
| MHD 2 | 2 | IS 10121 : Part 2 : 1982 | Metal Bone Screws – Mechanical Requirements and Methods of Test – Part II : Screws with Asymmetrical Thread, Constant Fitting (spherical), Stainless Steel | Methods of tests | 2016, Feb |
| MHD 2 | 3 | IS 10128 : 1982 | Pin, Knowles | Product Specification | 2016, Feb |
| MHD 2 | 4 | IS 10155 : 1982 | Blade Plate, Femoral, Lower | Product Specification | 2017, Mar |
| MHD 2 | 5 | IS 10235 : Part 1 : 1982 | Glossary of Terms – Part I : General Medical Terms for Surgical Implants | Terminology | 2016, Feb |
| MHD 2 | 6 | IS 10235 : Part 2 : 1982 | Glossary of terms in orthopaedics Part 2: Mechanics and materials for implants | Terminology | 2016, Feb |
| MHD 2 | 7 | IS 10235 : Part 3 : 1982 | Glossary of terms in orthopaedics Part 3: Orthopaedic surgery | Terminology | 2016, Feb |
| MHD 2 | 8 | IS 10326 : 1982 | Spreader, Plaster Cast, Henning’s Pattern | Product Specification | 2016, Feb |
| MHD 2 | 9 | IS 10327 : 1982 | Bender, Plaster, Bohler’s Pattern | Product Specification | 2016, Feb |
| MHD 2 | 10 | IS 10338 : 1982 | Saw, Plaster, Hand | Product Specification | 2016, Feb |
| MHD 2 | 11 | IS 10349 : 1982 | Rasp for Hip Prothesis, Thompson’s and Moore’s Patterns | Product Specification | 2016, Feb |
| MHD 2 | 12 | IS 10727 : 1983 | Nail, Square, Ulna | Product Specification | 2017, Mar |
| MHD 2 | 13 | IS 10728 : 1983 | Nail, Square, Radius | Product Specification | 2017, Mar |
| MHD 2 | 14 | IS 10729 : 1983 | Nail Set, Kuntscher | Product Specification | 2016, Feb |
| MHD 2 | 15 | IS 10730 : 1983 | Osteotome, Whitchurch Howell’s Pattern | Product Specification | 2016, Feb |
| MHD 2 | 16 | IS 11034 : 2019 | Implants for Surgery ? Guidance on Care and Handling of Orthopaedic Implants ( Second Revision ) | Code of Practice | 0 |
| MHD 2 | 17 | IS 11567 : Part 1 : 1986 | Holes and Slots for Metal Bone Plates – Part 1 : Corresponding to Screws with Asymmetrical Thread and Spherical Under-Surfaces | Dimensions | 2017, Mar |
| MHD 2 | 18 | IS 11567 : Part 3 : 1986 | Holes and Slots in Metal Bone Plates – Part 3 : Corresponding to Screws with Asymmetrical Thread and Conical Under-Surfaces | Dimensions | 2017, Mar |
| MHD 2 | 19 | IS 11567 : Part 4 : 1986 | Holes and Slots in Metal Bone Plates – Part 4 : Corresponding to Screws with Symmetrical Thread and Conical Undersurfaces | Dimensions | 2017, Mar |
| MHD 2 | 20 | IS 11568 : 1986 | Forceps, Bone Holding, Semb’s Pattern | Product Specification | 2017, Mar |
| MHD 2 | 21 | IS 11569 : 1986 | Cervical Collar | Product Specification | 2016, Dec |
| MHD 2 | 22 | IS 11953 : 1986 | Driver and Bender for Rush Intramedullary Pin | Product Specification | 2017, Mar |
| MHD 2 | 23 | IS 12088 : 1987 | Bone Plate, Dynamic Compression | Product Specification | 2018, Feb |
| MHD 2 | 24 | IS 12172 : 1987 | Distraction Cervical Collar | Product Specification | 2018 |
| MHD 2 | 25 | IS 12304 : 1987 | Plastic Cervical Collar | Product Specification | 2018, Feb |
| MHD 2 | 26 | IS 12375 : Part 1 : 2015 | Implants for Surgery – Partial and Total Hip Joint Prostheses Part 1 Classification and Designation of Dimensions ( Second Revision ) | Methods of tests | 2015, Dec |
| MHD 2 | 27 | IS 12375 : Part 2 : 2018 | Implants for Surgery – Partial and Total Hip Joint Prostheses – Part 2 : Bearing Surfaces Made of Metallic and Plastic Materials | Product Specification | 0 |
| MHD 2 | 28 | IS 12375 : Part 4 : 2016 | Implants for Surgery – Partial and Total Hip Joint Prostheses Part 4 Determination of Endurance Properties and Performance of Stemmed Femoral Components ( First Revision ) | Methods of tests | 0 |
| MHD 2 | 29 | IS 12375 : Part 6 : 2018 | Implants for Surgery — Partial and Total Hip Joint Prostheses Part 6 Endurance Properties Testing and Performance Requirements of Neck Region of Stemmed Femoral Components ( First Revision ) | Product Specification | 0 |
| MHD 2 | 30 | IS 12376 : Part 1 : 2015 | Implants for Surgery – Components for Partial and Total Knee Joint Prostheses Part 1 Classification, Definitions and Designation of Dimensions ( Second Revision ) | Terminology | 0 |
| MHD 2 | 31 | IS 13423 : 1992 | Good Manufacturing Practices for Orthopaedic Implants – Guide | Code of Practice | 2018, Feb |
| MHD 2 | 32 | IS 14227 : 1995 | Implants for surgery – Fixation devices for use in the ends of the femur in adults | Product Specification | 2016, Feb |
| MHD 2 | 33 | IS 14228 : 1996 | Implants for Surgery-staples with Parallel Legs for Orthopedic Use – General Requirements | Product Specification | 2016, Feb |
| MHD 2 | 34 | IS 14229 : 1995 | Implants for surgery – Determination of bending strength and stiffness of bone plates | Methods of tests | 2016, Feb |
| MHD 2 | 35 | IS 14239 : Part 1 : 2018 | Orthopaedic Drilling Instruments Part 1 Drill Bits, Taps and Countersink Cutters ( First Revision ) | Product Specification | 0 |
| MHD 2 | 36 | IS 14240 : 1995 | Orthopaedic implants – General requirements for marking packaging and labelling | Others | 2016, Feb |
| MHD 2 | 37 | IS 5089 : 1969 | Blade Plate, Blount Type | Product Specification | 2018, Feb |
| MHD 2 | 38 | IS 5347 : Part 1 : 1986 | Requirements for Orthopedic Implants – Part 1 : General Requirements | Product Specification | 2017, Mar |
| MHD 2 | 39 | IS 5347 : Part 10 : 1987 | Requirements for Orthopaedic Implants – Part 10 : Ultra-High Molecular Weight Polyethylene, Powder Form | Methods of tests | 2017, Mar |
| MHD 2 | 40 | IS 5347 : Part 11 : 1987 | Requirements for Orthopaedic Implants – Part 11 : Ultra-high Molecular Weight Polyethylene, Moulded Form | Methods of tests | 2017, Mar |
| MHD 2 | 41 | IS 5347 : Part 17 : 2002 | Requirements for Orthopaedic Implants – Part 17 : Metallic Materials – Unalloyed Tantalum for Surgical Implant Applications | Methods of tests | 2018, Feb |
| MHD 2 | 42 | IS 5347 : Part 18 : 2002 | Requirements for Orthopaedic Implants – Part 18 : Ceramic Materials Based on Yttria-Stabilized Tetragonal Zirconia (Y-TZP) | Methods of tests | 2018, Feb |
| MHD 2 | 43 | IS 5347 : Part 9 : 1998 | Requirements for Orthopaedic Implants – Part 9 : Ceramic Materials Based on High Purity Alumina | Methods of tests | 2019, Jul |
| MHD 2 | 44 | IS 5393 : 1969 | Screws, Bone | Product Specification | 2017, Mar |
| MHD 2 | 45 | IS 5394 : 1969 | Prostheses, Hip | Product Specification | 2017, Mar |
| MHD 2 | 46 | IS 5395 : Part 1 : 1989 | Surgical Implants – Intramedullary Nailing Systems for Bone Surgery – Part 1 : Intramedullary Nails with Cloverleaf or V-Shaped Cross-Section | Product Specification | 2016, Feb |
| MHD 2 | 47 | IS 5396 : 1969 | Guide Pin for Kuntscher Nail | Product Specification | 2017, Mar |
| MHD 2 | 48 | IS 5397 : 1969 | Reamer, Flexible for Kuntscher Nail (medullary canal) | Product Specification | 2017, Mar |
| MHD 2 | 49 | IS 5574 : 1970 | Forceps, Wire Cutting, Compound Action, Orthopaedic | Product Specification | 2017, Mar |
| MHD 2 | 50 | IS 5580 : 1970 | Chisels, Stille Pattern, Orthopaedic | Product Specification | 2017, Mar |
| MHD 2 | 51 | IS 5581 : 1970 | Stirrup, Bohler’s | Product Specification | 2017, Mar |
| MHD 2 | 52 | IS 5583 : 1970 | Osteotomes, Stille Pattern, Orthopedic | Product Specification | 2017, Mar |
| MHD 2 | 53 | IS 5585 : 1970 | Mallet, Rubber-capped | Product Specification | 2017, Mar |
| MHD 2 | 54 | IS 5589 : 1970 | Saw Handle, Bone Amputation, Orthopaedic | Product Specification | 2017, Mar |
| MHD 2 | 55 | IS 5590 : 1970 | Saw Blade, Bone Amputation | Product Specification | 2017, Mar |
| MHD 2 | 56 | IS 5601 : 1970 | Gouges, Stille Pattern, Orthopedic | Product Specification | 2017, Mar |
| MHD 2 | 57 | IS 5803 : 1970 | Twist Drill Used in Orthopaedic Surgery | Product Specification | 2017, Mar |
| MHD 2 | 58 | IS 5847 : 1970 | Pin Chuck for Introducing Steinman Pins | Product Specification | 2017, Mar |
| MHD 2 | 59 | IS 5848 : 1996 | Implants for Surgery – Skeletal Pins and Wires – Steinmann Skeletal Pins – Dimensions | Product Specification | 2017, Mar |
| MHD 2 | 60 | IS 6187 : 1971 | Saw, Wire (Gigli pattern) | Product Specification | 2017, Mar |
| MHD 2 | 61 | IS 6233 : 1971 | Forceps, Bone Cutting (stille liston pattern) | Product Specification | 2017, Mar |
| MHD 2 | 62 | IS 6252 : 1971 | Scissors Bandage, Lister’s Pattern | Product Specification | 2017, Mar |
| MHD 2 | 63 | IS 6281 : 1971 | Awl, Bone | Product Specification | 2017, Mar |
| MHD 2 | 64 | IS 6289 : 1971 | Staple, Epiphyseal, Orthopedic | Product Specification | 2017, Mar |
| MHD 2 | 65 | IS 6319 : 1971 | Clamp, Bone, Lowman Type | Product Specification | 2017, Mar |
| MHD 2 | 66 | IS 6371 : 1971 | Forceps, Bone Holding, Lane’s, Lane-fagge’s and Fergusson’s Patterns | Product Specification | 2017, Mar |
| MHD 2 | 67 | IS 6484 : 1972 | Forceps, Gouge, Orthopaedic Fergusson’s Pattern | Product Specification | 2017, Mar |
| MHD 2 | 68 | IS 6485 : 1972 | Forceps, Gouge, Angular, Orthopaedic | Product Specification | 2017, Mar |
| MHD 2 | 69 | IS 6486 : 1972 | Forceps, Gouge, Orthopaedic Lane’s Pattern | Product Specification | 2017, Mar |
| MHD 2 | 70 | IS 6501 : 1972 | Forceps, Gouge, Orthopaedic, Stille Luer’s Pattern | Product Specification | 2017, Mar |
| MHD 2 | 71 | IS 6801 : Part 1 : 1999 | Orthopaedic Instruments – Drive Connections – Part 1 : Keys for Use with Screws with Hexagon Socket Heads | Product Specification | 2016, Feb |
| MHD 2 | 72 | IS 6801 : Part 2 : 1987 | Drive Connections for Orthopaedic Instruments – Part 2 : Screw Drivers for Single Slot Head Screws, Screws with Cruciate Slot and Cross-recessed Head Screws | Product Specification | 2018, Feb |
| MHD 2 | 73 | IS 6975 : 1973 | Reamer, Trochanteric, Orthopedic | Product Specification | 2019, Jul |
| MHD 2 | 74 | IS 6976 : 1973 | Awl, Kuntscher, Diamond Pointed | Product Specification | 2018, Feb |
| MHD 2 | 75 | IS 6982 : 1973 | Gauge for Intramedullary Nails | Product Specification | 2018, Feb |
| MHD 2 | 76 | IS 7055 : 1973 | Drivers, Kuntscher, Nail, Orthopaedic | Product Specification | 2018, Feb |
| MHD 2 | 77 | IS 7102 : 1973 | Screw, Bone, Leinbach, Medullary | Product Specification | 2018, Feb |
| MHD 2 | 78 | IS 7105 : Part 1 : 1973 | Extractor for Kuntscher Nail – Part 1 : Handle type | Product Specification | 2018, Feb |
| MHD 2 | 79 | IS 7105 : Part 2 : 1986 | Extractor for Kuntscher Nail – Part 2 : Striker Type | Product Specification | 2017, Mar |
| MHD 2 | 80 | IS 7106 : 1973 | Extractor, Staple, Orthopaedic | Product Specification | 2018, Feb |
| MHD 2 | 81 | IS 7107 : 1973 | Punch, Staple, Orthopaedic | Product Specification | 2018, Feb |
| MHD 2 | 82 | IS 7108 : 1973 | Hammer for Kuntscher Nail Extractor | Product Specification | 2018, Feb |
| MHD 2 | 83 | IS 7109 : 1973 | Starter, Staple, Orthopaedic | Product Specification | 2018, Feb |
| MHD 2 | 84 | IS 7110 : 1984 | Pins, Rush, Intramedullary | Product Specification | 2017, Mar |
| MHD 2 | 85 | IS 7111 : 1973 | Inserter, Staple, Orthopaedic | Product Specification | 2018, Feb |
| MHD 2 | 86 | IS 7398 : 1974 | Forceps, Bone Holding, Farabeuf’s Pattern | Product Specification | 2018, Feb |
| MHD 2 | 87 | IS 7435 : 1974 | Rongeur, Ruskin’s Pattern | Product Specification | 2018, Feb |
| MHD 2 | 88 | IS 7442 : 1974 | Forceps, Bone Cutting, Straight and Angular, Liston’s Pattern | Product Specification | 2018, Feb |
| MHD 2 | 89 | IS 7629 : 1975 | Bender, Plate, Orthopedic | Product Specification | 2018, Feb |
| MHD 2 | 90 | IS 7650 : 1975 | Drill, Hand, Bone, Universal, Micro and Kirschner | Product Specification | 2018, Feb |
| MHD 2 | 91 | IS 7817 : 1975 | Impactor for Hip Prosthesis | Product Specification | 2018, Feb |
| MHD 2 | 92 | IS 7818 : 1975 | Broach, Moore Type, for Hip Prosthesis | Product Specification | 2018, Feb |
| MHD 2 | 93 | IS 7819 : 1975 | Mallet, Nylon Headed, Orthopedic | Product Specification | 2018, Feb |
| MHD 2 | 94 | IS 7841 : 1975 | Compression Plate, Muller Type | Product Specification | 2018, Feb |
| MHD 2 | 95 | IS 7846 : 1975 | Extractor for Hip Prosthesis | Product Specification | 2018, Feb |
| MHD 2 | 96 | IS 8261 : Part 1 : 1976 | Pins and Wires, Skeletal, Traction – Part I : Kirschner Wires | Product Specification | 2018, Feb |
| MHD 2 | 97 | IS 8261 : Part 2 : 1976 | Pins and Wires, Skeletal, Traction – Part II : Guide Wires | Product Specification | 2018, Feb |
| MHD 2 | 98 | IS 8261 : Part 3 : 1976 | Pins and Wires, Skeletal, Traction – Part III : Pins and Wires, Fixation and Threaded | Product Specification | 2018, Feb |
| MHD 2 | 99 | IS 8261 : Part 4 : 1998 | Pins and wires skeletal traction Part 4: Material and mechanical requirements | Product Specification | 2018, Feb |
| MHD 2 | 100 | IS 8332 : 1977 | Handle, Saw, Gigli | Product Specification | 2018, Feb |
| MHD 2 | 101 | IS 8608 : 1977 | Countersinks, Pilot Type, for Orthopedic Use | Product Specification | 2018, Feb |
| MHD 2 | 102 | IS 8641 : 2015 | Implants for Surgery – Acrylic Resin Cements ( Third Revision ) | Product Specification | 2015, Dec |
| MHD 2 | 103 | IS 8755 : 1977 | Method for Testing for Biological Compatibility of Metals for Surgical Implants | Methods of tests | 2018, Feb |
| MHD 2 | 104 | IS 8922 : 1978 | Depth Gauge for Orthopedic Use | Product Specification | 2017, Mar |
| MHD 2 | 105 | IS 8926 : 1978 | Bone Skid, Murphy Lane’s Pattern | Product Specification | 2017, Mar |
| MHD 2 | 106 | IS 9265 : 1979 | Clamp, Compression, Muller’s Pattern | Product Specification | 2017, Mar |
| MHD 2 | 107 | IS 9829 : Part 1 : 1996 | Implants for surgery – Metal bone screws Part 1 With hexagonal drive connection spherical under surface of head, asymmetrical thread – Dimensions | Product Specification | 2017, Mar |
| MHD 2 | 108 | IS 9829 : Part 2 : 1996 | Implants for surgery – Metal bone screws Part 2 With conical under-surface head – Dimensions | Product Specification | 2017, Mar |
| MHD 2 | 109 | IS/ISO 12891 : Part 1 : 2015 | Retrieval and Analysis of Surgical Implants Part 1 Retrieval and Handling | Others | 0 |
| MHD 2 | 110 | IS/ISO 12891 : Part 2 : 2014 | Retrieval and Analysis of Surgical Implants Part 2 Analysis of Retrieved Surgical Implants | Others | 0 |
| MHD 2 | 111 | IS/ISO 13356 : 2015 | Implants for Surgery — Ceramic Materials Based on Yttria-Stabilized Tetragonal Zirconia ( Y-TZP ) | Product Specification | 0 |
| MHD 2 | 112 | IS/ISO 13781 : 2017 | Implants for Surgery ― Homopolymers, Copolymers and Blends on Poly ( Lactide ) — In vitro Degradation Testing | Methods of tests | 0 |
| MHD 2 | 113 | IS/ISO 21534 : 2007 | Non-Active Surgical Implants — Joint Replacement Implants — Particular Requirements | Product Specification | 0 |
| MHD 2 | 114 | IS/ISO 21535 : 2007 | Non-Active Surgical Implants — Joint Replacement Implants — Specific Requirements for Hip-Joint Replacement Implants | Product Specification | 0 |
| MHD 2 | 115 | IS/ISO 21536 : 2007 | Non-Active Surgical Implants — Joint Replacement Implants — Specific Requirements for Knee- Joint Replacement Implants | Product Specification | 0 |
| MHD 2 | 116 | IS/ISO 5832 (Part 4) : 2014 | Implants for Surgery — Metallic Materials Part 4 Cobalt-Chromium-Molybdenum Casting Alloy | 0 | |
| MHD 2 | 117 | IS/ISO 5832 : Part 1 : 2016 | Implants for Surgery ― Metallic Materials Part 1 Wrought Stainless Steel | Product Specification | 0 |
| MHD 2 | 118 | IS/ISO 5832 : Part 11 : 2014 | Implants for Surgery ― Metallic Materials Part 11 Wrought Titanium 6-Aluminium 7-Niobium Alloy | Product Specification | 0 |
| MHD 2 | 119 | IS/ISO 5832 : Part 6 : 1997 | Implants for Surgery ― Metallic Materials Part 6 Wrought Cobalt-Nickel- Chromium-Molybdenum Alloy | Product Specification | 0 |
| MHD 2 | 120 | IS/ISO 5832 : Part 7 : 2016 | Implants for Surgery ― Metallic Materials Part 7 Forgeable and Cold-Formed Cobalt-Chromium-Nickel-Molybdenum-Iron Alloy | Product Specification | 0 |
| MHD 2 | 121 | IS/ISO 5832-2 : 2018 | Implants for Surgery ? Metallic Materials Part 2 Unalloyed Titanium ( First Revision ) | Product Specification | 0 |
| MHD 2 | 122 | IS/ISO 5832-3 : 2016 | Implants for Surgery ? Metallic Materials Part 3 Wrought Titanium 6-Aluminium 4-Vanadium Alloy ( First Revision ) | Methods of tests | 0 |
| MHD 2 | 123 | IS/ISO 5832-5 : 2005 | Implants for Surgery – Metallic Materials Part 5 Wrought Cobalt-Chromium-Tungsten-Nickel Alloy | Methods of tests | 2019, Jul |
| MHD 2 | 124 | IS/ISO 5832-8 : 1997 | Implants for Surgery – Metallic Materials Part 8 Wrought Cobalt-Nickel-Chromium-Molybdenum- Tungsten-Iron Alloy | Methods of tests | 2019, Jul |
| MHD 2 | 125 | IS/ISO 5832-9 : 2007 | Implants for Surgery – Metallic Materials Part 9 Wrought High Nitrogen Stainless Steel | Methods of tests | 2019, Jul |
| MHD 2 | 126 | IS/ISO 5834 : Part 1 : 2005 | Implants for Surgery – Ultra-High- Molecular-Weight Polyethylene Part 1 Powder Form | Product Specification | 2016, Jan |
| MHD 2 | 127 | IS/ISO 5834 : Part 2 : 2011 | Implants for Surgery – Ultra-High – Molecular-Weight Polyethylene Part 2 Moulded Forms | Product Specification | 2016, Jan |
| MHD 2 | 128 | IS/ISO 5838 : Part 1 : 2013 | Implants for Surgery Metallic Skeletal Pins and Wires Part 1 General Requirements | Product Specification | 0 |
| MHD 2 | 129 | IS/ISO 6474 : Part 1 : 2010 | Implants for Surgery – Ceramic Materials Part 1 Ceramic Materials Based on High Purity Alumina | Product Specification | 2016, Jan |
| MHD 2 | 130 | IS/ISO 6474 : Part 2 : 2012 | Implants for Surgery ― Ceramic Materials Part 2 Composite Materials Based on a High-Purity Alumina Matrix with Zirconia Reinforcement | Product Specification | 0 |
| MHD 3 | 1 | IS 10156 : 1982 | Cannula, Intra-uterine, Hysterosalpingography | Product Specification | 2015 |
| MHD 3 | 2 | IS 10545 : 1992 | Gynaecological and obstetric instruments – Clamp, curved on flat, Heaney’s pattern – Shape and dimensions | Product Specification | 2012 |
| MHD 3 | 3 | IS 12256 : 1988 | Curette, Uterine, Biopsy, Angled | Product Specification | 2015 |
| MHD 3 | 4 | IS 12270 : 1988 | Cannula, Spackmann’s Pattern | Product Specification | 2015 |
| MHD 3 | 5 | IS 12271 : 1988 | Laproscopic Trocar and Cannula | Product Specification | 2015 |
| MHD 3 | 6 | IS 13009 : 2000 | Contraceptive Devices – Tubal Ring | Product Specification | 2015 |
| MHD 3 | 7 | IS 5829 : 1982 | Sound, Uterine | Product Specification | 2012 |
| MHD 3 | 8 | IS 5849 : 1970 | Retractor, Anterior Vaginal Wall (Sim’s pattern) | Product Specification | 2012 |
| MHD 3 | 9 | IS 5906 : 1970 | Speculum, Vaginal (Cusco’s pattern) | Product Specification | 2012 |
| MHD 3 | 10 | IS 6111 : 1971 | Curette, Uterine (Suction Type) | Product Specification | 2012 |
| MHD 3 | 11 | IS 6112 : 1971 | Speculum, Vaginal, Double Ended (Sim’s Pattern) | Product Specification | 2012 |
| MHD 3 | 12 | IS 6114 : 1991 | Gynaecological instruments – Forceps, uterine vulsellum – Shape and dimensions | Product Specification | 2016, Dec |
| MHD 3 | 13 | IS 6115 : 1991 | Gynaecological instruments – Forceps, uterine tenaculum – Shape and dimensions | Product Specification | 2016, Dec |
| MHD 3 | 14 | IS 6373 : 1971 | Sucker, Mucus | Product Specification | 2012 |
| MHD 3 | 15 | IS 6499 : 1971 | Curette, Uterine, Double-ended, Sharp, Sim’s Pattern | Product Specification | 2012 |
| MHD 3 | 16 | IS 6505 : 1971 | Curette, Uterine, Double-ended, Sharp and Blunt, Sim’s Pattern | Product Specification | 2012 |
| MHD 3 | 17 | IS 6510 : 1971 | Curette, Endometrial Biopsy, Suction Type | Product Specification | 2012 |
| MHD 3 | 18 | IS 6565 : 1972 | Stethoscope (foetoscope ) for – Foetal Heart Sounds, Pinard’s Pattern | Product Specification | 2012 |
| MHD 3 | 19 | IS 6578 : 1992 | Obstetric Instruments – Forceps,, ovum – Shape and dimensions | Product Specification | 2012 |
| MHD 3 | 20 | IS 6584 : 1972 | Dilators, Uterine, Single Ended, Hegar’s Pattern | Product Specification | 2012 |
| MHD 3 | 21 | IS 6589 : 1992 | Gynaecological Instruments – Forceps, uterine, dressing, Bozemann’s pattern – Shape and dimensions | Product Specification | 2012 |
| MHD 3 | 22 | IS 6957 : 1973 | Curette, Blunt, Uterine | Product Specification | 2012 |
| MHD 3 | 23 | IS 6958 : 1973 | Knife, Decapitation | Product Specification | 2012 |
| MHD 3 | 24 | IS 6959 : 1973 | Embryotomy Scissors, Embryotomy, Curved on Flat | Product Specification | 2012 |
| MHD 3 | 25 | IS 6960 : 1973 | Catheters, Metal, Female | Product Specification | 2012 |
| MHD 3 | 26 | IS 6999 : 1973 | Cannula, Artificial Insemination | Product Specification | 2012 |
| MHD 3 | 27 | IS 7080 : Part 1 : 1992 | MTP Suction Apparatus – Part 1 : Manually Operated | Product Specification | 2012 |
| MHD 3 | 28 | IS 7080 : Part 2 : 1992 | MTP Suction Apparatus – Part 2 : Electrical-cum-manually Operated | Product Specification | 2012 |
| MHD 3 | 29 | IS 7080 : Part 3 : 1992 | MTP Suction Apparatus – Part 3 : Electrically Operated | Product Specification | 2012 |
| MHD 3 | 30 | IS 7100 : 1973 | Hook, Decapitation, Jardine’s Pattern | Product Specification | 2012 |
| MHD 3 | 31 | IS 7103 : 1973 | Scissors, Episiotomy | Product Specification | 2012 |
| MHD 3 | 32 | IS 7115 : 1973 | Apparatus, Tubal Patency | Product Specification | 2012 |
| MHD 3 | 33 | IS 7116 : 1973 | Forceps, Midwifery, Short | Product Specification | 2012 |
| MHD 3 | 34 | IS 7117 : 1973 | Scissors, Umbilical Cord | Product Specification | 2012 |
| MHD 3 | 35 | IS 7432 : 1974 | Clamp, Myomectomy, Bonney’s Pattern | Product Specification | 2012 |
| MHD 3 | 36 | IS 7433 : 1992 | Obstetrics Instruments – Forceps, round ligament, Bonney’s pattern – Shape and dimensions | Product Specification | 2012 |
| MHD 3 | 37 | IS 7475 : 1992 | Obstetrics Instruments – Clamp, vaginal, angled – Shape and dimensions | Product Specification | 2012 |
| MHD 3 | 38 | IS 7480 : 1974 | Perforator, Simpson’s Pattern | Product Specification | 2012 |
| MHD 3 | 39 | IS 7484 : 1974 | Retractor, Vaginal, Purandare’s Pattern | Product Specification | 2012 |
| MHD 3 | 40 | IS 7725 : 1975 | Hook, IUCD, Shirodkar’s Pattern | Product Specification | 2012 |
| MHD 3 | 41 | IS 7735 : 1992 | Forceps, spong holding – Shape and dimensions | Product Specification | 2012 |
| MHD 3 | 42 | IS 7736 : 1975 | Screw, Myoma | Product Specification | 2012 |
| MHD 3 | 43 | IS 7737 : 1975 | Forceps, Punch, Cervical Biopsy | Product Specification | 2012 |
| MHD 3 | 44 | IS 7964 : 1992 | Obstetric Instruments – Forceps, Caesarean section, haemostasis, Green-Armytage pattern – Shape and dimensions | Product Specification | 2012 |
| MHD 3 | 45 | IS 7981 : Part 1 : 1976 | Instruments, Tuboplasty – Part I : Occluder, Cervical, Shirodkar’s Pattern | Product Specification | 2012 |
| MHD 3 | 46 | IS 7981 : Part 2 : 1976 | Specification For Instruments. Tuboplasty – Part II : Cannula, Shirodkar’s Pattern | Product Specification | 2012 |
| MHD 3 | 47 | IS 7981 : Part 3 : 1976 | Instruments, Tuboplasty – Part III : Guide, Shirodkar’s Pattern | Product Specification | 2012 |
| MHD 3 | 48 | IS 7981 : Part 4 : 1976 | Instruments, Tuboplasty – Part IV : Probe, Single Ended, Shirodkar’s Pattern | Product Specification | 2012 |
| MHD 3 | 49 | IS 7981 : Part 5 : 1976 | Instruments, Tuboplasty – Part V : Probe, Double-Ended, Shirodkar’s Pattern | Product Specification | 2012 |
| MHD 3 | 50 | IS 8313 : 1977 | Cannula, Flexible, Karman Type | Product Specification | 2012 |
| MHD 3 | 51 | IS 8314 : 1977 | Forceps, Midwifery, Modified Kedarnath Das’ Pattern, without Axis Traction | Product Specification | 2012 |
| MHD 3 | 52 | IS 8342 : 1977 | Forceps, Midwifery, Modified Kedarnath Das’s Pattern, with Axis Traction | Product Specification | 2012 |
| MHD 3 | 53 | IS 8458 : 1977 | Manipulators, Uterine, Dr Purandare’s Pattern | Product Specification | 2012 |
| MHD 3 | 54 | IS 8459 : 1977 | Menstrual Regulation Syringe | Product Specification | 2012 |
| MHD 3 | 55 | IS 9756 : 1981 | Cups, Vacuum Extraction | Product Specification | 2012 |
| MHD 3 | 56 | IS/ISO 16037 : 2002 | Rubber condoms for clinical trials – Measurement of physical properties | Methods of tests | 2014 |
| MHD 3 | 57 | IS/ISO 16038 : 2005 | Rubber Condoms — Guidance On The Use Of–Is/iso 4074 In The Quality Management Of–Natural Rubber Latex Condoms | Code of Practice | 2014 |
| MHD 3 | 58 | IS/ISO 23409 : 2015 | Male Condoms – Requirements and Test Methods for Condoms Made from Synthetic Materials | Methods of tests | 0 |
| MHD 3 | 59 | IS/ISO 25841 : 2014 | Female Condoms — | 0 | |
| MHD 3 | 60 | IS/ISO 29941 : 2010 | Condoms – Determination of Nitrosamines Migrating from Natural Rubber Latex Condoms | Methods of tests | 2015, May |
| MHD 3 | 61 | IS/ISO 29942 : 2011 | Prophylactic Dams Requirements and Test Methods | Product Specification | 2015, Jan |
| MHD 3 | 62 | IS/ISO 4074 : 2015 | Natural Rubber Latex Male Condoms – Requirements and Test Methods | Product Specification | 0 |
| MHD 3 | 63 | IS/ISO 7439 : 2015 | Copper-Bearing Contraceptive Intrauterine Devices — Requirements and Tests ( First Revision ) | Product Specification | 0 |
| MHD 3 | 64 | IS/ISO 8009 : 2014 | Mechanical Contraceptives – Reusable Natural And Silicone Rubber Contraceptive Diaphragms – Requirements And Tests | Product Specification | 0 |
| MHD 4 | 1 | IS 10272 : 1982 | Draffin Suspension Apparatus | Product Specification | 2016, Dec |
| MHD 4 | 2 | IS 10308 : 1982 | Tracheostomy Tubes and Guides, Cubley’s Pattern | Product Specification | 2016, Dec |
| MHD 4 | 3 | IS 10344 : 1982 | Gag Frame, Davis-Boyle, and Tongue Plates | Product Specification | 2016, Dec |
| MHD 4 | 4 | IS 10725 : 1983 | Knife, Myringotomy | Product Specification | 2016, Dec |
| MHD 4 | 5 | IS 10726 : 1983 | Knife, Meatal Skin Incision | Product Specification | 2016, Dec |
| MHD 4 | 6 | IS 10786 : 1984 | Mirror, Rhinoscopic, ST. Clair Thomson’s Pattern | Product Specification | 2016, Dec |
| MHD 4 | 7 | IS 10846 : 1984 | Speculum, Nasal, Killian’s Pattern | Product Specification | 2016, Dec |
| MHD 4 | 8 | IS 11318 : 1985 | Bronchoscope, Aspirating, Negus’ Pattern | Product Specification | 2016, Dec |
| MHD 4 | 9 | IS 11319 : 1985 | Oesophagoscope, Negus’ Pattern | Product Specification | 2016, Dec |
| MHD 4 | 10 | IS 12901 : 1990 | ENT Surgery Instruments – Laryngeal Fine Grasping Forceps, Crocodile Jaws, Straight | Product Specification | 2016, Dec |
| MHD 4 | 11 | IS 12911 : 1990 | ENT Surgery Instruments – Laryngeal Forceps, Oval Cup | Product Specification | 2016, Dec |
| MHD 4 | 12 | IS 13169 : 1991 | Ent Surgery Instruments – Head Mirror | Product Specification | 2016, Jan |
| MHD 4 | 13 | IS 13179 : 1991 | Ent Surgery Instruments – Tracheostomy Tubes, Chevaliar Jackson’s Pattern | Product Specification | 2016, Dec |
| MHD 4 | 14 | IS 3758 : 2018 | Hooks, Aural – Specification (First Revision) | Product Specification | 0 |
| MHD 4 | 15 | IS 3760 : 1966 | Probe, Aural, Jobson Horne’s Pattern | Product Specification | 2018, Feb |
| MHD 4 | 16 | IS 3788 : 1966 | Specula, Aural | Product Specification | 2018, Feb |
| MHD 4 | 17 | IS 3799 : 2019 | Forceps, Aural and Nasal, Crocodile Action — Specification ( First Revision ) | Product Specification | 0 |
| MHD 4 | 18 | IS 3807 : 2000 | ENT Surgery Instruments – Forceps, Dressing, Aural and Nasal | Product Specification | 2018, Feb |
| MHD 4 | 19 | IS 4487 : 2000 | ENT Surgery Instruments – Forceps, Tonsil Artery (Birkett’s Pattern) | Product Specification | 2018, Feb |
| MHD 4 | 20 | IS 4488 : 2018 | Forceps, Tonsil Holding (Muck’s and White’s Patterns) — Specification ( First Revision ) | Product Specification | 0 |
| MHD 4 | 21 | IS 4489 : 2018 | Forceps, Nasal Turbinate, Luc’s — Specification ( First Revision ) | Product Specification | 0 |
| MHD 4 | 22 | IS 4504 : 2018 | Forceps, Peritonsillar – Specification (First Revision) | Product Specification | 0 |
| MHD 4 | 23 | IS 4514 : 2018 | Forceps, Tonsil Dissecting (Waugh’s Pattern) — Specification ( First Revision ) | Product Specification | 0 |
| MHD 4 | 24 | IS 4520 : 2018 | Forceps, Punch, Nasal (Citelli’s Antrum and Hajek’s Sphenoidal) — Specification ( First Revision ) | Product Specification | 0 |
| MHD 4 | 25 | IS 4959 : 2018 | Raspatory, Nasal, Howarth’s — Specification ( First Revision ) | Product Specification | 0 |
| MHD 4 | 26 | IS 4994 : 1968 | Forceps, Redressing, Walsham’s, Right, Left and Straightening | Product Specification | 2018, Feb |
| MHD 4 | 27 | IS 5140 : 1969 | Auriscope | Product Specification | 2018, Feb |
| MHD 4 | 28 | IS 5147 : 1969 | Examination Lamp with Bull’s Eye Condenser (Floor Model) | Product Specification | 2018, Mar |
| MHD 4 | 29 | IS 5338 : 1969 | Catheter, Eustachian | Product Specification | 2018, Feb |
| MHD 4 | 30 | IS 5377 : 1969 | Speculum, Nasal, Thudichum’s | Product Specification | 2018, Feb |
| MHD 4 | 31 | IS 5412 : 1969 | Saws, Nasal, Joseph’s Pattern | Product Specification | 2018, Feb |
| MHD 4 | 32 | IS 5720 : 1970 | Retractor, Mastold, Self-Retaining (Mollison’s pattern) | Product Specification | 2018, Feb |
| MHD 4 | 33 | IS 5723 : 1970 | Mallet with Fluted Handle for ENT Surgery | Product Specification | 2018, Feb |
| MHD 4 | 34 | IS 5732 : 1970 | Gouge, Mastoid (Jenkins’ Pattern) | Product Specification | 2018, Feb |
| MHD 4 | 35 | IS 5747 : 1970 | Retractor, Endaural (Lempert’s Pattern) | Product Specification | 2018, Feb |
| MHD 4 | 36 | IS 6463 : 1972 | Burs, Antrum (Tilley’s Pattern) | Product Specification | 2018, Feb |
| MHD 4 | 37 | IS 6464 : 2000 | ENT Diagnostic Instruments – Tuning Forks (Gardiner Brown’s Pattern) | Product Specification | 2018, Feb |
| MHD 4 | 38 | IS 6465 : 1972 | Trocar, Antral, with Cannula (Tilley Lichtwitz’ Pattern) | Product Specification | 2018, Feb |
| MHD 4 | 39 | IS 6514 : 1972 | Nasal Cartilage Knife (Ballenger’s Pattern) | Product Specification | 2018, Feb |
| MHD 4 | 40 | IS 7007 : 1973 | E.E.N.T. (Eye, Ear, Nose and Throat) Diagnostic Set | Product Specification | 2016, Dec |
| MHD 4 | 41 | IS 7282 : 1975 | Chisel, Labyrinth, Straight, Lake’s Pattern | Product Specification | 2018, Feb |
| MHD 4 | 42 | IS 7710 : 1975 | Snare, Tonsil, Eve’s Pattern | Product Specification | 2018, Feb |
| MHD 4 | 43 | IS 7711 : 1975 | Curette, Adenoid, Beckmann’s Pattern | Product Specification | 2018, Feb |
| MHD 4 | 44 | IS 7712 : 1975 | Curette, Adenoid, St. Clair Thomson’s Pattern | Product Specification | 2018, Feb |
| MHD 4 | 45 | IS 7713 : 1975 | Retractor, Light Model, Weislander’s Pattern | Product Specification | 2018, Feb |
| MHD 4 | 46 | IS 7756 : 1975 | Depressor, Tongue, Lack’s Pattern | Product Specification | 2018, Feb |
| MHD 4 | 47 | IS 8093 : 1976 | Curette, Ballance’s pattern | Product Specification | 2018, Feb |
| MHD 4 | 48 | IS 8094 : 1976 | Hook, Cerumen, Cawthorne’s Pattern | Product Specification | 2018, Feb |
| MHD 4 | 49 | IS 8128 : 1976 | Elevator, Farabeuf’s Pattern | Product Specification | 2018, Feb |
| MHD 4 | 50 | IS 8129 : 1976 | Forceps, Tonsil Artery, Curved, Scott’s Pattern | Product Specification | 2016, Dec |
| MHD 4 | 51 | IS 8136 : 1976 | Seeker, Dundas Grant’s Pattern | Product Specification | 2018, Feb |
| MHD 4 | 52 | IS 8157 : 1976 | Forceps, Granulation, Heath’s Pattern | Product Specification | 2018, Feb |
| MHD 4 | 53 | IS 8191 : 1976 | Retractor, Pillar, Anterior and Tonsil Enucleator, Mollison’s Pattern | Product Specification | 2018, Feb |
| MHD 4 | 54 | IS 8199 : 1976 | Tracheostomy Tubes, Fuller’s Pattern | Product Specification | 2018, Feb |
| MHD 4 | 55 | IS 8315 : 1977 | Forceps, Redressing, Asch’s Pattern | Product Specification | 2018, Feb |
| MHD 4 | 56 | IS 8316 : 1977 | Retractor, Hajek’s Pattern | Product Specification | 2016, Jan |
| MHD 4 | 57 | IS 8327 : 1977 | Forceps, Nodule, Vocal, Chevalier Jackson’s Pattern | Product Specification | 2016, Jan |
| MHD 4 | 58 | IS 8343 : 1977 | Forceps, Biopsy, Peterson’s Pattern | Product Specification | 2016, Jan |
| MHD 4 | 59 | IS 8344 : 1977 | Snare, Aural, Glegg’s Pattern | Product Specification | 2016, Jan |
| MHD 4 | 60 | IS 8734 : 1978 | Forceps, Cutting and Removing Large Specimens, Chevalier Jackson’s Pattern | Product Specification | 2016, Jan |
| MHD 4 | 61 | IS 8735 : 1978 | Tube, Suction, Yankauer’s Pattern | Product Specification | 2016, Jan |
| MHD 4 | 62 | IS 8743 : 1994 | ENT surgery instruments – Forceps, direct bronchoscopy, with alligator jaws and tenaculum points, Irwin Moore’s pattern | Product Specification | 2016, Jan |
| MHD 4 | 63 | IS 8825 : 1978 | Cannula, Suction Irrigation with Locking Device, Microlaryngeal | Product Specification | 2016, Jan |
| MHD 4 | 64 | IS 8837 : 1978 | Suction Tubes with Stylet Microlaryngeal Surgery | Product Specification | 2016, Jan |
| MHD 4 | 65 | IS 8838 : 1978 | Forceps, Cup, Straight, Microlaryngel Surgery | Product Specification | 2016, Jan |
| MHD 4 | 66 | IS 8839 : 1978 | Forceps, Cup Upwards, Microlaryngeal Surgery | Product Specification | 2016, Jan |
| MHD 4 | 67 | IS 8840 : 1978 | Scissors, Microlaryngeal Surgery | Product Specification | 2016, Jan |
| MHD 4 | 68 | IS 9014 : 1979 | Raspatory, Fine, Curved Right, Zoellner’s Pattern | Product Specification | 2016, Jan |
| MHD 4 | 69 | IS 9015 : 1979 | Raspatory, Fine, Curved Left, Zoellner’s Pattern | Product Specification | 2016, Jan |
| MHD 4 | 70 | IS 9016 : 1979 | Needle, Fine, Spear Pointed, Curved Right, Zoellner’s Pattern | Product Specification | 2016, Jan |
| MHD 4 | 71 | IS 9017 : 1979 | Needle, Fine, Spear Pointed, Curved Left, Zoellner’s Pattern | Product Specification | 2016, Jan |
| MHD 4 | 72 | IS 9058 : 1979 | Knife, Upward Cutting, Zoellner’s Pattern | Product Specification | 2016, Jan |
| MHD 4 | 73 | IS 9059 : 1979 | Knife, Downward Cutting, Zoellner’s Pattern | Product Specification | 2016, Jan |
| MHD 4 | 74 | IS 9060 : 1979 | Hook, Small, Zoellner’s Pattern | Product Specification | 2016, Jan |
| MHD 4 | 75 | IS 9479 : 1980 | Hook, Fenestra, 25°, 45°, and 90° Angle Ear, Shea’s Pattern | Product Specification | 2018, Feb |
| MHD 4 | 76 | IS 9480 : 1980 | Elevators, Left and Right, Ear, Shea’s Pattern | Product Specification | 2018, Feb |
| MHD 4 | 77 | IS 9526 : 1980 | Scissors, Stapedectomy, Crocodile Jaw | Product Specification | 2018, Feb |
| MHD 4 | 78 | IS 9544 : 1980 | Forceps, Stapedectomy, Round Cup, Elongated Cup and Oval Cup Jaws | Product Specification | 2018, Feb |
| MHD 4 | 79 | IS 9558 : 1980 | Gauge, Depth, Ptfe (Teflon) Piston | Product Specification | 2018, Feb |
| MHD 4 | 80 | IS 9564 : 1980 | Forceps, Stapedectomy, Serrated, Smooth And Mc Gee Wire Closing Jaws | Product Specification | 2018, Feb |
| MHD 4 | 81 | IS 9718 : 1981 | Jig, Cutting, PTFE Piston | Product Specification | 2018, Feb |
| MHD 5 | 1 | IS 10009 : 1981 | Breaker and Holder, Razor Blade, Barraquer’s Pattern | Product Specification | 2018, Feb |
| MHD 5 | 2 | IS 10045 : 1981 | Punch, Lacrymal Bone, Beyer’s Pattern | Product Specification | 2018, Feb |
| MHD 5 | 3 | IS 10058 : 1985 | Forceps, Fixation, Graefe’s Pattern (Modified) | Product Specification | 2017, Mar |
| MHD 5 | 4 | IS 10389 : 1983 | Fixation Hook, Eye, Guthrie’s Pattern | Product Specification | 2013 |
| MHD 5 | 5 | IS 10390 : 1983 | Muscle Hook | Product Specification | 2013 |
| MHD 5 | 6 | IS 10408 : 1983 | Spatula, Eye, Green’s Pattern | Product Specification | 2013 |
| MHD 5 | 7 | IS 10696 : 1983 | Round Segment Fused Bifocal Blanks | Product Specification | 2013 |
| MHD 5 | 8 | IS 10847 : 1984 | Speculum with Screw Adjustment, Eye, Right and Left, Arruga’s Pattern | Product Specification | 2013 |
| MHD 5 | 9 | IS 10848 : 1984 | Irrigator Anterior Chamber, Eye, Bishop Harmann’s Pattern | Product Specification | 2013 |
| MHD 5 | 10 | IS 11244 : 1985 | Trephine, Bone Lacrimal with Handle | Product Specification | 2017, Mar |
| MHD 5 | 11 | IS 12947 : 1990 | Eye surgery instruments – Tonometers | Product Specification | 2015, Oct |
| MHD 5 | 12 | IS 13783 : 1993 | Optics and Optical Instruments – Ophthalmology – Graduated Dial Scale | Product Specification | 2013 |
| MHD 5 | 13 | IS 14895 : 2000 | Ophthalmic Instruments – Spuds, Foreign Body – Waltons Sizes 1 and 1.5 mm Wide, Stainless Steel | Product Specification | 2015, Dec |
| MHD 5 | 14 | IS 4382 : 1967 | Non-tinted Ophthalmic Glass | Product Specification | 2017, Mar |
| MHD 5 | 15 | IS 4569 : Part 1 : 1985 | Scissors, Eye – Part 1 : Corneal | Product Specification | 2017, Mar |
| MHD 5 | 16 | IS 4569 : Part 2 : 1985 | Scissors, Eye – Part 2 : Conjunctival, Blunt and Sharp-point Scissors | Product Specification | 2017, Mar |
| MHD 5 | 17 | IS 4569 : Part 3 : 1985 | Scissors, eye – Part 3 : Scissors, Tenotomy | Product Specification | 2017, Mar |
| MHD 5 | 18 | IS 4569 : Part 4 : 1985 | Scissors, Eye – Part 4 : Scissors, Enucleation | Product Specification | 2017, Mar |
| MHD 5 | 19 | IS 4569 : Part 5 : 1985 | Scissors, Eye – Part 5 : Scissors, Spring Action, Vanna’s Pattern (Modified) | Product Specification | 2017, Mar |
| MHD 5 | 20 | IS 4569 : Part 6 : 1985 | Scissors, Eye – Part 6 : Scissors, Iris | Product Specification | 2017, Mar |
| MHD 5 | 21 | IS 4790 : 1989 | Eye Surgery Instruments – Knife, Corneal Splitting, Lang’s and Tooke’s Pattern (Modified) | Product Specification | 2013 |
| MHD 5 | 22 | IS 4978 : 1985 | Forceps, Eye, Fixation (Toothed) | Product Specification | 2017, Mar |
| MHD 5 | 23 | IS 5157 : 1981 | Forceps, Eye, Iris | Product Specification | 2018, Feb |
| MHD 5 | 24 | IS 5232 : 1990 | Eye Surgery Instruments – Forceps, Eye, Cilia, Beer’s Pattern (modified) | Product Specification | 2015, Oct |
| MHD 5 | 25 | IS 5367 : 1969 | Forceps, Eye, Strabismus for Advancement (Prince’s and Worth’s Patterns) | Product Specification | 2017, Mar |
| MHD 5 | 26 | IS 5668 : 1989 | Eye surgery instruments – Forceps, eye dissecting, serrated, fine | Product Specification | 2013 |
| MHD 5 | 27 | IS 5678 : 1970 | Forceps, Eye, Conjunctival, Suture (Moorfield’s Pattern) | Product Specification | 2018, Feb |
| MHD 5 | 28 | IS 5721 : 1970 | Forceps, Eye, Peripheral Iridectomy (Sinclair’s pattern) | Product Specification | 2018, Feb |
| MHD 5 | 29 | IS 5722 : 1970 | Hook, Eye, Iris (Tyrrell’s Pattern) | Product Specification | 2018, Feb |
| MHD 5 | 30 | IS 6420 : 1989 | Eye Surgery Instruments – Retractor, Eye Lachrymal Sac, Muller’s Pattern (Modified) | Product Specification | 2013 |
| MHD 5 | 31 | IS 6472 : 1971 | General Requirements for Tinted Ophthalmic Glass | Product Specification | 2013 |
| MHD 5 | 32 | IS 6473 : 1972 | Trial Spectacle Lens Sets | Product Specification | 2018, Feb |
| MHD 5 | 33 | IS 7006 : 1973 | Visual Acuity Test Charts | Product Specification | 2017, Mar |
| MHD 5 | 34 | IS 7734 : 1975 | Forceps, Eye, Peripheral Iridectomy, Traquair’s Pattern | Product Specification | 2018, Feb |
| MHD 5 | 35 | IS 7758 : 1975 | Curette, Eye, Evacuation, Moorfield’s Pattern | Product Specification | 2018, Feb |
| MHD 5 | 36 | IS 7762 : 1975 | Hook, Eyelid | Product Specification | 2018, Feb |
| MHD 5 | 37 | IS 7767 : 1975 | Spatula, Eye, Cyclodialysis, Sinclair’s Pattern | Product Specification | 2018, Feb |
| MHD 5 | 38 | IS 7786 : 1975 | Retractor, Eyelid, Desmarre’s Pattern | Product Specification | 2018, Feb |
| MHD 5 | 39 | IS 8106 : 1976 | Needle Holder, Eye, Kalt’s Pattern | Product Specification | 2013 |
| MHD 5 | 40 | IS 8109 : 1976 | Needle Holder, Eye, Castroviejo’s Pattern | Product Specification | 2013 |
| MHD 5 | 41 | IS 8181 : 1976 | Repositor, Iris | Product Specification | 2013 |
| MHD 5 | 42 | IS 8257 : 1976 | Ophthalmoscope | Product Specification | 2018, Feb |
| MHD 5 | 43 | IS 8260 : Part 1 : 1976 | Glossary of terms relating to ophthalmic lenses and spectacle frames Part 1 Ophthalmic lenses | Terminology | 2013 |
| MHD 5 | 44 | IS 8771 : 1985 | Needle Holder, Eye, Scissors and Forceps Combined, Castroviejo’s Pattern (Modified) | Product Specification | 2017, Mar |
| MHD 5 | 45 | IS 8772 : 1985 | Needle Holder, Eye, Barraquer’s Pattern (Modified) | Product Specification | 2017, Mar |
| MHD 5 | 46 | IS 8773 : 1985 | Dissector, Lacrimal Sac, Lang’s Pattern (Modified) | Product Specification | 2017, Mar |
| MHD 5 | 47 | IS 8810 : 1985 | Rougine for Lacrimal SAC, Rollet’s Pattern (Modified) | Product Specification | 2017, Mar |
| MHD 5 | 48 | IS 9061 : 1989 | Eye Surgery Instruments – Dilators, Punctum, Wilder’s Pattern (Modified) | Product Specification | 2013 |
| MHD 5 | 49 | IS 9062 : 1987 | Probes, Lacrimal, Bowman’s Pattern (Modified) | Product Specification | 2018, Feb |
| MHD 5 | 50 | IS 9134 : 1987 | Trephine, Corneal, Castroviejo’s Pattern (Modified) | Product Specification | 2018, Feb |
| MHD 5 | 51 | IS 9329 : 1987 | Speculum, Eye, Clark’s Pattern (Modified) | Product Specification | 2018, Feb |
| MHD 5 | 52 | IS 9378 : 1987 | Speculam, Eye, Castroviejo’s Pattern (Modified) | Product Specification | 2018, Feb |
| MHD 5 | 53 | IS 9626 : 1990 | Eye Surgery Instruments – Calipers Castroviejo’s Pattern (Modified) | Product Specification | 2015, Oct |
| MHD 5 | 54 | IS 9688 : 1992 | Eye Surgery Instruments – Hooks, Strabismus | Product Specification | 2018, Feb |
| MHD 5 | 55 | IS 9983 : 1981 | Wire Vectis and Lens Expressor, Eye | Product Specification | 2018, Feb |
| MHD 5 | 56 | IS 9984 : 1981 | Cannula, Air injection, Eye | Product Specification | 2018, Feb |
| MHD 5 | 57 | IS/ISO 10342 : 2010 | Ophthalmic Instruments — Eye Refractometers | Product Specification | 2014, Oct |
| MHD 5 | 58 | IS/ISO 10938 : 1998 | Ophthalmic Instruments Chart Projectors | Product Specification | 2014, Oct |
| MHD 5 | 59 | IS/ISO 10939 : 2007 | Ophthalmic Instruments Slit-Lamp Microscopes | Product Specification | 2014, Oct |
| MHD 5 | 60 | IS/ISO 10940 : 2009 | Ophthalmic Instruments Fundus Cameras | Product Specification | 2014, Oct |
| MHD 5 | 61 | IS/ISO 10942 : 2006 | Ophthalmic Instruments Direct Ophthalmoscopes | Product Specification | 2014, Oct |
| MHD 5 | 62 | IS/ISO 10943 : 2011 | Ophthalmic Instruments — Indirect Ophthalmoscopes | Product Specification | 0 |
| MHD 5 | 63 | IS/ISO 11979 : Part 1 : 2006 | Ophthalmic Implants – Intraocular Lenses Part 1 Vocabulary | Terminology | 2017, May |
| MHD 5 | 64 | IS/ISO 11979 : Part 10 : 2006 | Ophthalmic Implants – Intraocular Lenses Part 10 Phakic Intraocular Lenses | Others | 2017, May |
| MHD 5 | 65 | IS/ISO 11979 : Part 2 : 1999 | Ophthalmic Implants – Intraocular Lenses Part 2 Optical Properties and Test Methods | Methods of tests | 2017, May |
| MHD 5 | 66 | IS/ISO 11979 : Part 3 : 2006 | Ophthalmic Implants – Intraocular Lenses Part 3 Mechanical Properties and Test Methods | Methods of tests | 2017, May |
| MHD 5 | 67 | IS/ISO 11979 : PART 4 : 2008 | Ophthalmic Implants – Intraocular Lenses Part 4 Labelling Information | Others | 2016, Jun |
| MHD 5 | 68 | IS/ISO 11979 : Part 5 : 2006 | Ophthalmic Implants – Intraocular Lenses Part 5 Biocompatibility | Others | 2017, May |
| MHD 5 | 69 | IS/ISO 11979 : PART 6 : 2014 | Ophthalmic Implants — Intraocular Lenses Part 6 Shelf-Life and Transport Stability | Methods of tests | 0 |
| MHD 5 | 70 | IS/ISO 11979 : PART 7 : 2006 | Ophthalmic Implants — Intraocular Lenses Part 7 Clinical Investigations | Methods of tests | 2016, Dec |
| MHD 5 | 71 | IS/ISO 11979 : PART 8 : 2006 | Ophthalmic Implants – Intraocular Lenses Part 8 Fundamental Requirements | Others | 2016, Jun |
| MHD 5 | 72 | IS/ISO 11979 : Part 9 : 2006 | Ophthalmic Implants – Intraocular Lenses Part 5 Biocompatibility | Others | 2017, May |
| MHD 5 | 73 | IS/ISO 12865 : 2006 | Ophthalmic Instruments Retinoscopes | Product Specification | 2014, Oct |
| MHD 5 | 74 | IS/ISO 12866 : 1999 | Ophthalmic Instruments Perimeters | Product Specification | 2014, Oct |
| MHD 5 | 75 | IS/ISO 16671 : 2015 | Ophthalmic Implants — Irrigating Solutions for Ophthalmic Surgery | Product Specification | 0 |
| MHD 5 | 76 | IS/ISO 16672 : 2015 | Ophthalmic Implants — Ocular Endotamponades | 0 | |
| MHD 5 | 77 | IS/ISO 18369 : Part 2 : 2006 | Ophthalmic Optics – Contact Lenses Part 2 Tolerances | Dimensions | 2017 |
| MHD 5 | 78 | IS/ISO 18369 : Part 3 : 2006 | Ophthalmic Optics – Contact Lenses Part 3 Measurement Methods | Methods of tests | 2017, May |
| MHD 5 | 79 | IS/ISO 18369 :Part 4 : 2006 | Ophthalmic Optics – Contact Lenses Part 4 Physicochemical Properties of Contact Lens Materials | Methods of tests | 2017, May |
| MHD 5 | 80 | IS/ISO 18369 :Part1 : 2006 | Ophthalmic Optics – Contact Lenses Part 1 Vocabulary, Classification System and Recommendations for Labelling Specifications | Terminology | 2017, May |
| MHD 5 | 81 | IS/ISO 7998 : 2005 | Ophthalmic optics – Spectacle frames – Lists of equivalent terms and vocabulary | Terminology | 2016, Aug |
| MHD 5 | 82 | IS/ISO 8596 : 2009 | Ophthalmic Optics — Visual Acuity Testing — Standard Optotype and its Presentation | Others | 2014, Oct |
| MHD 5 | 83 | IS/ISO 8598 : 1996 | Optics and Optical Instruments Focimeters | Product Specification | 2014, Dec |
| MHD 5 | 84 | IS/ISO 8598 : Part 1 : 2014 | Optics and Optical Instruments — Focimeters Part 1 General Purpose Instruments | Product Specification | 0 |
| MHD 5 | 85 | IS/ISO 8612 : 2009 | Ophthalmic Instruments Tonometers | Product Specification | 2014, Oct |
| MHD 5 | 86 | IS/ISO 8624 : 2011 | Ophthalmic Optics — Spectacle Frames — Measuring System and Terminology | 0 | |
| MHD 5 | 87 | IS/ISO 8980 : Part 1 : 2004 | Ophthalmic Optics – Uncut Finished Spectacle Lenses Part 1 Specifications for Single-Vision and Multifocal Lenses | Product Specification | 2017 |
| MHD 5 | 88 | IS/ISO 8980 : Part 3 : 2013 | Ophthalmic Optics — Uncut Finished Spectacle Lenses Part 3 Transmittance Specifications and Test Methods | Product Specification | 0 |
| MHD 5 | 89 | IS/ISO 8980 : Part 4 : 2006 | Ophthalmic Optics — Uncut Finished Spectacle Lenses Part 4 Specifications and Test Methods for Anti-Reflective Coatings | Product Specification | 0 |
| MHD 5 | 90 | IS/ISO 8980 : Part 5 : 2005 | Ophthalmic Optics — Uncut Finished Spectacle Lenses Part 5 Minimum Requirements for Spectacle Lens Surfaces Claimed to be Abrasion-Resistant | Product Specification | 0 |
| MHD 5 | 91 | IS/ISO 9801 : 2009 | Ophthalmic Instruments Trial Case Lenses | Product Specification | 2014, Oct |
| MHD 6 | 1 | IS 10540 : 1991 | Cardiovascular Surgery Instruments – Clamps, Atrial Appendage, Glover’s Pattern – Shape and Dimensions | Product Specification | 2016, Mar |
| MHD 6 | 2 | IS 10541 : 1991 | Cardiovascular Surgery Instruments – Clamps, Vena Cava, Satinsky Pattern – Shape, Sizes and Dimensions | Product Specification | 2016, Mar |
| MHD 6 | 3 | IS 11566 : 1986 | Valve Retractors | Product Specification | 2017, Mar |
| MHD 6 | 4 | IS 13940 : 1994 | Cardiovascular Surgery Instruments – Clamps, Bulldog, DeBakey, Ring Handle – Shape and Dimensions | Product Specification | 2015 |
| MHD 6 | 5 | IS 6395 : 1989 | Thoracic Surgery Instruments – Clamps, Auricle, Crafoord’s Pattern | Product Specification | 2015 |
| MHD 6 | 6 | IS 6436 : 1989 | Thoracic Surgery Instruments – Rib Spreader, Finochietto’s Pattern, Adult Size | Product Specification | 2015 |
| MHD 6 | 7 | IS 6442 : 1989 | Thoracic Surgery Instruments – Shears, Rib, Tudor Edward’s Pattern, for Posterior End of Ribs | Product Specification | 2015 |
| MHD 6 | 8 | IS 6466 : 1989 | Thoracic and Cardiovascular Surgery Instruments – Needle Holders | Product Specification | 2015 |
| MHD 6 | 9 | IS 6467 : 1989 | Thoracic Surgery Instruments – Periosteotome, Rib, Alexander’s Pattern | Product Specification | 2015 |
| MHD 6 | 10 | IS 6468 : 1989 | Thoracic Surgery Instruments – Trocar, Empyema, Nelson’s Pattern | Product Specification | 2015 |
| MHD 6 | 11 | IS 6777 : 1989 | Thoracic and Cardiovascular Surgery Instruments – Forceps, Dissecting, Lung | Product Specification | 2015 |
| MHD 6 | 12 | IS 6778 : 1989 | Thoracic Surgery Instruments – Forceps, Lung, Duval’s Pattern | Product Specification | 2015 |
| MHD 6 | 13 | IS 6779 : 1989 | Thoracic Surgery Instruments – Forceps, Dissecting and Ligature, Mixter’s Pattern | Product Specification | 2015 |
| MHD 6 | 14 | IS 6780 : 1989 | Thoracic Surgery Instruments – Forceps, Artery, Robert’s Pattern, Curved on Flat | Product Specification | 2015 |
| MHD 6 | 15 | IS 7345 : 1994 | Cardiovascular Surgery Instruments – Anastomosis Forceps and Clamps – Patterns, Shapes and Dimensions | Product Specification | 2015 |
| MHD 6 | 16 | IS 7346 : 1987 | Raspatories, Rib, Semb’s Pattern | Product Specification | 2015 |
| MHD 6 | 17 | IS 7355 : 1987 | Spreader, Rib, Tuffier’s Pattern, Adult Size | Product Specification | 2015 |
| MHD 6 | 18 | IS 7367 : 1987 | Clamps, Coarctation, Potts’ Pattern, Straight and Angular | Product Specification | 2015 |
| MHD 6 | 19 | IS 7379 : 1987 | Clamps, Patent Ductus, Potts’ Pattern, Straight and Angular | Product Specification | 2015 |
| MHD 6 | 20 | IS 7382 : 1987 | Shears, Rib, Price Thomas’ Pattern | Product Specification | 2015 |
| MHD 6 | 21 | IS 7399 : 1987 | Knife, Sternum, Lebsche’s Pattern | Product Specification | 2015 |
| MHD 6 | 22 | IS 7434 : 1987 | Retractor, Scapula, Tudor Edward’s Pattern | Product Specification | 2015 |
| MHD 6 | 23 | IS 7971 : 1987 | Tourniquet, Cardiovascular Rumel-Belmont’s Pattern | Product Specification | 2015 |
| MHD 6 | 24 | IS 7972 : 1987 | Scissors, Dissecting, Metzenbaum’s Pattern | Product Specification | 2015 |
| MHD 6 | 25 | IS 8317 : 1991 | Cardiovascular Surgery Instruments – Clamps, Vascular, Angled at 45 – Shape and Dimensions | Product Specification | 2016, Mar |
| MHD 6 | 26 | IS 8335 : 1991 | Cardiovascular Surgery Instruments – Clamps, Auricle, Satinsky Pattern – Sizes, Shape and Dimensions | Product Specification | 2016, Mar |
| MHD 6 | 27 | IS 8345 : 1994 | Cardiovascular surgery instruments – Clamps, bulldog, cross action type | Product Specification | 2015 |
| MHD 6 | 28 | IS 8409 : 1991 | Cardiovascular Surgery Instruments – Dilator, Valve, Tubb’s Mitral Pattern | Product Specification | 2016, Mar |
| MHD 6 | 29 | IS 8549 : 1991 | Cardiovascular Surgery Instruments – Angled Scissors, Potts Smith Pattern | Product Specification | 2017, Mar |
| MHD 6 | 30 | IS 8890 : 1991 | Thoracic Surgery Instruments – Clamps, Bronchus – Types, Shapes and Dimensions | Product Specification | 2016, Mar |
| MHD 6 | 31 | IS 9928 : 1981 | Clamp, Aortic, DeBakey’s Pattern (Spoon Shaped angled Jaw) | Product Specification | 2015 |
| MHD 6 | 32 | IS 9950 : 1981 | Clamp, Vascular, Wister Pattern | Product Specification | 2015 |
| MHD 6 | 33 | IS 9951 : 1981 | Scissors, Blunt End, Nelson Pattern | Product Specification | 2015 |
| MHD 6 | 34 | IS 9987 : 1981 | Clamps, Multipurpose, De-bakey’s Pattern | Product Specification | 2015 |
| MHD 6 | 35 | IS/ISO 11658 : 2012 | Cardiovascular Implants and Extracorporeal Organs — Blood/Tissue Contact Surface Modifications for Extracorporeal Perfusion Systems | 0 | |
| MHD 6 | 36 | IS/ISO 13958 : 2014 | Concentrates for Haemodialysis and Related Therapies | Product Specification | 0 |
| MHD 6 | 37 | IS/ISO 13959 : 2014 | Water for Haemodialysis and Related Therapies | 0 | |
| MHD 6 | 38 | IS/ISO 13960 : 2010 | Cardiovascular Implants and Extracorporeal Systems – Plasmafilters ( First Revision ) | Product Specification | 0 |
| MHD 6 | 39 | IS/ISO 15674 : 2016 | Cardiovascular Implants and Artificial Organs — Hard-Shell Cardiotomy/Venous Reservoir Systems (With/Without Filter) and Soft Venous Reservoir Bags ( Second Revision ) | Product Specification | 0 |
| MHD 6 | 40 | IS/ISO 15676 : 2005 | Cardiovascular Implants and Artificial Organs – Requirements for Single- Use Tubing Packs for Cardiopulmonary Bypass and Extracorporeal Membrane Oxygenation (ECMO) | Product Specification | 0 |
| MHD 6 | 41 | IS/ISO 23500 : 2014 | Guidance for the Preparation and Quality Management of Fluids for Haemodialysis and Related Therapies | 0 | |
| MHD 6 | 42 | IS/ISO 25539 : Part 1 : 2017 | Cardiovascular Implants — Endovascular Devices Part 1 Endovascular Prostheses ( First Revision ) | Product Specification | 0 |
| MHD 6 | 43 | IS/ISO 25539 : Part 2 : 2012 | Cardiovascular Implants – Endovascular Devices Part 2 Vascular Stents | Product Specification | 0 |
| MHD 6 | 44 | IS/ISO 25539 : Part 3 : 2011 | Cardiovascular Implants — Endovascular Devices Part 3 Vena Cava Filters | 0 | |
| MHD 6 | 45 | IS/ISO 5840 : 2005 | Cardiovascular Implants – Cardiac Valve Prostheses | Product Specification | 2016, Dec |
| MHD 6 | 46 | IS/ISO 7199 : 2016 | Cardiovascular Implants and Artificial Organs — Blood-Gas Exchangers ( Oxygenators ) ( Second Revision ) | Product Specification | 0 |
| MHD 6 | 47 | IS/ISO 8637 : 2004 : 2010 | Cardiovascular Implants and Extracorporeal Systems – Haemodialysers, Haemodiafilters, Haemofilters and Haemoconcentrators ( First Revision ) | Product Specification | 0 |
| MHD 6 | 48 | IS/ISO 8638 : 2010 | Cardiovascular Implants and Extracorporeal Systems – Extracorporeal Blood Circuit for Haemodialysers, Haemodiafilters and Haemofilters ( First Revision ) | Product Specification | 0 |
| MHD 7 | 1 | IS 10157 : 1982 | Percussor, Neurological, McGill’s Pattern | Product Specification | 2016, Jan |
| MHD 7 | 2 | IS 10172 : 1982 | Burs and Perforators for Drill Brace | Product Specification | 2016, Jan |
| MHD 7 | 3 | IS 10174 : 1982 | Tongs, skull Traction, Crutchfield’s Pattern | Product Specification | 2016, Jan |
| MHD 7 | 4 | IS 10183 : 1982 | Retractor, Deep, Self-Retaining, Laminectomy | Product Specification | 2016, Jan |
| MHD 7 | 5 | IS 10676 : 1983 | Spatula, Brain, Double-ended Malleable, Olivecrona’s Pattern | Product Specification | 2016, Jan |
| MHD 7 | 6 | IS 10677 : 1983 | Rongeur, Intervertebral Disk | Product Specification | 2016, Jan |
| MHD 7 | 7 | IS 10765 : 1983 | Forceps, Dissecting, Toothed and Bayonet Shaped, Cushing’s Pattern | Product Specification | 2016, Jan |
| MHD 7 | 8 | IS 13141 : 1991 | Neurosurgical Instruments-Leksell’s Rongeur | Product Specification | 2017, Mar |
| MHD 7 | 9 | IS 13175 : 1991 | Neurosurgical Instruments – Needle Holder – Shape and Dimensions | Product Specification | 2017, Nov |
| MHD 7 | 10 | IS 13180 : 1991 | Neurosurgical Instruments – Scoville Trephine | Product Specification | 2017, Nov |
| MHD 7 | 11 | IS 14139 : 2008 | Neurosurgical Implants – Self-closing Intracranial Aneurysm Clips | Product Specification | 2018, Jan |
| MHD 7 | 12 | IS 14679 : 1999 | Neurosurgical implants – Implantable perpheral nerve stimulators | Product Specification | 2016, Jan |
| MHD 7 | 13 | IS 8174 : 1994 | Neurosurgical instruments – Forceps, artery, Dandy’s pattern – Shape and dimensions | Product Specification | 2015 |
| MHD 7 | 14 | IS 8175 : 1994 | Neurosurgical Instruments – Forceps, Artery, Straight and Curved on Flat, Hugh Cairn’s Pattern – Shape and Dimensions | Product Specification | 2015 |
| MHD 7 | 15 | IS 8176 : 1976 | Dissectors, Penfield’s Pattern | Product Specification | 2017, Nov |
| MHD 7 | 16 | IS 8334 : 1977 | Rongeur, Cranial, Dahlgren’s Pattern | Product Specification | 2017, Nov |
| MHD 7 | 17 | IS 8380 : 1977 | Rongeur, Double-Action, Olivecrona’s Pattern | Product Specification | 2017, Nov |
| MHD 7 | 18 | IS 8695 : 1978 | Forceps, Dressing, Bayonet Shape, Cushing’s Pattern | Product Specification | 2017, Nov |
| MHD 7 | 19 | IS 8696 : 1978 | Guide, Saw, De Martel’s Pattern | Product Specification | 2017, Nov |
| MHD 7 | 20 | IS 8799 : 1978 | Rongeur, Kerrison | Product Specification | 2017, Nov |
| MHD 7 | 21 | IS 9041 : 1979 | Elevator, Periosteal | Product Specification | 2017, Nov |
| MHD 7 | 22 | IS 9072 : 1979 | Rongeur, Pituitary | Product Specification | 2017, Nov |
| MHD 7 | 23 | IS 9073 : 1979 | Neuro-Suction Tubes | Product Specification | 2017, Nov |
| MHD 7 | 24 | IS 9074 : 1979 | Raney Clips and Clip Applicator | Product Specification | 2017, Nov |
| MHD 7 | 25 | IS 9408 : 1986 | Retractor, Self Retaining | Product Specification | 2017, Nov |
| MHD 7 | 26 | IS 9410 : Part 1 : 1980 | Silver Clip Set – Part I : Forceps, Clip Cutting and Forming | Product Specification | 2017, Nov |
| MHD 7 | 27 | IS 9410 : Part 2 : 1980 | Silver Clip Set – Part II : Forceps, Clip Applying | Product Specification | 2017, Nov |
| MHD 7 | 28 | IS 9410 : Part 3 : 1981 | Silver Clip Set – Part III : Rack, Clip | Product Specification | 2017, Nov |
| MHD 7 | 29 | IS 9903 : 1981 | Brace, Skull | Product Specification | 2017, Nov |
| MHD 7 | 30 | IS 9904 : 1981 | Hooks, Dural | Product Specification | 2017, Nov |
| MHD 7 | 31 | IS 9911 : 1981 | Cannula, Brain | Product Specification | 2017, Nov |
| MHD 7 | 32 | IS 9914 : 1981 | Calipers, Ice Tong, Cone’s Pattern | Product Specification | 2017, Nov |
| MHD 7 | 33 | IS 9933 : 1981 | Retractor, Brain, Malleable | Product Specification | 2017, Nov |
| MHD 7 | 34 | IS/ISO 13175 : Part 3 : 2012 | Implants for Surgery — Calcium Phosphates Part 3 Hydroxyapatite and Beta-tricalcium Phosphate Bone Substitutes | Product Specification | 0 |
| MHD 7 | 35 | IS/ISO 13779 : Part 3 : 2018 | Implants for Surgery — Hydroxyapatite Part 3 Chemical Analysis and Characterization of Crystallinity and Phase Purity | Methods of tests | 0 |
| MHD 7 | 36 | IS/ISO 13779 : Part 4 : 2018 | Implants for Surgery — Hydroxyapatite Part 4 Determination of Coating Adhesion Strength | Methods of tests | 0 |
| MHD 7 | 37 | IS/ISO 13779 : Part 6 : 2015 | Implants for Surgery — Hydroxyapatite Part 6 Powders | Product Specification | 0 |
| MHD 7 | 38 | IS/ISO 14708 : Part 1 : 2014 | Implants for Surgery — Active Implantable Medical Devices Part 1 General Requirements for Safety, Marking and for Information to be Provided by the Manufacturer ( First Revision ) | Safety Standard | 0 |
| MHD 7 | 39 | IS/ISO 14708 : Part 3 : 2017 | Implants for Surgery — Active Implantable Medical Devices Part 3 Implantable Neurostimulators ( First Revision ) | Product Specification | 0 |
| MHD 7 | 40 | IS/ISO 14708 : Part 7 : 2013 | Implants for Surgery — Active Implantable Medical Devices Part 7 Particular Requirements for Cochlear Implant Systems | Product Specification | 0 |
| MHD 7 | 41 | IS/ISO 15309 : 2013 | Implants for Surgery — Differential Scanning Calorimetry of Poly Ether Ether ketone ( PEEK ) Polymers and Compounds for use in Implantable Medical Devices | Methods of tests | 0 |
| MHD 7 | 42 | IS/ISO 16402 : 2008 | Implants for Surgery — Acrylic Resin Cement — Flexural Fatigue Testing of Acrylic Resin Cements Used in Orthopaedics | Methods of tests | 0 |
| MHD 7 | 43 | IS/ISO 7197 : 2006 | Neurosurgical Implants-Sterile,Single-Use Hydrocephalus Shunts and Components | Product Specification | 2015 |
| MHD 7 | 44 | IS/ISO/IEEE 11073 : Part 20101 : 2004 | Health Informatics — Point-of-Care Medical Device Communication Part 20101 Application Profiles — Base Standard | Others | 0 |
| MHD 8 | 1 | IS 10011 : 2019 | Dentistry — Polymer-based Restorative Materials ( First Revision ) | Product Specification | 0 |
| MHD 8 | 2 | IS 10012 : 1981 | Dental Zinc Oxide/Eugenol Filling Materials | Product Specification | 2018, Feb |
| MHD 8 | 3 | IS 10088 : 1981 | Retractor, Dental | Product Specification | 2018, Feb |
| MHD 8 | 4 | IS 10309 : 1982 | Key, Torquing, Edgewise | Product Specification | 2016, Jan |
| MHD 8 | 5 | IS 10353 : 1982 | Pliers, McKellops’ Type, Dental | Product Specification | 2016, Jan |
| MHD 8 | 6 | IS 10354 : 1982 | Torch, Alcohol, Dental | Product Specification | 2016, Jan |
| MHD 8 | 7 | IS 10663 : 2003 | Dental Rotary Instruments – Steel and Carbide Burs | Product Specification | 2017, Mar |
| MHD 8 | 8 | IS 10664 : 2003 | Dental Rotary Instruments – Steel and Carbide Finishing Burs | Product Specification | 2017, Mar |
| MHD 8 | 9 | IS 10798 : 2019 | Dentistry — Information System on the Location of Dental Equipment in the Working Area of the Oral Health Care Provider ( First Revision ) | Terminology | 0 |
| MHD 8 | 10 | IS 10828 : 1984 | Pliers, Band Contouring, Dental Johnson’s Pattern | Product Specification | 2017, Mar |
| MHD 8 | 11 | IS 10836 : Part 1 : 1984 | Pliers, Loop Bending, Dental, Tweed’s Pattern – Part 1 : Fixed Beak, Type 1 | Product Specification | 2017, Mar |
| MHD 8 | 12 | IS 10866 : 1984 | Abrasives Dental | Product Specification | 2017, Mar |
| MHD 8 | 13 | IS 11044 : 1984 | Acrylic Trimmers, Dental | Product Specification | 2017, Mar |
| MHD 8 | 14 | IS 11045 : 1984 | Metal Trimmers, Dental | Product Specification | 2017, Mar |
| MHD 8 | 15 | IS 11317 : 1985 | Shears, Laboratory, Straight, Dental | Product Specification | 2017, Mar |
| MHD 8 | 16 | IS 11394 : 1985 | Pliers, Distal End Cutting, with Safety Hold, Dental | Product Specification | 2017, Mar |
| MHD 8 | 17 | IS 11628 : 1986 | Agar Impression Material | Product Specification | 2017, Mar |
| MHD 8 | 18 | IS 11929 : 1986 | Adopters, Band, Dental | Product Specification | 2017, Mar |
| MHD 8 | 19 | IS 12181 : 2018 | Dental Materials — Determination of Colour Stability ( First Revision ) | Methods of tests | 0 |
| MHD 8 | 20 | IS 12374 : 1987 | Dimensions for swivel type coupling to dental handpieces | Product Specification | 2018, Feb |
| MHD 8 | 21 | IS 12507 : 1988 | General Requirements for Dental Pliers | Product Specification | 2016, Jan |
| MHD 8 | 22 | IS 12601 : 1989 | Dental Instruments – Pliers, Lip-safe, Flat Nose | Product Specification | 2016, Jan |
| MHD 8 | 23 | IS 12602 : 1989 | Dental Instruments – Nippers, Cutting, Carbide Tip | Product Specification | 2016, Jan |
| MHD 8 | 24 | IS 12624 : 2018 | Dentistry — Root-Canal Obturating Points ( Second Revision ) | Product Specification | 0 |
| MHD 8 | 25 | IS 12721 : Part 1 : 2005 | Dental Base Metal Casting Alloys – Part 1 : Cobalt-Based Alloys | Product Specification | 2015 |
| MHD 8 | 26 | IS 12721 : Part 2 : 2005 | Dental Base Metal Casting Alloys : Part 2 Nickel – Based Alloys | Product Specification | 2015 |
| MHD 8 | 27 | IS 12764 : 2019 | Dentistry — Hose Connectors for Air Driven Dental Handpieces ( Second Revision ) | Product Specification | 0 |
| MHD 8 | 28 | IS 12797 : 1989 | Dental Materials – Dental Glass Polyalkenoate Cements | Product Specification | 2016, Jan |
| MHD 8 | 29 | IS 12855 : 1989 | Dental Materials – Root Canal Sealing Materials | Product Specification | 2016, Jan |
| MHD 8 | 30 | IS 13701 : 2018 | Dentistry — Test Methods for Rotary Instruments ( First Revision ) | Methods of tests | 0 |
| MHD 8 | 31 | IS 13710 : 1993 | Dental materials – Dental zinc polycarboxylate cements | Product Specification | 2016, Jan |
| MHD 8 | 32 | IS 3875 : 1983 | Hot Plate, Wax Levelling, Dental | Product Specification | 2017, Mar |
| MHD 8 | 33 | IS 3876 : 1985 | Knife, Plaster, Dental | Product Specification | 2017, Mar |
| MHD 8 | 34 | IS 3877 : 1967 | Wax Knife, Dental | Product Specification | 2018, Feb |
| MHD 8 | 35 | IS 3878 : 1967 | Shears, Plaster, Dental | Product Specification | 2018, Feb |
| MHD 8 | 36 | IS 3879 : 1967 | Spatula, Wax, Dental, No. 1 | Product Specification | 2018, Feb |
| MHD 8 | 37 | IS 3887 : 1978 | General requirements for cutting type dental instruments | Product Specification | 2018, Feb |
| MHD 8 | 38 | IS 3888 : 1987 | Spatula, Stainless Steel, Dental | Product Specification | 2018, Feb |
| MHD 8 | 39 | IS 3889 : 1985 | Chisels, Dental | Product Specification | 2017, Mar |
| MHD 8 | 40 | IS 3890 : Part 1 : 1986 | Instruments, Plastic Filling, Dental – Part 1 : Designation Numbers 1, 3, 4, 5 and 6 | Product Specification | 2017, Mar |
| MHD 8 | 41 | IS 3890 : Part 2 : 1967 | Instruments, Plastic Filling, Dental – Part II : Designation Numbers 12, 20, 21, 46, 47, 153 and 183 | Product Specification | 2018, Feb |
| MHD 8 | 42 | IS 4316 : 1991 | Orthodontic pliers, snipe nose – Shape,dimensions and tests | Methods of tests | 2017, Mar |
| MHD 8 | 43 | IS 4319 : Part 2 : 1986 | Pliers, Stretching and Contouring, Dental – Part 2 Pliers, contouring | Product Specification | 2017, Mar |
| MHD 8 | 44 | IS 4679 : 1968 | Spatula, Plaster, Dental, Curved and Straight | Product Specification | 2018, Feb |
| MHD 8 | 45 | IS 4680 : 1968 | Spatula, Wax, Dental, No. 2 | Product Specification | 2018, Feb |
| MHD 8 | 46 | IS 4714 : 1985 | Scalers, Dental, no. SC 1/2, 3/4 and 5/6 | Product Specification | 2017, Mar |
| MHD 8 | 47 | IS 4715 : 1968 | Excavators, Dental, No. EX 1/2, 3/4, 5/6, 7/8, 9/10, 11/12 and 13/14 | Product Specification | 2018, Feb |
| MHD 8 | 48 | IS 4975 : 1986 | Elevators, Dental, No. 1, 2 and 3 | Product Specification | 2017, Mar |
| MHD 8 | 49 | IS 4976 : 1987 | Forceps Extraction, Dental, Upper Anteriors, No. 1 and 2 | Product Specification | 2018, Feb |
| MHD 8 | 50 | IS 4977 : 1968 | Forceps, Extraction, Dental, Lower Molar, Hawk’s Bill, No. 1 | Product Specification | 2018, Feb |
| MHD 8 | 51 | IS 5004 : 1968 | Spoons, Cutting Dental, No. 1/2, 3/4 and 5/6 | Product Specification | 2018, Feb |
| MHD 8 | 52 | IS 5005 : 1968 | Burnisher, Dental, No. Brn 1/2 | Product Specification | 2018, Feb |
| MHD 8 | 53 | IS 5017 : 1968 | Carvers, Dental, No. Car 1/2, 3/4 and 5/6 | Product Specification | 2018, Feb |
| MHD 8 | 54 | IS 5023 : 2003 | Dental Units | Product Specification | 2017, Mar |
| MHD 8 | 55 | IS 5178 : 1969 | Gingival Margin Trimmers, Dental, No. GMT 1/2, 3/4, 5/6 and 7/8 | Product Specification | 2018, Feb |
| MHD 8 | 56 | IS 5179 : 1986 | Pluggers, Root Canal, Dental, No. PLG 1, 2 and 3 | Product Specification | 2017, Mar |
| MHD 8 | 57 | IS 5180 : 1969 | Needles, Hypodermic, Dental | Product Specification | 2018, Feb |
| MHD 8 | 58 | IS 5181 : 1969 | Press, Flask, Dental | Product Specification | 2018, Feb |
| MHD 8 | 59 | IS 5185 : 1969 | Articulators, Dental | Product Specification | 2018, Feb |
| MHD 8 | 60 | IS 5211 : 1969 | Scissors, Dental No. 1, Straight and Curved on Flat | Product Specification | 2018, Feb |
| MHD 8 | 61 | IS 5212 : 1969 | Scissors, Crown, Dental, Straight and Curved on Flat | Product Specification | 2018, Feb |
| MHD 8 | 62 | IS 5217 : 1969 | Clamp, Flask, Dental | Product Specification | 2018, Feb |
| MHD 8 | 63 | IS 5227 : 1969 | Flask, Dental | Product Specification | 2018, Feb |
| MHD 8 | 64 | IS 5541 : 1970 | Spatula, Plastics, Clear and Colorless, Dental | Product Specification | 2018, Feb |
| MHD 8 | 65 | IS 5576 : 1985 | Carriers, Amalgam, Dental, No. 1 and 2 | Product Specification | 2017, Mar |
| MHD 8 | 66 | IS 5582 : 1986 | Mandrels, Dental, No, 1, 2 and 3 | Product Specification | 2017, Mar |
| MHD 8 | 67 | IS 5584 : 1970 | Syringe, Hypodermic, Cartridge, Dental, Pivot Breech Cap Type | Product Specification | 2018, Feb |
| MHD 8 | 68 | IS 5763 : 1970 | Occlusal Plane Guide, Dental | Product Specification | 2018, Feb |
| MHD 8 | 69 | IS 5794 : 1986 | Pliers, Pin-roughening and Bending, Dental | Product Specification | 2017, Mar |
| MHD 8 | 70 | IS 5795 : 1991 | Orthodontic pliers, Crown and ligating, Howe’s pattern – Shape, dimensions and tests | Product Specification | 2017, Mar |
| MHD 8 | 71 | IS 5879 : 1970 | Punch, Rubber Dam, Dental | Product Specification | 2018, Feb |
| MHD 8 | 72 | IS 5941 : 1970 | Dental Engine, Electric | Product Specification | 2017, Dec |
| MHD 8 | 73 | IS 5965 : 1970 | Frame, Rubber Dam, Dental | Product Specification | 2018, Feb |
| MHD 8 | 74 | IS 6020 : 2003 | Dental Hand Instruments – Reusable Mirrors and Handles | Product Specification | 2017, Mar |
| MHD 8 | 75 | IS 6035 : 1986 | Zinc Phosphate Dental Cement | Product Specification | 2017, Mar |
| MHD 8 | 76 | IS 6036 : 1987 | Alginate Dental Impression Materials | Product Specification | 2018, Feb |
| MHD 8 | 77 | IS 6037 : 1970 | Zinc Oxide-eugenol Dental Impression Paste | Product Specification | 2018, Feb |
| MHD 8 | 78 | IS 6038 : 1979 | Dental Impression (Modelling) Compound | Product Specification | 2018, Feb |
| MHD 8 | 79 | IS 6039 : 1970 | Zinc Oxide-eugenol Dental Cement | Product Specification | 2017, Mar |
| MHD 8 | 80 | IS 6043 : 1970 | Copper Phosphate – Zinc Phosphate Dental Cement | Product Specification | 2018, Feb |
| MHD 8 | 81 | IS 6116 : 1992 | Dental Equipment – Dental Patient Chair | Product Specification | 2018, Feb |
| MHD 8 | 82 | IS 6292 : 1986 | Cotton Wool Holder, Dental | Product Specification | 2017, Mar |
| MHD 8 | 83 | IS 6402 : 1986 | Forceps, Rubber Dam Clamp and Cotton Roll Clamp, Dental | Product Specification | 2017, Mar |
| MHD 8 | 84 | IS 6404 : 1971 | Tweezers, Dental, No. 1, 2 and 3 | Product Specification | 2018, Feb |
| MHD 8 | 85 | IS 6462 : 1972 | Fitting Dimensions for Dental Burs and Cutters | Dimensions | 2016, Jan |
| MHD 8 | 86 | IS 6525 : 1972 | Syringe, Hypodermic, Dental for Interchangeable Needles | Product Specification | 2018, Feb |
| MHD 8 | 87 | IS 6555 : 1972 | Dental Laboratory Plaster | Product Specification | 2018, Feb |
| MHD 8 | 88 | IS 6811 : 1972 | Syringe, Water, Self-filling, Dental | Product Specification | 2018, Feb |
| MHD 8 | 89 | IS 6814 : 1972 | Syringe, Air and Water, Dental | Product Specification | 2018, Feb |
| MHD 8 | 90 | IS 6815 : 1972 | Retainers, Matrix, Dental, No. 1 and 2 | Product Specification | 2018, Feb |
| MHD 8 | 91 | IS 6822 : 1972 | Cutter, Distal Arch Wire, Dental | Product Specification | 2018, Feb |
| MHD 8 | 92 | IS 6823 : 1972 | Forceps, Extraction, Dental, Lower Molars | Product Specification | 2018, Feb |
| MHD 8 | 93 | IS 6824 : 1972 | Forceps, Extraction, Dental, Lower Wisdom Tooth | Product Specification | 2018, Feb |
| MHD 8 | 94 | IS 6825 : 1972 | Forceps, Extraction, Dental, Upper Cuspids and Bicuspids | Product Specification | 2018, Feb |
| MHD 8 | 95 | IS 6826 : 1972 | Forceps, extraction, dental, lower incisors, cuspids and bicuspids, left | Product Specification | 2018, Feb |
| MHD 8 | 96 | IS 6827 : 1972 | Forceps, Extraction, Dental, Upper Molars, Left | Product Specification | 2018, Feb |
| MHD 8 | 97 | IS 6828 : 1972 | Forceps, Extraction, Dental, Upper Molars, Right | Product Specification | 2018, Feb |
| MHD 8 | 98 | IS 6829 : 1991 | Dental Instruments – Orthodontic Pliers, Angle Wire Bending – Shape, Dimensions and Tests | Product Specification | 2017, Mar |
| MHD 8 | 99 | IS 6846 : 1972 | General requirements for control unit for airturbine, dental | Others | 2017, Mar |
| MHD 8 | 100 | IS 6856 : 1972 | Forceps, Extraction, Dental, Upper Root, Narrow Beak | Product Specification | 2018, Feb |
| MHD 8 | 101 | IS 6858 : 1972 | Forceps, Extraction, Dental, Lower Incisors, Cuspids and Bicuspids | Product Specification | 2018, Feb |
| MHD 8 | 102 | IS 6859 : 1972 | Forceps Extraction, Dental, Upper Root, Wide Beak | Product Specification | 2018, Feb |
| MHD 8 | 103 | IS 6866 : 1986 | Forceps, Extraction, Dental, Upper Wisdom Tooth | Product Specification | 2016, Jan |
| MHD 8 | 104 | IS 6867 : 1972 | Forceps, Extraction, Dental, Upper Root, Medium Beak | Product Specification | 2018, Feb |
| MHD 8 | 105 | IS 6868 : 1991 | Dental instruments – Dental extraction forceps | Product Specification | 2017, Mar |
| MHD 8 | 106 | IS 6870 : 1986 | Pliers, Loop Bending, Dental | Product Specification | 2017, Mar |
| MHD 8 | 107 | IS 6882 : Part 2 : 2018 | Dentistry — Base Polymers Part 2 Orthodontic Base Polymers ( First Revision ) | 0 | |
| MHD 8 | 108 | IS 6887 : 2005 | Dentistry – Denture Base Polymers | Product Specification | 2015 |
| MHD 8 | 109 | IS 6888 : 1986 | Dental Inlay Casting Wax | Product Specification | 2017, Mar |
| MHD 8 | 110 | IS 7066 : 1973 | Trays, Instrument-cabinet, Dental | Product Specification | 2018, Feb |
| MHD 8 | 111 | IS 7333 : 1991 | Orthodontic pliers, spring forming – Shape and dimensions | Product Specification | 2017, Mar |
| MHD 8 | 112 | IS 7334 : 1988 | Pliers, Clasp Adjusting, Dental | Product Specification | 2016, Jan |
| MHD 8 | 113 | IS 7335 : 1974 | Pliers, Closing Loop, Nance Type, Dental | Product Specification | 2018, Feb |
| MHD 8 | 114 | IS 7338 : 1991 | Orthodontic pliers, band removing, posterior – Shape and dimensions | Product Specification | 2017, Mar |
| MHD 8 | 115 | IS 7340 : 1974 | Pliers, Pin And Ligature Cutting, Dental | Product Specification | 2018, Feb |
| MHD 8 | 116 | IS 7348 : Part 1 : 2003 | Dental vocabulary:Part 1-General and clinical terms | Terminology | 2018, Oct |
| MHD 8 | 117 | IS 7348 : Part 2 : 2003 | Dental Vocabulary : Part 2 – Dental Materials | Terminology | 2017, Mar |
| MHD 8 | 118 | IS 7348 : Part 3 : 2003 | Dental Vocabulary – Part 3 : Dental Instruments | Terminology | 2018, Feb |
| MHD 8 | 119 | IS 7348 : Part 4 : 1994 | Dental vocabulary Part 4 : Dental equipment | Terminology | 2016, Jan |
| MHD 8 | 120 | IS 7348 : Part 5 : 1994 | Dental vocabulary Part 5 Terms associated with testing | Terminology | 2016, Jan |
| MHD 8 | 121 | IS 7425 : 1974 | Dental Casting Investment for Gold Alloys | Product Specification | 2018, Feb |
| MHD 8 | 122 | IS 7467 : 1974 | Bands, Matrix, Dental, No. 1 and 2 | Product Specification | 2018, Feb |
| MHD 8 | 123 | IS 7474 : 1986 | Pliers, Collar, Dental | Product Specification | 2017, Mar |
| MHD 8 | 124 | IS 7476 : 1974 | Nippers, Cutting, Dental | Product Specification | 2018, Feb |
| MHD 8 | 125 | IS 7627 : 1975 | Gag, Mouth, Mason’s Pattern | Product Specification | 2018, Jan |
| MHD 8 | 126 | IS 7676 : 1975 | Chisel, Osseous, Dental | Product Specification | 2018, Feb |
| MHD 8 | 127 | IS 7677 : 1986 | Exolevers, Apical, Dental | Product Specification | 2017, Mar |
| MHD 8 | 128 | IS 7780 : 1975 | Pliers, Ligature Forming, Dental | Product Specification | 2018, Feb |
| MHD 8 | 129 | IS 7781 : 1975 | Pliers, Angle Ribbon Arch with Groove, Dental | Product Specification | 2018, Feb |
| MHD 8 | 130 | IS 7833 : 1975 | Knives, Gingivectomy, Dental | Product Specification | 2017, Mar |
| MHD 8 | 131 | IS 7853 : 1975 | Surveyor, Cast, Dental | Product Specification | 2017, Mar |
| MHD 8 | 132 | IS 7966 : 1976 | Dental Modelling Wax | Product Specification | 2017, Mar |
| MHD 8 | 133 | IS 8019 : 1976 | Dental Artificial Stone | Product Specification | 2017, Mar |
| MHD 8 | 134 | IS 8020 : 1976 | Baseplate, Dental | Product Specification | 2017, Mar |
| MHD 8 | 135 | IS 8021 : 1975 | Dental Sticky Wax | Product Specification | 2018, Feb |
| MHD 8 | 136 | IS 8022 : 1976 | Acrylic Resin Teeth | Product Specification | 2017, Mar |
| MHD 8 | 137 | IS 8044 : 1976 | Forceps, extraction, dental, lower molar, children | Product Specification | 2017, Mar |
| MHD 8 | 138 | IS 8045 : 1976 | Forceps, Extraction, Dental, Lower Incisors and Canines, Children | Product Specification | 2017, Mar |
| MHD 8 | 139 | IS 8046 : 1976 | Forceps, Extraction, Dental, Upper Incisors and Canines, Children | Product Specification | 2017, Mar |
| MHD 8 | 140 | IS 8047 : 1976 | Forceps, Extraction, Dental, Upper Molar, Children | Product Specification | 2017, Mar |
| MHD 8 | 141 | IS 8207 : 1976 | Forceps, Rongeur, Dental | Product Specification | 2017, Mar |
| MHD 8 | 142 | IS 8283 : 1976 | Tweezers, Soldering | Product Specification | 2017, Mar |
| MHD 8 | 143 | IS 8284 : 1976 | Pusher, Band, Dental, Mershon’s Pattern | Product Specification | 2017, Mar |
| MHD 8 | 144 | IS 8287 : 1986 | Pliers, Band Stretching and Contouring, Parrot Beak, Dental | Product Specification | 2017, Mar |
| MHD 8 | 145 | IS 8346 : 2018 | Dentistry — Operator’s Stool ( Second Revision ) | Product Specification | 0 |
| MHD 8 | 146 | IS 8527 : 1977 | Tweezers, Extraction, Dental | Product Specification | 2018, Feb |
| MHD 8 | 147 | IS 8528 : 1988 | Pliers, Anterior Band Forming, Double Beak, Dental | Product Specification | 2016, Jan |
| MHD 8 | 148 | IS 8529 : 1989 | Dental Instruments – Pliers, Posterior Band Forming, Double Beak | Product Specification | 2016, Jan |
| MHD 8 | 149 | IS 8571 : 1977 | Dental Porcelain | Product Specification | 2017, Mar |
| MHD 8 | 150 | IS 8815 : 2019 | Dentistry — Designation System for Teeth and Areas of the Oral Cavity ( Second Revision ) | Code of Practice | 0 |
| MHD 8 | 151 | IS 8850 : 1978 | Guide For The Use Of Dental Materials | Code of Practice | 2017, Mar |
| MHD 8 | 152 | IS 8864 : 1978 | Autopolymerizing (acrylic) resins for dental use | Product Specification | 2017, Mar |
| MHD 8 | 153 | IS 8948 : 1989 | Dental Instruments – Pliers, Ligature Tying | Product Specification | 2016, Jan |
| MHD 8 | 154 | IS 8949 : 1989 | Dental Instruments – Pliers, Curved, Howe’s Pattern | Product Specification | 2016, Jan |
| MHD 8 | 155 | IS 9003 : 1978 | Acrylizer (curing unit) | Product Specification | 2017, Mar |
| MHD 8 | 156 | IS 9699 : 1981 | Chisel, Dental, Large | Product Specification | 2018, Feb |
| MHD 8 | 157 | IS 9717 : 1980 | Trays, Impression, Dental | Product Specification | 2018, Feb |
| MHD 8 | 158 | IS 9774 : 1981 | Pliers, Bracket Opening, Dental | Product Specification | 2018, Feb |
| MHD 8 | 159 | IS 9932 : 1981 | Recommendations for Lighting of Dental Operatories | Code of Practice | 2018, Feb |
| MHD 8 | 160 | IS 9940 : 1981 | Trimmers, Electrically Operated, for Dental Models | Product Specification | 2016, Jan |
| MHD 8 | 161 | IS/ISO 1563 : 1990 | Dental Alginate Impression Material | Product Specification | 2016, Dec |
| MHD 8 | 162 | IS/ISO 15798 : 2013 | Ophthalmic Implants — Ophthalmic Viscosurgical Devices | 0 | |
| MHD 8 | 163 | IS/ISO 1797 : 2017 | Dentistry — Shanks for Rotary and Oscillating Instruments | Product Specification | 0 |
| MHD 8 | 164 | IS/ISO 21563 : 2013 | Dentistry — Hydrocolloid Impression Materials | 0 | |
| MHD 8 | 165 | IS/ISO 2157 : 2016 | Dentistry — Nominal Diameters and Designation Code Numbers for Rotary Instruments ( First Revision ) | Code of Practice | 0 |
| MHD 8 | 166 | IS/ISO 22674 : 2016 | Dentistry — Metallic Materials for Fixed and Removable Restorations and Appliances | Product Specification | 0 |
| MHD 8 | 167 | IS/ISO 24234 : 2015 | Dentistry — Dental Amalgam | Product Specification | 0 |
| MHD 8 | 168 | IS/ISO 6360 : Part 2 : 2004 | Dentistry – Number Coding System For Roatry Instruments Part 2 Shapes | Others | 0 |
| MHD 8 | 169 | IS/ISO 6873 : 2013 | Dentistry — Gypsum Products ( First Revision ) | Product Specification | 0 |
| MHD 8 | 170 | IS/ISO 6876 : 2012 | Dentistry — Root Canal Sealing Materials ( First Revision ) | Product Specification | 0 |
| MHD 8 | 171 | IS/ISO 6887 : Part 1 : 2018 | Dentistry — Base Polymers Part 1 Denture Base Polymers ( First Revision ) | 0 | |
| MHD 8 | 172 | IS/ISO 7492 : 1997 | Dental explorers | Product Specification | 2018, Jun |
| MHD 8 | 173 | IS/ISO 9917 : PART 1 : 2003 | Dentistry – Water-based cement : Part 1 Powder/liquid acid-base cements | Product Specification | 2018, Jun |
| MHD 8 | 174 | IS/ISO 9917 : PART 2 : 2017 | Dentistry — Water-Based Cement Part 2 Resin-Modified Cements ( First Revision ) | Product Specification | 0 |
| MHD 9 | 1 | IS 10110 : 1982 | Table Spoon Terminal Device for Artificial Limbs | Product Specification | 2018, Nov |
| MHD 9 | 2 | IS 10111 : 1982 | Table Fork Terminal Device for Artificial Limbs | Product Specification | 2018, Nov |
| MHD 9 | 3 | IS 10537 : 1983 | Ankle Bolt for Sach Foot | Product Specification | 2017, Jan |
| MHD 9 | 4 | IS 10538 : 1983 | Kitchen Knife Terminal Device for Artificial Limbs | Product Specification | 2017, Jan |
| MHD 9 | 5 | IS 10539 : 1983 | Sickle Terminal Device for Artificial Limbs | Product Specification | 2017, Jan |
| MHD 9 | 6 | IS 10926 : 1984 | Tweezer Terminal Device for Artificial Limbs | Product Specification | 2017, Jan |
| MHD 9 | 7 | IS 10928 : 1984 | Table, Tilting, Manual | Product Specification | 2017, Jan |
| MHD 9 | 8 | IS 10929 : 1984 | Hook Voluntary Opening Terminal Device for Artificial Limbs | Product Specification | 2017, Jan |
| MHD 9 | 9 | IS 10976 : 1993 | Wheelchairs – Nomenclature, Terms And Definitions | Terminology | 2018, Nov |
| MHD 9 | 10 | IS 11242 : 1985 | Lumbo-sacral Flexion-extension and Lateral-flexion Control Brace | Product Specification | 2016, Jan |
| MHD 9 | 11 | IS 11243 : 1985 | Thoraco-lumbo-sacral Flexion-extension and Lateral-flexion Control Brace | Product Specification | 2016, Jan |
| MHD 9 | 12 | IS 11279 : 1985 | Braille Slate | Product Specification | 2016, Jan |
| MHD 9 | 13 | IS 11316 : 1985 | Cosmetic Hand, Artificial Limb | Product Specification | 2016, Jan |
| MHD 9 | 14 | IS 11646 : Part 1 : 2003 | Cane for Visually Handicapped – Part 1 : Rigid, Long and White | Product Specification | 2018, Nov |
| MHD 9 | 15 | IS 11646 : Part 2 : 1986 | Cane for Visually Handicapped – Part 2 : Folding Type | Product Specification | 2017, Jan |
| MHD 9 | 16 | IS 11647 : 1986 | Braille Paper | Product Specification | 2017, Jan |
| MHD 9 | 17 | IS 11708 : 1986 | Hand, Mechanical | Product Specification | 2017, Jan |
| MHD 9 | 18 | IS 12104 : 1987 | Abacus for Visually Handicapped | Product Specification | 2017, Jan |
| MHD 9 | 19 | IS 12152 : 1987 | Pocket Frame, Braille Writing | Product Specification | 2017, Nov |
| MHD 9 | 20 | IS 12184 : 1987 | Stylus for Braille Writing | Product Specification | 2017, Jan |
| MHD 9 | 21 | IS 12439 : 1988 | Signature Guide for Visually Impaired | Product Specification | 2018, Nov |
| MHD 9 | 22 | IS 12664 : Part 1 : 2003 | Artificial Limbs – Sach Foot for Lower Extremity Prostheses – Part 1 : Design and Dimensions | Product Specification | 2019, Jul |
| MHD 9 | 23 | IS 12683 : Part 1 : 1989 | Measuring Devices for Visually Impaired Persons – Part 1 : Scale, General Purposes | Product Specification | 2019, Jul |
| MHD 9 | 24 | IS 12683 : Part 2 : 1989 | Artificial Limbs – Measuring Devices for Visually Impaired Persons – Part 2 : Tape | Product Specification | 2014 |
| MHD 9 | 25 | IS 12683 : Part 3 : 2000 | Measuring Devices for Visually Impaired Persons – Part 3 : Goniometer | Product Specification | 2019, Aug |
| MHD 9 | 26 | IS 13017 : 1991 | Rehabilitation Equipment – Walker Rollator | Product Specification | 2017, Jan |
| MHD 9 | 27 | IS 13822 : 1993 | Braille Duplicating Sheet | Product Specification | 2018, Nov |
| MHD 9 | 28 | IS 13837 : 1993 | Braille Duplicating Machine | Product Specification | 2018, Nov |
| MHD 9 | 29 | IS 13970 : Part 1 : 1995 | Prosthetics and Orthotics – Vocabulary: Part 1 General terms for external limb prostheses and external orthoses | Terminology | 2016, Jan |
| MHD 9 | 30 | IS 13970 : Part 2 : 1994 | Prosthetics and Orthotics – Vocabulary: Part 2 Terms relating to external limb prostheses and wearers of these prostheses | Terminology | 2019, Jul |
| MHD 9 | 31 | IS 13970 : Part 3 : 1994 | Prosthetics and Orthotics – Vocabulary: Part 3 Terms relating to external orthoses | Terminology | 2019, Aug |
| MHD 9 | 32 | IS 14429 : 1997 | Braille Shorthand Machine, | Product Specification | 2017, Jan |
| MHD 9 | 33 | IS 14723 : 1999 | Artificial Limbs – Knee Shin Assembly | Product Specification | 2016, Jan |
| MHD 9 | 34 | IS 14879 : 2000 | Anterior Spinal Hyperextension (ASH) Brace | Product Specification | 2016, Jan |
| MHD 9 | 35 | IS 15376 : Part 1 : 2003 | Ostomy Collection Bags – Part 1 : Vocabulary | Terminology | 2018, Nov |
| MHD 9 | 36 | IS 15376 : Part 2 : 2003 | Ostomy Collection Bags – Part 2 : Requirements and Test Methods | Methods of tests | 2018, Nov |
| MHD 9 | 37 | IS 17034 : 2018 | Specification for Jaipur Foot | Product Specification | 0 |
| MHD 9 | 38 | IS 17063 : 2018 | Specification for Rehabilitation Equipment ― Rough Terrain Active Wheelchairs, Folding, Rider-I, Adult and Child Size | Product Specification | 0 |
| MHD 9 | 39 | IS 17154 : 2019 | Battery Operated Motorized Tricycle — Specification | Product Specification | 0 |
| MHD 9 | 40 | IS 17155 : 2019 | Tricycle, Single Hand Propelled ( Right / Left ) ( Junior Size ) ― Specification | Product Specification | 0 |
| MHD 9 | 41 | IS 17157 : 2019 | Multi Utility Tricycle ― Specification | 0 | |
| MHD 9 | 42 | IS 17194 : 2019 | Surgical Ankle Boot with Broad Toe ( Child and Adult Size ) — Specification | Product Specification | 0 |
| MHD 9 | 43 | IS 4534 : 1980 | Adapter for Terminal Devices, Artificial Limbs | Product Specification | 2017, Jan |
| MHD 9 | 44 | IS 4535 : 1968 | Saw-grip Terminal Device for Artificial Limbs | Product Specification | 2017, Nov |
| MHD 9 | 45 | IS 4554 : 1968 | Terminal Devices, Ball Pein and Claw, for Artificial Limbs | Product Specification | 2016, Jan |
| MHD 9 | 46 | IS 4555 : 1980 | Biprong Terminal Device, Draughtsman, for Artificial Limbs | Product Specification | 2017, Jan |
| MHD 9 | 47 | IS 4556 : 1968 | Typing Finger Terminal Device for Artificial Limbs | Product Specification | 2017 |
| MHD 9 | 48 | IS 4567 : 1968 | Pliers Terminal Device, Quick-grip, for Artificial Limbs | Product Specification | 2016, Jan |
| MHD 9 | 49 | IS 4577 : 1980 | Spade-grip Terminal Device for Artificial Limbs | Product Specification | 2017, Jan |
| MHD 9 | 50 | IS 4609 : 1980 | Pencil-holding Device for Artificial Limbs | Product Specification | 2017, Jan |
| MHD 9 | 51 | IS 4675 : 1968 | Light Split-hook Device for Artificial Limbs | Product Specification | 2016, Jan |
| MHD 9 | 52 | IS 4677 : 1968 | Steering Appliance for Artificial Limbs | Product Specification | 2016, Jan |
| MHD 9 | 53 | IS 5015 : 1969 | Knife-terminal Device Artificial Limbs | Product Specification | 2017, Jan |
| MHD 9 | 54 | IS 5143 : 1988 | Adjustable Axillary Crutches | Product Specification | 2018, Nov |
| MHD 9 | 55 | IS 5144 : 1980 | Metal Forearm Crutches (Canadian Pattern) | Product Specification | 2017, Jan |
| MHD 9 | 56 | IS 5145 : 1969 | Walking Sticks | Product Specification | 2017, Jan |
| MHD 9 | 57 | IS 5150 : 1969 | Rubber Tips for Crutches and Walking Stricks | Product Specification | 2017, Jan |
| MHD 9 | 58 | IS 5586 : 1970 | Metal Component for Sectional Forearm | Product Specification | 2017, Jan |
| MHD 9 | 59 | IS 5594 : 1983 | Wrist Unit, Rotary, for Hand Prosthests | Product Specification | 2017, Jan |
| MHD 9 | 60 | IS 5603 : 1983 | Mechanical Elbow Joint | Product Specification | 2017, Jan |
| MHD 9 | 61 | IS 5607 : 1970 | Semi-automatic Elbow Joint | Product Specification | 2017, Nov |
| MHD 9 | 62 | IS 5665 : 1982 | Shoulder Wheel | Product Specification | 2017, Nov |
| MHD 9 | 63 | IS 5745 : 1986 | Heel Socket and Plate for Orthosis | Product Specification | 2017, Jan |
| MHD 9 | 64 | IS 5796 : 1970 | Disc Type Weight Set for Physio-Therapy Exercisers Other than Pulley Arrangements | Product Specification | 2017, Jan |
| MHD 9 | 65 | IS 5809 : 1986 | Ankle Joint for Orthosis | Product Specification | 2017, Jan |
| MHD 9 | 66 | IS 5810 : 1986 | Knee Joint with Lock for Orthosis | Product Specification | 2017, Jan |
| MHD 9 | 67 | IS 5827 : 1982 | Paraffin Wax Bath | Product Specification | 2018, Nov |
| MHD 9 | 68 | IS 5956 : 1986 | Hip Joint With Lock For Orthosis | Product Specification | 2017, Jan |
| MHD 9 | 69 | IS 5963 : 1971 | Knee Joint without Lock for Steel Orthopaedic Calipers | Product Specification | 2017, Nov |
| MHD 9 | 70 | IS 5964 : 1971 | Round Spur for Orthopaedic Calipers | Product Specification | 2017, Nov |
| MHD 9 | 71 | IS 6069 : 1971 | Sliding Seat Exerciser | Product Specification | 2017, Nov |
| MHD 9 | 72 | IS 6099 : 1991 | Rehabilitation equipment – Invalid walkers with crutches | Product Specification | 2016, Jan |
| MHD 9 | 73 | IS 6205 : 1982 | Stationary Cycle Exerciser for Adults | Product Specification | 2018, Nov |
| MHD 9 | 74 | IS 6221 : 1971 | Pelvic Band for Steel Orthopedic Calipers and Braces | Product Specification | 2017, Nov |
| MHD 9 | 75 | IS 6222 : 1971 | Thigh Band for Orthopedic Calipers and Braces | Product Specification | 2017, Nov |
| MHD 9 | 76 | IS 6223 : 1971 | Calf Band for Orthopedic Calipers and Braces | Product Specification | 2017, Nov |
| MHD 9 | 77 | IS 6224 : 1980 | Tuber Band for Orthopaedic Calipers and Braces | Product Specification | 2017, Nov |
| MHD 9 | 78 | IS 6275 : 1971 | Lower Extremity Full Length Brace with Joints with Locks | Product Specification | 2017, Nov |
| MHD 9 | 79 | IS 6302 : 1971 | Whirlpool Bath | Product Specification | 2017, Jan |
| MHD 9 | 80 | IS 6414 : 1972 | Parallel Walking Bars, Adult and Child Sizes, for the Handicapped | Product Specification | 2017, Jan |
| MHD 9 | 81 | IS 6571 : 1991 | Rehabilitation equipment – Wheelchairs, non-folding, adult size, institutional model | Product Specification | 2017, Jan |
| MHD 9 | 82 | IS 6624 : 1972 | Basic Hand Splint, Palmar Arch Support | Product Specification | 2017, Jan |
| MHD 9 | 83 | IS 6625 : 1972 | Basic Hand Splint Component | Product Specification | 2017, Jan |
| MHD 9 | 84 | IS 6626 : 1972 | Basic Hand Splint, Forearm Piece | Product Specification | 2017, Jan |
| MHD 9 | 85 | IS 6781 : 1972 | Staple Ankle Joint | Product Specification | 2017, Jan |
| MHD 9 | 86 | IS 6802 : 1986 | Prosthetic Hip Joint | Product Specification | 2017, Jan |
| MHD 9 | 87 | IS 6809 : 1990 | Rehabilitation equipment – Fixed-height walking frame | Product Specification | 2016, Jan |
| MHD 9 | 88 | IS 6810 : 1990 | Rehabilitation equipment – Metal tripod and tetrapod sticks | Product Specification | 2016, Jan |
| MHD 9 | 89 | IS 6812 : 2003 | Knee Joint, Uniaxial for Below Knee Prosthesis | Product Specification | 2018, Nov |
| MHD 9 | 90 | IS 6979 : 1973 | Cerebral Palsy Chair, Tubular, Institutional Model | Product Specification | 2017, Jan |
| MHD 9 | 91 | IS 6992 : 1982 | Cerebral Palsy Chair, Domestic Model | Product Specification | 2018, Nov |
| MHD 9 | 92 | IS 6993 : 1973 | Pan Knee Joint | Product Specification | 2016, Jan |
| MHD 9 | 93 | IS 6995 : 1973 | Cruciform Below-Knee Joint | Product Specification | 2018, Nov |
| MHD 9 | 94 | IS 7373 : 2003 | Hip Disarticulation Joint Unit for Lower Limb Prosthetic Fitments | Product Specification | 2018, Nov |
| MHD 9 | 95 | IS 7419 : 1983 | Requirements for Stairs for physical Rehabilitation | Product Specification | 2016, Jan |
| MHD 9 | 96 | IS 7454 : 1991 | Rehabilitation equipment – Wheelchairs, folding, adult size | Product Specification | 2017, Jan |
| MHD 9 | 97 | IS 7924 : 1976 | Thigh Blocks, Wooden | Product Specification | 2017, Nov |
| MHD 9 | 98 | IS 8086 : 1991 | Rehabilitation equipment – Wheelchairs, folding, junior size | Product Specification | 2017, Jan |
| MHD 9 | 99 | IS 8088 : 2019 | Tricycle, Hand Propelled ? Specification ( First Revision ) | Product Specification | 0 |
| MHD 9 | 100 | IS 8492 : 1985 | Ankle Blocks, Wooden | Product Specification | 2017, Nov |
| MHD 9 | 101 | IS 8511 : 1985 | Valves for Suction Socket for Artificial Limbs | Product Specification | 2016, Jan |
| MHD 9 | 102 | IS 8798 : 1978 | Wheel, Multipurpose | Product Specification | 2017, Nov |
| MHD 9 | 103 | IS 9471 : Part 1 : 1980 | Modular Lower Limb Orthotic Components – Part I : Stirrups | Product Specification | 2017, Nov |
| MHD 9 | 104 | IS 9471 : Part 2 : 1980 | Modular Lower Limb Orthotic Components – Part II : Stirrups, Split | Product Specification | 2017, Nov |
| MHD 9 | 105 | IS 9471 : Part 3 : 1980 | Modular Lower Limb Orthotic Components – Part III : Stirrup Plates | Product Specification | 2017, Nov |
| MHD 9 | 106 | IS 9471 : Part 4 : 1980 | Modular Lower Limb Orthotic Components – Part IV : Joint Unit, Ankle | Product Specification | 2017, Nov |
| MHD 9 | 107 | IS 9471 : Part 5 : 1980 | Modular Lower Limb Orthotic Components – Part V : Joint Unit, Knee | Product Specification | 2017, Nov |
| MHD 9 | 108 | IS 9471 : Part 5 : Sec 2 : 2019 | Specification for Modular Lower Limb Orthotic Components Part 5 Joint Unit Section 2 Standard knee | Product Specification | 0 |
| MHD 9 | 109 | IS 9471 : Part 6 : 2000 | Modular Lower Limb Orthotic Components – Part 6 : Orthotic Hip Joint (Joint Unit, Hip Drop Lock) | Product Specification | 2017, Nov |
| MHD 9 | 110 | IS 9471 : Part 7 : 2000 | Modular Lower Limb Orthotic Components – Part 7 : Orthotic Joint Bars, Ankle and Knee (Upper and Lower) | Product Specification | 2016, Jan |
| MHD 9 | 111 | IS 9797 : 1981 | Cycle, Fret-saw | Product Specification | 2017, Nov |
| MHD 9 | 112 | IS/ISO 16021 : 2000 | Urine-Absorbing Aids — Basic Principles for Evaluation of Single-Use Adult-Incontinence- Absorbing Aids from the Perspective of Users and Caregivers | Code of Practice | 0 |
| MHD 9 | 113 | IS/ISO 22523 : 2006 | External Limb Prostheses and External Orthoses — Requirements and Test Methods | Product Specification | 0 |
| MHD 9 | 114 | IS/ISO 22675 : 2016 | Prosthetics — Testing of Ankle-foot Devices and Foot Units — Requirements and Test Methods | Product Specification | 0 |
| MHD 9 | 115 | IS/ISO 7176 : Part 26 : 2007 | Wheelchairs Part 26 Vocabulary | Terminology | 0 |
| MHD 10 | 1 | IS 10269 : 1982 | Haemocytometer Counting Chambers Clinical and Diagnostic Apparatus | Product Specification | 2018, Mar |
| MHD 10 | 2 | IS 10615 : 1983 | Needle Holder, Bozemann’s Pattern | Product Specification | 2017, Mar |
| MHD 10 | 3 | IS 10867 : 2018 | Single-Use Containers for Human Venous Blood Specimen Collection ( First Revision ) | Product Specification | 0 |
| MHD 10 | 4 | IS 10916 : 1984 | Evacuated Tubes for Blood Specimen Collection (Vacutainers) | Product Specification | 2017, Mar |
| MHD 10 | 5 | IS 11383 : 1985 | Thin Walled Glass Capillary Pipettes | Product Specification | 2017, Mar |
| MHD 10 | 6 | IS 12622 : 1989 | Medical Thermometers for Hypothermia, Subnormal Range | Product Specification | 2016, Feb |
| MHD 10 | 7 | IS 14284 : 1995 | Laboratory glassware pipette pastuer, disposable | Product Specification | 2016, Feb |
| MHD 10 | 8 | IS 16004 : 2013 | Hypodermic Needles for Singal Use – Colour Coding for Indentification | Code of Practice | 2018, Feb |
| MHD 10 | 9 | IS 3055 : Part 1 : 1994 | Clinical thermometers Part 1: solid stem type | Product Specification | 2016, Feb |
| MHD 10 | 10 | IS 3055 : Part 2 : 2004 | Clinical thermometers-Part 2: Enclosed scale type-Specification | Product Specification | 2014 |
| MHD 10 | 11 | IS 3740 : 1966 | Tubes, Glass, for Pathological Work | Product Specification | 2017, Mar |
| MHD 10 | 12 | IS 3741 : Part 1 : 1990 | Medical Instruments – Sedimentation Tubes – Part 1 : Westergren Tube | Product Specification | 2016, Feb |
| MHD 10 | 13 | IS 3741 : Part 2 : 1990 | Medical Glass Instruments – Sedimentation Tubes – Part 2 : Wintrobe Tube | Product Specification | 2016, Feb |
| MHD 10 | 14 | IS 3742 : 1990 | Medical Glass Instruments – Pipettes, dilution for haemocytometers | Product Specification | 2016, Feb |
| MHD 10 | 15 | IS 4067 : 1967 | Tube, Swab (West Type), for Throat | Product Specification | 2017, Mar |
| MHD 10 | 16 | IS 4069 : 1967 | Urinometer | Product Specification | 2017, Mar |
| MHD 10 | 17 | IS 4087 : 1980 | Pipette for Haemoglobinometers and Blood Pipette for Biochemical Work | Product Specification | 2017, Mar |
| MHD 10 | 18 | IS 4364 : 1967 | Pipettes, Serological | Product Specification | 2017, Mar |
| MHD 10 | 19 | IS 4381 : 1967 | Pathological Microscope | Product Specification | 2017, Mar |
| MHD 10 | 20 | IS 4444 : 1967 | Bottles, Bacteriological | Product Specification | 2017, Mar |
| MHD 10 | 21 | IS 4529 : 1968 | Glass Tubes for Medical Thermometers | Product Specification | 2018, Jan |
| MHD 10 | 22 | IS 4708 : 1968 | Urine Glass, Conical | Product Specification | 2017, Mar |
| MHD 10 | 23 | IS 4754 : 1968 | Staining Troughs And Jar | Product Specification | 2017, Mar |
| MHD 10 | 24 | IS 5155 : 1969 | Pipettes, Ostwald-Folin Type | Product Specification | 2017, Mar |
| MHD 10 | 25 | IS 6606 : 1972 | Albuminometer (Esbach’s) with Stopper, Stand and Case | Product Specification | 2017, Mar |
| MHD 10 | 26 | IS 6942 : 1973 | Flask, Roux, Bacteriological, With or Without Offset Neck (1 000 ml Nominal Capacity | Product Specification | 2017, Mar |
| MHD 10 | 27 | IS 6943 : 1990 | Medical Glass Instruments – Cover, glass used with haemocytometers | Product Specification | 2017, Feb |
| MHD 10 | 28 | IS 6944 : 1973 | Bottle, Bijou, Bacteriological | Product Specification | 2017, Mar |
| MHD 10 | 29 | IS 7039 : 1973 | Tube, Culture, Screw Cap | Product Specification | 2017, Mar |
| MHD 10 | 30 | IS 7183 : 1973 | Flask, Culture, Haffkine | Product Specification | 2017, Mar |
| MHD 10 | 31 | IS 8501 : 1977 | Anaerobic Jar | Product Specification | 2017, Mar |
| MHD 10 | 32 | IS 9430 : 1980 | Tube, Haemometer | Product Specification | 2017, Mar |
| MHD 11 | 1 | IS 11378 : 2002 | Anaesthetic Machines for Use with Humans | Product Specification | 2017, Mar |
| MHD 11 | 2 | IS 12417 : 1988 | Suction Apparatus, Pedal Operated | Product Specification | 2014 |
| MHD 11 | 3 | IS 13200 : 2015 | Anaesthetic and Respiratory Equipment – Vocabulary ( First Revision ) | Terminology | 0 |
| MHD 11 | 4 | IS 3390 : 1988 | Sphygmomanometers, Mercurial | Product Specification | 2018, Mar |
| MHD 11 | 5 | IS 3391 : 1965 | Stethoscopes | Product Specification | 2018, Jan |
| MHD 11 | 6 | IS 3392 : 1965 | Anaesthetic Airways | Product Specification | 2018, Mar |
| MHD 11 | 7 | IS 3393 : 1965 | Mouth Props and Airways (London Hospital Pattern) | Product Specification | 2018, Mar |
| MHD 11 | 8 | IS 4113 : Part 1 : 2003 | Laryngoscopes – Part 1 : Conventional Hook-on Type Handle-Blade Fittings | Product Specification | 2014 |
| MHD 11 | 9 | IS 4113 : Part 2 : 2003 | Laryngoscopic Fittings – Part 2 : Miniature Electric Lamps – Screw Threads and Sockets for Conventional Blades | Product Specification | 2014 |
| MHD 11 | 10 | IS 4154 : 1967 | Endotracheal Connections | Product Specification | 2018, Mar |
| MHD 11 | 11 | IS 4533 : 1995 | Suction Apparatus | Product Specification | 2016, Feb |
| MHD 11 | 12 | IS 5622 : 1970 | Soda-Lime Canisters for Use with Gas Anaesthetic Apparatus ( Waters’ to-and-Fro) | Product Specification | 2011, Feb |
| MHD 11 | 13 | IS 5680 : 1969 | Rubber Tubing for Medical Use | Product Specification | 2015 |
| MHD 11 | 14 | IS 6190 : 1971 | Anaesthetic Face Masks | Product Specification | 2014 |
| MHD 11 | 15 | IS 6194 : 1971 | Intermittent Positive Pressure Respirator, Bag Type, Manually Operated | Product Specification | 2016, Feb |
| MHD 11 | 16 | IS 6207 : 1971 | Trolleys for Oxygen Cylinders | Product Specification | 2018, Mar |
| MHD 11 | 17 | IS 6581 : 1972 | Endotracheal Tubes (Rubber) | Product Specification | 2018, Mar |
| MHD 11 | 18 | IS 6807 : 1972 | Reinforced (Flexo-metallic) Magill’s Endotracheal Tube | Product Specification | 2018, Mar |
| MHD 11 | 19 | IS 7176 : 1985 | Anaesthetic Apparatus, Drawover Portable Type | Product Specification | 2016, Dec |
| MHD 11 | 20 | IS 7409 : Part 2 : 1994 | Anaesthetic and respiratory equipment – Conical connectors Part 2: Screw threaded weight bearing connectors | Product Specification | 2016, Feb |
| MHD 11 | 21 | IS 7625 : 1975 | Gag, Mouth, Doyen’s Pattern | Product Specification | 2018, Mar |
| MHD 11 | 22 | IS 7652 : 1988 | Sphygmomanometer, Aneroid Type | Product Specification | 2016, Feb |
| MHD 11 | 23 | IS 7885 : 1985 | Spray, Macintosh’s Pattern | Product Specification | 2018, Mar |
| MHD 11 | 24 | IS 8254 : Part 1 : 1976 | Valve, Non-Rebreathing – Part I : Ruben’s Pattern | Product Specification | 2018, Mar |
| MHD 11 | 25 | IS 8254 : Part 2 : 1976 | Value, Non-rebreathing – Part II : Ambu-hesse’s Pattern | Product Specification | 2018, Mar |
| MHD 11 | 26 | IS 8312 : 1977 | Forceps, Introducing, Endotracheal Tube, Magill’s Pattern | Product Specification | 2014 |
| MHD 11 | 27 | IS 8432 : 1977 | Tubes, Tracheotomy (rubber or plastics) | Product Specification | 2014 |
| MHD 11 | 28 | IS 9462 : 1980 | Humidifier, Nebulizing, Ventury Type | Product Specification | 2018, Mar |
| MHD 11 | 29 | IS/IEC 80601 : Part 2 : Sec 30 : 2018 | Medical Electrical Equipment Part 2-30 Particular Requirements for Basic Safety and Essential Performance of Automated Non-Invasive Sphygmomanometers | Product Specification | 0 |
| MHD 11 | 30 | IS/ISO 10079 Part 2 : 2014 | Medical Suction Equipment Part 2 Manually Powered Suction Equipment (First Revision) | Product Specification | 0 |
| MHD 11 | 31 | IS/ISO 10079 : Part 3 : 2014 | Medical Suction Equipment Part 3 Suction Equipment Powered from a Vacuum or Positive Pressure Gas Source ( First Revision ) | Product Specification | 0 |
| MHD 11 | 32 | IS/ISO 10524 Part 1 : 2006 | Pressure Regulators For Use with Medical Gases Part 1 Pressure Regulators and Pressure Regulators with Flow-Metering Devices | Product Specification | 2018, Mar |
| MHD 11 | 33 | IS/ISO 10524 Part 2 : 2005 | Pressure Regulators for use with Medical Gases Part 2 Manifold and Line Pressure Regulators | Product Specification | 2018, Mar |
| MHD 11 | 34 | IS/ISO 10524 : Part 3 : 2005 | Pressure Regulators for Use with Medical Gases Part 3 Pressure Regulators Integrated with Cylinder Valves | Product Specification | 2018, Dec |
| MHD 11 | 35 | IS/ISO 10524 : Part 4 : 2008 | Pressure Regulators for Use with Medical Gases Part 4 Low-pressure Regulators | Product Specification | 2018, Dec |
| MHD 11 | 36 | IS/ISO 10651 : Part 3 : 1997 | Lung Ventilators for Medical Use Part 3 Particular Requirements for Emergency and Transport Ventilators | 0 | |
| MHD 11 | 37 | IS/ISO 10651 : Part 4 : 2002 | Lung Ventilators for Medical Use — Particular Requirements for Basic Safety and Essential Performance Part 4 Particular Requirements for Operator-Powered Resuscitators | 0 | |
| MHD 11 | 38 | IS/ISO 10651 : Part 5 : 2006 | Lung Ventilators for Medical Use ― Particular Requirements for Basic Safety and Essential Performance Part 5 Gas-Powered Emergency Resuscitators | 0 | |
| MHD 11 | 39 | IS/ISO 10651 : Part 6 : 2004 | Lung Ventilators for Medical Use — Particular Requirements for Basic Safety and Essential Performance Part 6 Home-Care Ventilatory Support Devices | 0 | |
| MHD 11 | 40 | IS/ISO 11197 : 2016 | Medical Supply Units | 0 | |
| MHD 11 | 41 | IS/ISO 11712 : 2009 | Anaesthetic and Respiratory Equipment Supralaryngeal Airways and Connectors | Product Specification | 2014, Nov |
| MHD 11 | 42 | IS/ISO 14408 : 2005 | Tracheal Tubes Designed for Laser Surgery – Requirements for Marking and Accompanying Information | Others | 2015, Apr |
| MHD 11 | 43 | IS/ISO 15001 : 2010 | Anaesthetic and Respiratory Equipment — Compatibility with Oxygen ( First Revision ) | Others | 0 |
| MHD 11 | 44 | IS/ISO 15002 : 2008 | Flow-Metering Devices for Connection to Terminal Units of Medical Gas Pipeline Systems | Product Specification | 2018, Mar |
| MHD 11 | 45 | IS/ISO 16628 : 2008 | Tracheobronchial Tubes — Sizing and Marking | 0 | |
| MHD 11 | 46 | IS/ISO 5356 : Part 1 : 2015 | Anaesthetic and Respiratory Equipment — Conical Connectors Part 1 Cones and Sockets ( First Revision ) | Product Specification | 0 |
| MHD 11 | 47 | IS/ISO 5356 : Part 2 : 2012 | Anaesthetic and Respiratory Equipment – Conical Connectors Part 2 Screw-Threaded Weight-Bearing Connectors | Product Specification | 0 |
| MHD 11 | 48 | IS/ISO 5361 : 1999 | Anaesthetic and Respiratory Equipment – Tracheal Tubes and Connectors | Product Specification | 2017, Mar |
| MHD 11 | 49 | IS/ISO 5362 : 2006 | Anaesthetic Reservoir Bags | Product Specification | 2017, Mar |
| MHD 11 | 50 | IS/ISO 5364 : 2008 | Anaesthetic and Respiratory Equipment Oropharyngeal Airways | Product Specification | 2014, Apr |
| MHD 11 | 51 | IS/ISO 5366 : PART 1 : 2000 | Anaesthetic and Respiratory Equipment – Tracheostomy Tubes Part 1 Tubes and Connectors for use in Adults | Product Specification | 2017, Feb |
| MHD 11 | 52 | IS/ISO 5367 : 2000 | Breathing tubes intended for use with anaesthetic apparatus and ventilators | Product Specification | 2017, Mar |
| MHD 11 | 53 | IS/ISO 7396 : Part 1 : 2007 | Medical Gas Pipelines Systems : Part 1 Pipelines Systems for Compressed Medical Gases and Vacuum | Others | 2014, Jan |
| MHD 11 | 54 | IS/ISO 7396 : Part 2 : 2007 | Medical Gas Pipeline Systems : Part 2 Anaesthetic Gas Scavenging Disposal Systems | Others | 2014, Jan |
| MHD 11 | 55 | IS/ISO 81060 : Part 1 : 2007 | Non-Invasive Sphygmomanometers Part 1 Requirements and Test Methods for Non-Automated Measurement Type | 0 | |
| MHD 11 | 56 | IS/ISO 9170 : PART 1 : 2008 | Terminal units for medical gas pipeline systems Part 1 Terminal units for use with compressed medical gases and vacuum | Product Specification | 2016, Aug |
| MHD 11 | 57 | IS/ISO 9170 : Part 2 : 2008 | Terminal Units for Medical Gas Pipeline Systems, Part 2 Terminal Units for Anaesthetic Gas Scavenging Systems | Product Specification | 2017, Mar |
| MHD 12 | 1 | IS 10150 : 1981 | Guide for sterilization of medical products | Code of Practice | 2016, Dec |
| MHD 12 | 2 | IS 10258 : 2002 | Sterile Hypodermic Syringes for Single Use | Product Specification | 2017, Jun |
| MHD 12 | 3 | IS 10258 : Part 3 : 2010 | Sterile Hypodermic Syringes For Single Use Part 3 Auto-Disable Syringes For Fixed-Dose Immunization | Product Specification | 2015, Feb |
| MHD 12 | 4 | IS 10263 : 1982 | Deep Fat Fryer, Single and Double Pan Electrically Operated, for Large Catering Establishments | Product Specification | 2016, Dec |
| MHD 12 | 5 | IS 10264 : 1982 | Trolley, Hot Food, for Hospital and Industrial Canteens | Product Specification | 2016, Dec |
| MHD 12 | 6 | IS 10603 : 1983 | Abdominal Belts | Product Specification | 2016, Feb |
| MHD 12 | 7 | IS 10654 : 2018 | Sterile Hypodermic Needles for Single Use — Requirements and Test Methods ( Fourth Revision ) | Product Specification | 0 |
| MHD 12 | 8 | IS 10783 : 1983 | Patients-Lifting Devices, Mobile, Manually Operated | Product Specification | 2016, Dec |
| MHD 12 | 9 | IS 10985 : 1984 | Needle, Acupuncture | Product Specification | 2017, Mar |
| MHD 12 | 10 | IS 11043 : 1984 | Needle, Epidural | Product Specification | 2017, Mar |
| MHD 12 | 11 | IS 1108 : 1975 | Pharmaceutical Glass Containers | Product Specification | 2017, Mar |
| MHD 12 | 12 | IS 11400 : 1985 | Hypodermic Syringes, Interchangeable Type for General Purposes | Product Specification | 2017, Mar |
| MHD 12 | 13 | IS 12050 : 1986 | Sterile Hypodermic Syringes with Needle Attached for Single use | Product Specification | 2017, Mar |
| MHD 12 | 14 | IS 12173 : 1987 | Cervical Halter | Product Specification | 2013 |
| MHD 12 | 15 | IS 12227 : 2002 | Sterile Single-Use Syringes, With or Without Needle, for Insulin | Product Specification | 2017, Jun |
| MHD 12 | 16 | IS 12430 : 1987 | Safety code for installation, maintenance and servicing of sterlizers | Code of Practice | 2013 |
| MHD 12 | 17 | IS 12655 : Part 4 : 2003 | Infusion Equipment for Medical Use – Part 4 : Infusion Sets for Single Use, Gravity Feed | Product Specification | 2013 |
| MHD 12 | 18 | IS 13115 : 1991 | Portable first aid kit for general use | Product Specification | 2016, Dec |
| MHD 12 | 19 | IS 13422 : 1992 | Disposable Surgical Rubber Gloves | Product Specification | 2013 |
| MHD 12 | 20 | IS 14193 : 1994 | Ovulation Thermometers | Product Specification | 2016, Feb |
| MHD 12 | 21 | IS 15110 : 2002 | Veterinary Thermometers, Mercury-in-Glass Type | Product Specification | 2017, Mar |
| MHD 12 | 22 | IS 15113 : 2002 | Clinical Electrical Thermometers with Maximum Device | Product Specification | 2017, Mar |
| MHD 12 | 23 | IS 15354 : Part 1 : 2018 | Single-Use Medical Examination Gloves Part 1 Specification for Gloves Made from Rubber Latex or Rubber Solution ( First Revision ) | 0 | |
| MHD 12 | 24 | IS 15354 : Part 2 : 2018 | Single-Use Medical Examination Gloves Part 2 Specification for Gloves Made from Poly ( Vinyl Chloride ) ( First Revision ) | 0 | |
| MHD 12 | 25 | IS 15537 : 2004 | Injection Equipment for medical use-Ampoules for injectables | Product Specification | 2014 |
| MHD 12 | 26 | IS 16097 : 2013 | Sterile Single Use Scalp Vein (Winged Needle) Infusion Set | Product Specification | 2018 |
| MHD 12 | 27 | IS 1984 : Part 2 : 2003 | Injection Containers for Injectables and Accessories – Part 2 : Injection Vials Made of Moulded Glass | Product Specification | 2018 |
| MHD 12 | 28 | IS 3118 : 1978 | Electric Bacteriological Incubators | Product Specification | 2016, Dec |
| MHD 12 | 29 | IS 3119 : 1978 | Hot Air Sterilizers | Product Specification | 2016, Dec |
| MHD 12 | 30 | IS 3120 : 1999 | Baby Incubators | Product Specification | 2014 |
| MHD 12 | 31 | IS 3234 : Part 1 : 1986 | Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 1: General requirements | Product Specification | 2017, Mar |
| MHD 12 | 32 | IS 3234 : Part 2 : 1995 | Conical Fittings with a 6% (LUER) Taper for Syringes, Needles and Certain Other Medical Equipment – Part 2 : Lock Fittings | Product Specification | 2016, Feb |
| MHD 12 | 33 | IS 3235 : 1988 | General Requirements for Syringes for Medical Use | Product Specification | 2016, Feb |
| MHD 12 | 34 | IS 3236 : 1992 | Hypodermic Syringes For General Purposes | Product Specification | 2018, Jan |
| MHD 12 | 35 | IS 3237 : Part 1 : 1985 | Special Purpose Syringes – Part 1 : Insulin Syringes | Product Specification | 2017, Feb |
| MHD 12 | 36 | IS 3237 : Part 2 : 1985 | Special Purpose Syringes – Part 2 : Tuberculin Syringes | Product Specification | 2017, Mar |
| MHD 12 | 37 | IS 3237 : Part 3 : 1985 | Special Purpose Syringes – Part 3 : BCG Syringes | Product Specification | 2017, Mar |
| MHD 12 | 38 | IS 3237 : Part 4 : 1986 | Special Purpose Syringes – Part 4 : Vaccine Syringe | Product Specification | 2017, Mar |
| MHD 12 | 39 | IS 3237 : Part 5 : 1986 | Special Purpose Syringes – Part 5 : Post Operation Care Syringe | Product Specification | 2017, Mar |
| MHD 12 | 40 | IS 3237 : Part 6 : 1986 | Special Purpose Syringes – Part 6 : Irrigation Syringe | Product Specification | 2017, Mar |
| MHD 12 | 41 | IS 3237 : Part 7 : 1986 | Special Purpose Syringe – Part 7 : Forced Feeding Syringe | Product Specification | 2017, Mar |
| MHD 12 | 42 | IS 3237 : Part 8 : 1986 | Special Purpose Syringes – Part 8 : Angiography Syringe | Product Specification | 2017, Mar |
| MHD 12 | 43 | IS 3423 : 1973 | Glass Containers for Transfusion Fluids | Product Specification | 2018, Jan |
| MHD 12 | 44 | IS 3829 : Part 1 : 1999 | Horizontal Cylindrical and Horizontal Rectangular Steam Sterilizers, Pressure Type (for Hospital and Pharmaceutical Use) | Product Specification | 2014 |
| MHD 12 | 45 | IS 3829 : Part 2 : 1978 | Steam Sterilizers – Part 2 : Horizontal Cylindrical High Speed Steam Sterilizers, Pressure Type (REDISGNATION OF IS 4510 : 1978) | Product Specification | 2016, Dec |
| MHD 12 | 46 | IS 3829 : Part 3 : 1985 | Steam Sterilizers – Part 3 : Pressure Sterilizers, Vertical Cylindrical Type | Product Specification | 2016, Dec |
| MHD 12 | 47 | IS 3830 : 1979 | Water Stills for Pyrogen-Free Distilled Water | Product Specification | 2016, Dec |
| MHD 12 | 48 | IS 3831 : 1979 | Sterilizer, Shallow (dressing drum) | Product Specification | 2016, Dec |
| MHD 12 | 49 | IS 3992 : 1982 | Trays, Kidney | Product Specification | 2016, Feb |
| MHD 12 | 50 | IS 3993 : 1993 | Trays, Instruments | Product Specification | 2014 |
| MHD 12 | 51 | IS 3994 : 1993 | Bowls, Wash | Product Specification | 2014 |
| MHD 12 | 52 | IS 3997 : 1982 | Jars, Ointment | Product Specification | 2016, Feb |
| MHD 12 | 53 | IS 4033 : 1968 | General Requirements for Hospital Furniture | Product Specification | 2016, Dec |
| MHD 12 | 54 | IS 4034 : 1979 | Castors for Hospital Equipment | Product Specification | 2016, Dec |
| MHD 12 | 55 | IS 4035 : 1967 | Trolleys, Stretcher | Product Specification | 2016, Dec |
| MHD 12 | 56 | IS 4036 : 1967 | Trolleys, Patient | Product Specification | 2016, Dec |
| MHD 12 | 57 | IS 4037 : 1967 | Stretchers and Stretcher Carriers | Product Specification | 2016, Dec |
| MHD 12 | 58 | IS 4148 : 1989 | Surgical Rubber Gloves | Product Specification | 2016, Nov |
| MHD 12 | 59 | IS 4266 : 1967 | Lockers, Bedside for Hospital Use | Product Specification | 2016, Dec |
| MHD 12 | 60 | IS 4267 : 1967 | Stands, Wash Hand Basin | Product Specification | 2016, Dec |
| MHD 12 | 61 | IS 4363 : 1980 | drip counter E. M. S. Pattern | Product Specification | 2017, Mar |
| MHD 12 | 62 | IS 4445 : 1967 | Filter and Filter Chamber for Blood Transfusion | Product Specification | 2016, Dec |
| MHD 12 | 63 | IS 4455 : 1967 | Trolleys, Soiled Linen | Product Specification | 2016, Dec |
| MHD 12 | 64 | IS 4458 : 1967 | Screens, Bedside | Product Specification | 2016, Dec |
| MHD 12 | 65 | IS 4494 : 1968 | Tables, Overbed | Product Specification | 2016, Dec |
| MHD 12 | 66 | IS 4769 : 1968 | Trolley, Dressing | Product Specification | 2016, Dec |
| MHD 12 | 67 | IS 4787 : 1968 | Table, Examination | Product Specification | 2016, Dec |
| MHD 12 | 68 | IS 5022 : 1989 | Sterilizers, Instruments (table Model) | Product Specification | 2014 |
| MHD 12 | 69 | IS 5029 : 1979 | Bedsteads, Hospital, General Purposes | Product Specification | 2016, Dec |
| MHD 12 | 70 | IS 5035 : 1969 | Sterilizers, Bowl and Utensil (Pedal Type) | Product Specification | 2016, Dec |
| MHD 12 | 71 | IS 5291 : 1969 | Tables, Operation, Hydraulic, Major | Product Specification | 2016, Dec |
| MHD 12 | 72 | IS 5336 : 1969 | Back Rest | Product Specification | 2016, Dec |
| MHD 12 | 73 | IS 5337 : 1969 | Cot, Dropside, Baby, Hospital | Product Specification | 2016, Dec |
| MHD 12 | 74 | IS 5630 : 1994 | Cribs (Cradles), Maternity | Product Specification | 2014 |
| MHD 12 | 75 | IS 5631 : 1970 | Trolley, Instrument, Plain and Curved | Product Specification | 2016, Dec |
| MHD 12 | 76 | IS 5880 : 1970 | Stand, Saline-Cum-Irrigator | Product Specification | 2016, Dec |
| MHD 12 | 77 | IS 6083 : 1971 | Table, Obstetric, Labour | Product Specification | 2016, Dec |
| MHD 12 | 78 | IS 6106 : 1971 | Tables, Operation, Hydraulic, Minor | Product Specification | 2016, Dec |
| MHD 12 | 79 | IS 6208 : 1971 | Spoons, Plastics, Measuring, Medicine | Product Specification | 2017, Oct |
| MHD 12 | 80 | IS 6328 : 1971 | Table, Operation, General Purposes (Non-hydraulic) | Product Specification | 2016, Dec |
| MHD 12 | 81 | IS 6593 : 1972 | Electric Serological Water-baths | Product Specification | 2016, Dec |
| MHD 12 | 82 | IS 6877 : 1977 | Cabinet, Instruments | Product Specification | 2016, Dec |
| MHD 12 | 83 | IS 6904 : 1973 | Receptacle, Waste | Product Specification | 2016, Dec |
| MHD 12 | 84 | IS 6905 : 1973 | Instruments Table, Mayo’s Type | Product Specification | 2016, Dec |
| MHD 12 | 85 | IS 7036 : 1982 | Table, Postmortem | Product Specification | 2016, Dec |
| MHD 12 | 86 | IS 7081 : 1973 | Stool, Revolving, for Hospital Use | Product Specification | 2014, Mar |
| MHD 12 | 87 | IS 7083 : 1973 | Trolley, Medicine | Product Specification | 2016, Dec |
| MHD 12 | 88 | IS 7091 : 1973 | Lifter, Bed, Adjustable | Product Specification | 2016, Dec |
| MHD 12 | 89 | IS 7099 : 1973 | Trolley, Dressing Drum | Product Specification | 2016, Dec |
| MHD 12 | 90 | IS 7171 : 1974 | Drip Counter with Filter | Product Specification | 2017, Mar |
| MHD 12 | 91 | IS 7350 : 1974 | Needles, Spinal | Product Specification | 2013 |
| MHD 12 | 92 | IS 7378 : 1974 | Bed, Fowler’s, Hospital | Product Specification | 2016, Dec |
| MHD 12 | 93 | IS 7387 : 1974 | Needle, Biopsy, Liver, Silverman’s Pattern | Product Specification | 2013 |
| MHD 12 | 94 | IS 7455 : 1974 | Sterilizer, Pressure, Hot and Cold Water | Product Specification | 2016, Dec |
| MHD 12 | 95 | IS 7523 : 1974 | Rubber Catheter (Urinary) | Product Specification | 2017 |
| MHD 12 | 96 | IS 7596 : 1974 | Table, Operation, Orthopaedic, Albee’s Type | Product Specification | 2016, Dec |
| MHD 12 | 97 | IS 8078 : 1976 | Table, Operation, Paediatric | Product Specification | 2016, Dec |
| MHD 12 | 98 | IS 8079 : 1976 | Table, Operation, Urological | Product Specification | 2016, Dec |
| MHD 12 | 99 | IS 8462 : 1977 | Sterilizer, Portable, Vertical, Pressure Type | Product Specification | 2016, Dec |
| MHD 12 | 100 | IS 9132 : 1979 | Table, Operation, Folding Type | Product Specification | 2016, Dec |
| MHD 12 | 101 | IS 9133 : 1979 | Trolley for General dical Store | Product Specification | 2016, Dec |
| MHD 12 | 102 | IS 9395 : 1979 | Bed, Intensive Care | Product Specification | 2016, Dec |
| MHD 12 | 103 | IS 9824 : Part 1 : 1996 | Transfusion equipment for medical use Part 1: Glass transfusion bottle, closures and caps | Product Specification | 2013 |
| MHD 12 | 104 | IS 9824 : Part 2 : 1995 | Transfusion equipment for medical use Part 2: Blood-taking set for single use | Product Specification | 2016, Feb |
| MHD 12 | 105 | IS 9824 : Part 3 : 1996 | Transfusion equipment for medical use Part 3: Transfusion sets for single use | Product Specification | 2018, Jan |
| MHD 12 | 106 | IS/ISO 10555 : PART 1 : 2013 | Intravascular Catheters — Sterile and Single-Use Catheters Part 1 General Requirements ( First Revision ) | Product Specification | 0 |
| MHD 12 | 107 | IS/ISO 10555 : PART 3 : 2013 | Intravascular Catheters — Sterile and Single-Use Catheters Part 3 Central Venous Catheters ( First Revision ) | Product Specification | 0 |
| MHD 12 | 108 | IS/ISO 10555 : PART 4 : 2013 | Intravascular Catheters — Sterile and Single-Use Catheters Part 4 Balloon Dilatation Catheters ( First Revision ) | Product Specification | 0 |
| MHD 12 | 109 | IS/ISO 10555 : PART 5 : 2013 | Intravascular Catheters — Sterile and Single-Use Catheters Part 5 Over-Needle Peripheral Catheters ( First Revision ) | Product Specification | 0 |
| MHD 12 | 110 | IS/ISO 11135 : 2014 | Sterilization of Health-Care Products — Ethylene Oxide — Requirements for the Development, Validation and Routine Control of a Sterilization Process for Medical Devices | 0 | |
| MHD 12 | 111 | IS/ISO 11137 : Part 1 : 2006 | Sterilization of Health Care Products — Radiation Part 1 Requirements for Development, Validation and Routine Control of a Sterilization Process for Medical Devices | 0 | |
| MHD 12 | 112 | IS/ISO 11137 : Part 2 : 2013 | Sterilization of Health Care Products — Radiation Part 2 Establishing the Sterilization Dose | 0 | |
| MHD 12 | 113 | IS/ISO 11140 : Part 3 : 2007 | Sterilization of Health Care Products — Chemical Indicators Part 3 Class 2 Indicator Systems for Use in the Bowie and Dick-Type Steam Penetration Test | 0 | |
| MHD 12 | 114 | IS/ISO 11140 : Part 4 : 2007 | Sterilization of Health Care Products — Chemical Indicators Part 4 Class 2 Indicators as an Alternative to the Bowie and Dick-type Test for Detection of Steam Penetration | 0 | |
| MHD 12 | 115 | IS/ISO 11140 : Part 5 : 2007 | Sterilization of Health Care Products — Chemical Indicators Part 5 Class 2 Indicators for Bowie and Dick-Type Air Removal Tests | Others | 0 |
| MHD 12 | 116 | IS/ISO 11607 : Part 1 : 2006 | Packaging for Terminally Sterilized Medical Devices Part 1 Requirements for Materials, Sterile Barrier Systems and Packaging Systems | 0 | |
| MHD 12 | 117 | IS/ISO 11607 : Part 2 : 2006 | Packing for Terminally Sterilized Medical Devices Part 2 Validation Requirements for Forming, Sealing and Assembly Processes | Methods of tests | 0 |
| MHD 12 | 118 | IS/ISO 14161 : 2009 | Sterilization of Health Care Products — Biological Indicators — Guidance for the Selection, Use and Interpretation of Results | Code of Practice | 0 |
| MHD 12 | 119 | IS/ISO 15883 : Part 1 : 2006 | Washer-Disinfectors Part 1 General Requirements, Term and Definations and Tests | Product Specification | 0 |
| MHD 12 | 120 | IS/ISO 15883 : Part 2 : 2006 | Washer-Disinfectors Part 2 Requirements and Tests for Washer-Disinfectors Employing Thermal Disinfection for Surgical Instruments, Anaesthetic Equipment, Bowls, Dishes, Receivers, Utensils, Glassware, Etc | 0 | |
| MHD 12 | 121 | IS/ISO 15883 : Part 3 : 2006 | Washer-Disinfectors Part 3 Requirements and Tests for Washer-Disinfectors Employing Thermal Disinfection for Human Waste Containers | 0 | |
| MHD 12 | 122 | IS/ISO 3826 : Part 1 : 2013 | Plastics Collapsible Containers for Human Blood and Blood Components Part 1 Conventional Containers | 0 | |
| MHD 12 | 123 | IS/ISO 3826 : Part 2 : 2008 | Plastics Collapsible Containers for Human Blood and Blood Components Part 2 Graphical Symbols for Use on Lables and Instruction Leaflets | Product Specification | 0 |
| MHD 12 | 124 | IS/ISO 3826 : Part 3 : 2006 | Plastics Collapsible Containers for Human Blood and Blood Components Part 3 Blood Bag Systems with Integrated Features | Product Specification | 0 |
| MHD 12 | 125 | IS/ISO 3826 : Part 4 : 2015 | Plastics Collapsible Containers for Human Blood and Blood Components Part 4 Aphaeresis Blood Bag Systems with Integrated Features | 0 | |
| MHD 12 | 126 | IS/ISO 8362 : PART 1 : 2003 | Injection Containers And Accessories Part-1 Injection Vials Made Of Glass Tubing | Product Specification | 2014 |
| MHD 13 | 1 | IS 10568 : 1983 | Knife, Teat, McLean | Product Specification | 2016, Feb |
| MHD 13 | 2 | IS 10937 : 1984 | Nose Ring and Key, Bull | Product Specification | 2016, Feb |
| MHD 13 | 3 | IS 10938 : 1984 | Searcher, Double Edged with Handle and Sheath | Product Specification | 2016, Feb |
| MHD 13 | 4 | IS 10940 : 1984 | Castrator | Product Specification | 2016, Feb |
| MHD 13 | 5 | IS 10953 : 1984 | Catheter Uterine, Single Channel (Nelson Type) | Product Specification | 2016, Feb |
| MHD 13 | 6 | IS 10954 : 1984 | Catheter, Cow | Product Specification | 2016, Feb |
| MHD 13 | 7 | IS 10955 : 1984 | Gimlet for Trephine | Product Specification | 2016, Feb |
| MHD 13 | 8 | IS 10963 : 1984 | Forceps, Hoof Testing | Product Specification | 2016, Feb |
| MHD 13 | 9 | IS 10964 : 1984 | Forceps Bullet, Veterinary | Product Specification | 2016, Feb |
| MHD 13 | 10 | IS 12243 : 1988 | Rasp, Tooth, Reversible | Product Specification | 2016, Feb |
| MHD 13 | 11 | IS 12245 : 1988 | Dilators, Teat (Hudson) | Product Specification | 2016, Feb |
| MHD 13 | 12 | IS 12246 : 1988 | Irons, Pyro-puncture with Copper Needles | Product Specification | 2016, Mar |
| MHD 13 | 13 | IS 12302 : 1988 | Chisel, Tooth, Guarded (Large Animals) | Product Specification | 2016, Mar |
| MHD 13 | 14 | IS 12329 : 1988 | Self-centring Bone Holding Forceps | Product Specification | 2016, Feb |
| MHD 13 | 15 | IS 12344 : 1988 | Reduction Forceps | Product Specification | 2016, Feb |
| MHD 13 | 16 | IS 12670 : 1989 | Veterinary – Pump Stomach | Product Specification | 2016, Feb |
| MHD 13 | 17 | IS 14420 : 1996 | Tracheal Tubes for Large Animals Used for Veterinary Anaesthesia | Product Specification | 2018, Mar |
| MHD 14 | 1 | IS 10905 : Part 1 : 1984 | Recommendations for basic requirements of general hospital buildings: Part 1 Administrative and hospital services department buildings | Code of Practice | 2018 |
| MHD 14 | 2 | IS 10905 : Part 2 : 1984 | Recommendations for basic requirements of general hospital buildings: Part 2 Medical services department buildings | Code of Practice | 2018 |
| MHD 14 | 3 | IS 10905 : Part 3 : 1984 | Recommendations for Basic Requirements of General Hospital Buildings – Part 3 : Engineering Services Department Buildings | Code of Practice | 2018 |
| MHD 14 | 4 | IS 12377 : 2016 | Classification and Matrix for Various Categories of Hospitals (First Revision) | Code of Practice | 0 |
| MHD 14 | 5 | IS 12433 : Part 1 : 1988 | Basic requirements for hospital planning:Part 1 upto 30 bedded hospitals | Code of Practice | 2018 |
| MHD 14 | 6 | IS 12433 : Part 2 : 2001 | Basic Requirements for Hospital Planning – Part 2 : UP to 100 Bedded Hospital | Code of Practice | 2018 |
| MHD 14 | 7 | IS 13808 : Part 1 : 1993 | Quality management for hospital services(upto 30 bedded hospitals)Guidelines: Part 1Out patient Department(OPD) and emergency services | System Standard | 2018 |
| MHD 14 | 8 | IS 13808 : Part 2 : 1993 | Quality management procedures for diagnostic and blood transfusion services-Guidelines Part 2:Upto 30 bedded hospitals | System Standard | 2018 |
| MHD 14 | 9 | IS 13808 : Part 3 : 1995 | Quality management for hospital services(upto 30 bedded hospitals)Guidelines Part 3: Wards, nursing services and operation theatre | System Standard | 2016, Dec |
| MHD 14 | 10 | IS 13808 : Part 4 : 1996 | Quality management for hospital services(upto 30 bedded hospitals)Guidelines Part 4:Hospital Support services | System Standard | 2016, Dec |
| MHD 14 | 11 | IS 13808 : Part 5 : 1996 | Quality management for hospital services(upto 30 bedded hospitals)Guidelines Part 5:Hospital Equipment Management | System Standard | 2016, Dec |
| MHD 14 | 12 | IS 15195 : 2002 | Performance guidelines for quality assurance in hospital services upto 30 bedded hospitals | System Standard | 2017, Oct |
| MHD 14 | 13 | IS 15461 : 2004 | Performance guidelines for quality assurance in hospital services upto 100 bedded hospitals | System Standard | 2014 |
| MHD 14 | 14 | IS 15551 : 2003 | Quality management systems -Guidelines for process improvements in health service organization | System Standard | 2014 |
| MHD 14 | 15 | IS 15784 : 2007 | Healthcare facilities – Particular requiremennts | System Standard | 2017, Sep |
| MHD 14 | 16 | IS 15902 : 2011 | Guidelines For Nursing Home | Code of Practice | 2015, Nov |
| MHD 14 | 17 | IS 15903 : 2010 | Guidelines For Maternity Nursing Home | Code of Practice | 2015, Nov |
| MHD 14 | 18 | IS 15904 : 2011 | Guidelines For Single Doctor Clinic–Including Dental Clinic | Code of Practice | 2015, Nov |
| MHD 14 | 19 | IS 23485 : 2019 | Medical Devices — Quality Management System Requirements and Essential Principles of Safety and Performance for Medical Devices | System Standard | 0 |
| MHD 14 | 20 | IS/ISO 13485 : 2016 | Medical Devices – Quality Management Systems – Requirements for Regulatory Purposes (First Revision) | System Standard | 0 |
| MHD 14 | 21 | IS/ISO 14971 : 2007 | Medical Devices — Application of Risk Management to Medical Devices | 0 | |
| MHD 14 | 22 | IS/ISO 15189 : 2012 | Medical Laboratories – Requirements for Quality and Competence | System Standard | 2014, May |
| MHD 14 | 23 | IS/ISO 15197 : 2013 | In vitro Diagnostic Test Systems — Requirements for Blood-Glucose Monitoring System for Self-Testing in Managing Diabetes Mellitus | Methods of tests | 0 |
| MHD 14 | 24 | IS/ISO 15223 : Part 1 : 2012 | Medical Devices — Symbols to be Used with Medical Device Labels, Labelling and Information to be Supplied Part 1 General Requirements | Terminology | 2014, Oct |
| MHD 14 | 25 | IS/ISO 15223 : Part 2 : 2010 | Medical devices — Symbols to be Used with Medical Device Labels, Labelling, and Information to be Supplied Part 2 Symbol Development, Selection and Validation | Code of Practice | 0 |
| MHD 14 | 26 | IS/ISO 16142 : Part 2 : 2017 | Medical devices — Recognized Essential Principles of Safety and Performance of Medical Devices Part 2 General Essential Principles and Additional Specific Essential Principles for all IVD Medical Devices and Guidance on the Selection of Standards | Safety Standard | 0 |
| MHD 14 | 27 | IS/ISO 17822 : Part 1 : 2014 | In vitro Diagnostic Test Systems — Qualitative Nucleic Acid-based in vitro Examination Procedures for Detection and Identification of Microbial Pathogens Part 1 General Requirements, Terms and Definitions | Terminology | 0 |
| MHD 14 | 28 | IS/ISO 23640 : 2011 | In Vitro Diagnostic Medical Devices — Evaluation of Stability of in vitro Diagnostic Reagents | Methods of tests | 0 |
| MHD 14 | 29 | IS/ISO 62304 : 2015 | Medical Device Software — Software Life Cycle Processes | Methods of tests | 0 |
| MHD 14 | 30 | IS/ISO/IEC GUIDE 60 : 2004 | Conformity Assessment – Code of Good Practice | 0 | |
| MHD 14 | 31 | IS/ISO/TR 24971 : 2013 | Medical Devices — Guidance on the Application of ISO 14971 | Methods of tests | 0 |
| MHD 15 | 1 | IS 10550 : 1983 | Medical Treatment Lamps | Product Specification | 2016, Dec |
| MHD 15 | 2 | IS 11302 : Part 2 : 1985 | Electroencephalograph (EEG) – Part 2 : Performance Requirements | Product Specification | 2016, Dec |
| MHD 15 | 3 | IS 11393 : 1985 | Scintillation Counters | Product Specification | 2016, Dec |
| MHD 15 | 4 | IS 11478 : 2018 | Guidelines for Administrative, Medical, and Nursing Staff Concerned with the Safe Use of Medical Electrical Equipment and Medical Electrical Systems ( First Revision ) | 0 | |
| MHD 15 | 5 | IS 11701 : 1986 | Guide For Testing And Callibration Of Ultrasonic Therapeutic Equipment | Code of Practice | 2016, Feb |
| MHD 15 | 6 | IS 11753 : 1986 | Electrical Impedance Plethysmograph | Product Specification | 2016, Dec |
| MHD 15 | 7 | IS 11789 : 1986 | Determination of the Maximum Symmetrical Radiation Field in the Radiation Beam from a Rotating Anode X-ray Tube for Medical Diagnosis | Methods of tests | 2016, Dec |
| MHD 15 | 8 | IS 13450 : Part 1 : 2018 | Medical Electrical Equipment – Part 1 General Requirements for Basic Safety and Essential Peformance (Second Revision) | Methods of tests | 0 |
| MHD 15 | 9 | IS 13450 : Part 1 : SEC 2 : 2018 | Medical Electrical Equipment Part 1 General Requirements for the Basic Safety and Essential Performance Section 2 Collateral standard: Electromagnetic disturbances — Requirements and tests ( First Revision ) | Safety Standard | 0 |
| MHD 15 | 10 | IS 13450 : Part 1 : Sec 3 : 2014 | Medical Electrical Equipment Part 1 General Requirements for Basic Safety and Essential Performance Section 3 Collateral Standards : Radiation Protection in Diagnostic X-ray Equipment | Product Specification | 0 |
| MHD 15 | 11 | IS 13450 : Part 2 : Sec 1 : 2018 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 1 Electron accelerators in the range 1 MeV to 50 MeV (First Revision) | Safety Standard | 0 |
| MHD 15 | 12 | IS 13450 : Part 2 : Sec 10 : 2018 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 10 Nerve and muscle stimulators | 0 | |
| MHD 15 | 13 | IS 13450 : Part 2 : Sec 11 : 2018 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 11 Gamma beam therapy equipment ( First Revision ) | Product Specification | 0 |
| MHD 15 | 14 | IS 13450 : Part 2 : Sec 16 : 2019 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 16 Haemodialysis, haemodiafiltration and haemofiltration equipment | Product Specification | 0 |
| MHD 15 | 15 | IS 13450 : Part 2 : Sec 17 : 2018 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 17 Automatically-controlled brachytherapy afterloading equipment ( First Revision ) | Safety Standard | 0 |
| MHD 15 | 16 | IS 13450 : Part 2 : Sec 18 : 2014 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 18 Endoscopic Equipment | Product Specification | 0 |
| MHD 15 | 17 | IS 13450 : Part 2 : Sec 19 : 2018 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 19 Baby incubator | 0 | |
| MHD 15 | 18 | IS 13450 : Part 2 : Sec 2 : 2019 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 2 High frequency surgical equipment and high frequency surgical accessories | Product Specification | 0 |
| MHD 15 | 19 | IS 13450 : Part 2 : Sec 20 : 2018 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 20 Infant Transport Incubators | 0 | |
| MHD 15 | 20 | IS 13450 : Part 2 : Sec 21 : 2018 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Sec 21 Infant Radian Warmer | Product Specification | 0 |
| MHD 15 | 21 | IS 13450 : Part 2 : Sec 22 : 2019 | Medical Electrical Equipment Part 2 Particular Requirements for Basic Safety and Essential Performance Section 22 Surgical, cosmetic, therapeutic and diagnostic laser equipment | Product Specification | 0 |
| MHD 15 | 22 | IS 13450 : Part 2 : Sec 23 : 2018 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 23 Transcutaneous partial pressure monitoring equipment | 0 | |
| MHD 15 | 23 | IS 13450 : PART 2 : SEC 24 : 2019 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 24 Infusion pumps and controllers ( First Revision ) | Product Specification | 0 |
| MHD 15 | 24 | IS 13450 : Part 2 : Sec 25 : 2018 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 25 Electrocardiographs | Product Specification | 0 |
| MHD 15 | 25 | IS 13450 : Part 2 : Sec 26 : 2018 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 26 Electroencephalographs | 0 | |
| MHD 15 | 26 | IS 13450 : Part 2 : Sec 27 : 2018 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 27 Electrocardiographic Monitoring Equipment | Product Specification | 0 |
| MHD 15 | 27 | IS 13450 : Part 2 : Sec 29 : 2018 | Medical Electrical Equipment Part 2 Particular Requirements for The Basic Safety and Essential Performance Section 29 Radiotherapy Simulators ( First Revision ) | Product Specification | 0 |
| MHD 15 | 28 | IS 13450 : Part 2 : Sec 30 : 2008 | Medical Electrical Equipment : Part 2 Particular Requirements for The Safety, Section 30 Essential Performance of Automatic Cycling Non-invasive Blood Pressure Monitoring Equipment | Safety Standard | 2018, Apr |
| MHD 15 | 29 | IS 13450 : Part 2 : Sec 31 : 2019 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 31 External cardiac pacemakers with internal power source | Product Specification | 0 |
| MHD 15 | 30 | IS 13450 : Part 2 : Sec 33 : 2018 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 33 Magnetic resonance equipment for medical diagnosis | Product Specification | 0 |
| MHD 15 | 31 | IS 13450 : Part 2 : Sec 36 : 2019 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 36 Equipment for extra corporeally induced lithotripsy | Product Specification | 0 |
| MHD 15 | 32 | IS 13450 : Part 2 : Sec 37 : 2019 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 37 Ultrasonic medical diagnostic and monitoring equipment | Product Specification | 0 |
| MHD 15 | 33 | IS 13450 : Part 2 : Sec 39 : 2019 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 39 Peritoneal dialysis equipment | Product Specification | 0 |
| MHD 15 | 34 | IS 13450 : PART 2 : SEC 4 : 2018 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 4 Cardiac defibrillators ( First Revision ) | Safety Standard | 0 |
| MHD 15 | 35 | IS 13450 : Part 2 : Sec 43 : 2016 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 43 X-ray equipment for interventional procedures ( First Revision ) | Safety Standard | 0 |
| MHD 15 | 36 | IS 13450 : Part 2 : Sec 44 : 2016 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 44 X-ray equipment for computed tomography ( First Revision ) | Safety Standard | 0 |
| MHD 15 | 37 | IS 13450 : Part 2 : Sec 45 : 2016 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 45 Mammographic X-ray equipment and mammographic stereotactic devices ( First Revision ) | Safety Standard | 0 |
| MHD 15 | 38 | IS 13450 : Part 2 : Sec 47 : 2018 | Medical Electrical Equipment Part 1 General Requirements for the Basic Safety and Essential Performance Section 2 Collateral standard: Electromagnetic disturbances — Requirements and tests ( First Revision ) | 0 | |
| MHD 15 | 39 | IS 13450 : Part 2 : Sec 49 : 2018 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 49 Multifunction Patient Monitoring Equipment (First Revision) | Safety Standard | 0 |
| MHD 15 | 40 | IS 13450 : PART 2 : SEC 5 : 2018 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 5 Ultrasonic physiotherapy equipment ( First Revision ) | Product Specification | 0 |
| MHD 15 | 41 | IS 13450 : Part 2 : Sec 54 : 2016 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 54 X-ray equipment for radiography and radioscopy | Product Specification | 0 |
| MHD 15 | 42 | IS 13450 : Part 2 : Sec 6 : 2018 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 6 Microwave therapy equipment | Product Specification | 0 |
| MHD 15 | 43 | IS 13450 : Part 2 : Sec 62 : 2018 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 62 High intensity therapeutic ultrasound ( HITU ) equipment | 0 | |
| MHD 15 | 44 | IS 13450 : Part 2 : Sec 63 : 2016 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 63 Dental extra-oral X-ray equipment | Product Specification | 0 |
| MHD 15 | 45 | IS 13450 : Part 2 : Sec 65 : 2016 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 65 Dental intra-oral X-ray equipment | Product Specification | 0 |
| MHD 15 | 46 | IS 13450 : Part 2 : Sec 76 : 2019 | Medical Electrical Equipment Part 2 Particular Requirements for Basic Safety and Essential Performance Section 76 Low energy ionized gas haemostasis equipment | Product Specification | 0 |
| MHD 15 | 47 | IS 13709 : 1993 | Medical Electrical Equipment – Dental X-ray Equipment – Radiation Safety | Product Specification | 2015 |
| MHD 15 | 48 | IS 13812 : Part 19 : 1994 | Medical electrical equipment – Particular requirements for safety Part 19 Baby incubators | Safety Standard | 2015 |
| MHD 15 | 49 | IS 13814 : 1993 | Determination of the image distortion of electro-optical X-ray image intensifiers | Methods of tests | 2015 |
| MHD 15 | 50 | IS 14180 : 1994 | Graphical Symbols For Electrical Equipment In Medical Practice | Terminology | 2015 |
| MHD 15 | 51 | IS 15584 : 2005 | Medical X-ray Films | Product Specification | 2017, Jul |
| MHD 15 | 52 | IS 7352 : 1974 | X-ray Lead-rubber Protective Aprons | Product Specification | 2017 |
| MHD 15 | 53 | IS 7583 : 1991 | Medical Electrical Equipment – High Frequency Surgical Equipment | Product Specification | 2016, Dec |
| MHD 15 | 54 | IS 7620 : Part 1 : 1986 | Diagnostic Medical X-ray Equipment – Part 1 : General and Safety Requirements | Product Specification | 2014 |
| MHD 15 | 55 | IS 7620 : Part 2 : 1986 | Diagnostic Medical X-ray Equipment – Part 2 : Performance Requirements | Product Specification | 2014 |
| MHD 15 | 56 | IS 7620 : Part 3 : 1991 | Medical electrical equipment – Diagnostic X-ray equipment: Part 3 Radiation safety requirements | Product Specification | 2016, Dec |
| MHD 15 | 57 | IS 8048 : 1985 | Electrocardiograph | Product Specification | 2016, Dec |
| MHD 15 | 58 | IS 80601 : Part 2 : Sec 56 : 2017 | Medical Electrical Equipment Part 2 Particular Requirements for Basic Safety and Essential Performance Section 56 Clinical thermometers for body temperature measurement | Product Specification | 0 |
| MHD 15 | 59 | IS 8885 : 1994 | Medical Electrical Equipment – Electromyograph | Product Specification | 2015 |
| MHD 15 | 60 | IS/IEC 60336 : 2005 | Medical Electrical Equipment – X-Ray Tube Assemblies for Medical Diagnosis – Characteristics of Focal Spots | Methods of tests | 2015, Oct |
| MHD 15 | 61 | IS/IEC 61168 : 1993 | Radiotherapy Simulators — Functional Performance Characteristics | Product Specification | 0 |
| MHD 15 | 62 | IS/IEC 61170 : 1993 | Radiotherapy Simulators — Guidelines for Functional Performance Characteristics | Code of Practice | 0 |
| MHD 15 | 63 | IS/IEC 61262 : PART 1 : 1994 | Medical Electrical Equipment – Characteristics of Electro-Optical X-Ray Image Intensifiers | Methods of tests | 2015, Feb |
| MHD 15 | 64 | IS/IEC 61262 : PART 2 : 1994 | Medical Electrical Equipmnent Characteristics of Eectro-Optical X-ray Image Intensifiers : Part 2 Determination of the Conversion Factor | Methods of tests | 2014 |
| MHD 15 | 65 | IS/IEC 61262 : PART 3 : 1994 | Medical Electrical Equipment – Charactistics of Electro – Optical X-Rays Image Intensifiers Part 3 Determination of the Luminance Distribution and Luminance Non -Uniformity | Methods of tests | 2016, Dec |
| MHD 15 | 66 | IS/IEC 61331 : Part 2 : 2014 | Protective Devices Against Diagnostic Medical X-Radiation Part 2 Translucent Protective Plates | 0 | |
| MHD 15 | 67 | IS/IEC 61675 : Part 1 : 2013 | Radionuclide Imaging Devices — Characteristics and Test Conditions Part 1 Positron Emission Tomographs | Methods of tests | 0 |
| MHD 15 | 68 | IS/IEC 61675 : Part 2 : 2015 | Radionuclide Imaging Devices — Characteristics and Test Conditions Part 2 Gamma Cameras for Planar, Whole Body, and SPECT Imaging | Product Specification | 0 |
| MHD 15 | 69 | IS/IEC 61685 : 2001 | Ultrasonics — Flow Measurement Systems — Flow Test Object | Product Specification | 0 |
| MHD 15 | 70 | IS/IEC 61689 : 2013 | Ultrasonics — Physiotherapy Systems — Field Specifications and Methods of Measurement in the Frequency Range 0,5 MHz to 5 MHz | 0 | |
| MHD 15 | 71 | IS/IEC 61847 : 1998 | Ultrasonics — Surgical Systems — Measurement and Declaration of the Basic Output Characteristics | Product Specification | 0 |
| MHD 15 | 72 | IS/IEC 62220 : Part 1 : Sec 2 : 2007 | Medical Electrical Equipment-Characteristics of Digital X-Ray Imaging Devices Part 1-2 Determination of the Detective Quantum Efficiency Detectors Used in Mammography | Methods of tests | 2017, May |
| MHD 15 | 73 | IS/IEC/TR 60788 : 2004 | Medical Electrical Euipment — Glossary of Defined Terms | Terminology | 2015 |
| MHD 15 | 74 | IS/IEC/TR 61852 : 1998 | Medical Electrical Equipment — Digital Imaging and Communications in Medicine ( DICOM ) — Radiotherapy Objects | Others | 0 |
| MHD 15 | 75 | IS/IEC/TR 61948 : Part 3 : 2018 | Nuclear Medicine Instrumentation — Routine Tests Part 3 Positron Emission Tomographs | Methods of tests | 0 |
| MHD 15 | 76 | IS/IEC/TS 62556 : 2014 | Ultrasonics — Field Characterization — Specification and Measurement of Field Parameters for High Intensity Therapeutic Ultrasound ( HITU ) Transducers and Systems | 0 | |
| MHD 15 | 77 | IS/IEC/TS 62566 : 2014 | Ultrasonics — Field Characterization — Specification and Measurement of Field Parameters for High Intensity Therapeutic Ultrasound ( HITU ) Transducers and Systems | 0 | |
| MHD 15 | 78 | IS/IEC62353 : 2014 | Medical Electrical Equipment — Recurrent Test and Test after Repair of Medical Electrical Equipment ( First Revision ) | Others | 0 |
| MHD 15 | 79 | IS/ISO 13450 : Part 2 : Sec 10 : 2018 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 10 Nerve and muscle stimulators | 0 | |
| MHD 15 | 80 | IS/ISO 14708 : Part 2 : 2012 | Implants for Surgery- Active Implantable Medical Devices Part 2 Cardiac Pacemakers | Product Specification | 2018, Jan |
| MHD 15 | 81 | IS/ISO 4090 : 2001 | Photography – Medical radiographic cassettes/screens/films and hard-copy imaging films – Dimensions and specifications | Product Specification | 2018, Jul |
| MHD 15 | 82 | IS/ISO 80601 : Part 2 : Sec 12 : 2011 | Medical Electrical Equipment Part 2-12 Particular Requirements for Basic Safety and Essential Performance of Critical Care Ventilators | Product Specification | 0 |
| MHD 15 | 83 | IS/ISO 80601 : Part 2 : Sec 13 : 2011 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 13 Anaesthetic workstation | Product Specification | 0 |
| MHD 15 | 84 | IS/ISO 80601 : Part 2 : Sec 61 : 2011 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 61 Pulse Oximeter Equipment | Safety Standard | 2014, Sep |
| MHD 17 | 1 | IS 17090 : Part 3 : 2008 | Health Informatics — Public Key Infrastructure Part 3 Policy Management of Certification Authority | 0 | |
| MHD 17 | 2 | IS/IEC 82304 : Part 1 : 2016 | Health Software Part 1 General Requirements for Product Safety | Others | 0 |
| MHD 17 | 3 | IS/IEC/TR 80001 : Part 2 : Sec 2 : 2012 | Application of Risk Management for IT-Networks Incorporating Medical Devices Part 2-2 Guidance for the Disclosure and Communication of Medical Device Security Needs, Risks and Controls | Others | 0 |
| MHD 17 | 4 | IS/IEC/TS 25238 : 2007 | Health Informatics – Classification of Safety Risks from Health Software | Others | 0 |
| MHD 17 | 5 | IS/ISO 10159 : 2011 | Health Informatics — Messages and Communication — Web Access Reference Manifest | Others | 0 |
| MHD 17 | 6 | IS/ISO 11073 : Part 90101 : 2008 | Health Informatics — Point-of-Care Medical Device Communication Part 90101 Analytical Instruments — Point-of-Care Test | Others | 0 |
| MHD 17 | 7 | IS/ISO 11073 : Part 91064 : 2009 | Health Informatics — Standard Communication Protocol Part 91064 Computer-assisted Electrocardiography | Others | 0 |
| MHD 17 | 8 | IS/ISO 11238 : 2012 | Health Informatics — Identification of Medicinal Products — Data Elements and Structures for the Unique Identification and Exchange of Regulated Information on Substances | Others | 0 |
| MHD 17 | 9 | IS/ISO 11239 : 2012 | Health Informatics — Identification of Medicinal Products — Data Elements and Structures for the Unique Identification and Exchange of Regulated Information on Pharmaceutical Dose Forms, Units of Presentation, Routes of Administration and Packaging | Others | 0 |
| MHD 17 | 10 | IS/ISO 11240 : 2012 | Health Informatics — Identification of Medicinal Products — Data Elements and Structures for the Unique Identification and Exchange of Units of Measurement | Others | 0 |
| MHD 17 | 11 | IS/ISO 11616 : 2017 | Health Informatics — Identification of Medicinal Products — Data Elements and Structures for Unique Identification and Exchange of Regulated Pharmaceutical Product Information | Others | 0 |
| MHD 17 | 12 | IS/ISO 12052 : 2017 | Health Informatics — Digital Imaging and Communication in Medicine ( DICOM ) Including Workflow and Data Management ( First Revision ) | Others | 0 |
| MHD 17 | 13 | IS/ISO 12967 : Part 1 : 2009 | Health Informatics — Service Architecture Part 1 Enterprise Viewpoint | Others | 0 |
| MHD 17 | 14 | IS/ISO 12967 : Part 2 : 2009 | Health Informatics — Service Architecture Part 2 Information Viewpoint | Others | 0 |
| MHD 17 | 15 | IS/ISO 12967 : Part 3 : 2009 | Health Informatics — Service Architecture Part 3 Computational Viewpoint | Others | 0 |
| MHD 17 | 16 | IS/ISO 13119 : 2012 | Health Informatics — Clinical Knowledge Resources — Metadata | 0 | |
| MHD 17 | 17 | IS/ISO 13606 : Part 1 : 2008 | Health Informatics – Electronic Health Record Communication Part 1 Reference Model | Others | 2015, Nov |
| MHD 17 | 18 | IS/ISO 13606 : Part 5 : 2010 | Health Informatics — Electronic Health Record Communication Part 5 Interface Specification | Others | 0 |
| MHD 17 | 19 | IS/ISO 13606-2 : 2008 | Health Informatics – Electronic Health Record Communication Part 2 Archetype Interchange Specification | Others | 2015, Jul |
| MHD 17 | 20 | IS/ISO 13606-3 : 2009 | Health Informatics – Electronic Health Record Communication Part 3 References Archetypes and Terms Lists | Others | 2014, Apr |
| MHD 17 | 21 | IS/ISO 17090 : Part 1 : 2013 | Health Informatics — Public Key Infrastructure Part 1 Overview of Digital Certificate Services | Others | 0 |
| MHD 17 | 22 | IS/ISO 17090 : Part 2 : 2015 | Health Informatics — Public Key Infrastructure Part 2 Certificate Profile | Others | 0 |
| MHD 17 | 23 | IS/ISO 17090 : Part 4 : 2014 | Health Informatics — Public Key Infrastructure Part 4 Digital Signatures for Healthcare Documents | Others | 0 |
| MHD 17 | 24 | IS/ISO 17090 : Part 5 : 2017 | Health Informatics — Public Key Infrastructure Part 5 Authentication Using Healthcare PKI Credentials | Others | 0 |
| MHD 17 | 25 | IS/ISO 17115 : 2007 | Health Informatics – Vocabulary for Terminological Systems | Terminology | 2013, Mar |
| MHD 17 | 26 | IS/ISO 17432 : 2004 | Health Informatics — Messages and Communication — Web Access to DICOM Persistent Objects | Others | 0 |
| MHD 17 | 27 | IS/ISO 1828 : 2012 | Health Informatics — Categorial Structure for Terminological Systems of Surgical Procedures | Others | 0 |
| MHD 17 | 28 | IS/ISO 18308 : 2011 | Health Informatics – Requirements for an Electronic Health Record Architecture | Others | 2014, Jul |
| MHD 17 | 29 | IS/ISO 20301 : 2014 | Health Informatics – Health Cards – General Characteristics (First Revision) | Others | 0 |
| MHD 17 | 30 | IS/ISO 21090 : 2011 | Health Informatics — Harmonized Data Types for Information Interchange | Others | 0 |
| MHD 17 | 31 | IS/ISO 21549 : Part 5 : 2015 | Health Informatics — Patient Healthcard Data Part 5 Identification Data | Others | 0 |
| MHD 17 | 32 | IS/ISO 21549 : Part 6 : 2008 | Health Informatics – Patient Health Card Data Part 6 Administrative Data | 0 | |
| MHD 17 | 33 | IS/ISO 21549 : Part 7 : 2016 | Health Informatics — Patient Healthcard Data Part 7 Medication Data | Others | 0 |
| MHD 17 | 34 | IS/ISO 21549 : Part 8 : 2010 | Health Informatics – Patient Health Card Data Part 8 Links | Others | 0 |
| MHD 17 | 35 | IS/ISO 22600 : Part 1 : 2014 | Health Informatics – Privilege Management and Access Control Part 1 Overview and Policy Management | Others | 0 |
| MHD 17 | 36 | IS/ISO 22600 : Part 2 : 2014 | Health Informatics — Privilege Management and Access Control Part 2 Formal Models | Others | 0 |
| MHD 17 | 37 | IS/ISO 22600 : Part 3 : 2014 | Health Informatics — Privilege Management and Access Control Part 3 Implementations | Others | 0 |
| MHD 17 | 38 | IS/ISO 22857 : 2013 | Health Informatics — Guidelines on Data Protection to Facilitate Trans-border Flows of Personal Health Data | Others | 0 |
| MHD 17 | 39 | IS/ISO 25237 : 2017 | Health Informatics — Pseudonymization | Others | 0 |
| MHD 17 | 40 | IS/ISO 27789 : 2013 | Health Informatics – Audit Trails for Electronic Health Records | Others | 0 |
| MHD 17 | 41 | IS/ISO 27799 : 2016 | Health Informatics — Information Security Management in Health Using ISO / IEC 27002 | Others | 0 |
| MHD 17 | 42 | IS/ISO/IEC 11703 : Part 20601 : 2018 | Health Informatics — Personal Health Device Communication Part 20601 Application Profile — Optimized Exchange Protocol | 0 | |
| MHD 17 | 43 | IS/ISO/IEEE 11073 : Part 00103 : 2015 | Health Informatics — Personal Health Device Communication Part 00103 Overview | Others | 0 |
| MHD 17 | 44 | IS/ISO/IEEE 11073 : Part 10201 : 2004 | Health Informatics — Point-of-Care Medical Device Communication Part 10201 Domain Information Model | Others | 0 |
| MHD 17 | 45 | IS/ISO/IEEE 11073 : Part 10404 : 2010 | Health Informatics — Personal Health Device Communication Part 10404 Device Specialization — Pulse Oximeter | Others | 0 |
| MHD 17 | 46 | IS/ISO/IEEE 11073 : Part 10406 : 2012 | Health Informatics — Personal Health Device Communication Part 10406 Device Specialization — Basic Electrocardiograph ( ECG ) ( 1- to 3-lead ECG ) | Others | 0 |
| MHD 17 | 47 | IS/ISO/IEEE 11073 : Part 10408 : 2010 | Health Informatics — Personal Health Device Communication Part 10408 Device Specialization — Thermometer | Others | 0 |
| MHD 17 | 48 | IS/ISO/IEEE 11073 : Part 10415 : 2010 | Health Informatics — Personal Health Device Communication Part 10415 Device Specialization — Weighing Scale | Others | 0 |
| MHD 17 | 49 | IS/ISO/IEEE 11073 : Part 10417 : 2017 | Health Informatics — Personal Health Device Communication Part 10417 Device Specialization — Glucose Meter | Others | 0 |
| MHD 17 | 50 | IS/ISO/IEEE 11073 : Part 10418 : 2014 | Health Informatics — Personal Health Device Communication Part 10418 Device Specialization: International Normalized Ratio ( INR ) Monitor | Others | 0 |
| MHD 17 | 51 | IS/ISO/IEEE 11073 : Part 10419 : 2016 | Health Informatics — Personal Health Device Communication Part 10419 Device Specialization — Insulin Pump | Others | 0 |
| MHD 17 | 52 | IS/ISO/IEEE 11073 : Part 10420 : 2012 | Health Informatics — Personal Health Device Communication Part 10420 Device Specialization — Body Composition Analyzer | Others | 0 |
| MHD 17 | 53 | IS/ISO/IEEE 11073 : Part 10421 : 2012 | Health Informatics — Personal Health Device Communication Part 10421 Device Specialization — Peak Expiratory Flow Monitor ( Peak Flow ) | Others | 0 |
| MHD 17 | 54 | IS/ISO/IEEE 11073 : Part 10422 : 2017 | Health Informatics — Personal Health Device Communication Part 10422 Device Specialization — Urine Analyser | Others | 0 |
| MHD 17 | 55 | IS/ISO/IEEE 11073 : Part 10424 : 2019 | Health informatics — Personal Health Device Communication Part 10424 Device Specialization — Sleep Apnoea Breathing Therapy Equipment ( SABTE ) | Others | 0 |
| MHD 17 | 56 | IS/ISO/IEEE 11073 : Part 10425 : 2016 | Health Informatics — Personal Health Device Communication Part 10425 Device Specialization — Continuous Glucose Monitor ( CGM ) | Others | 0 |
| MHD 17 | 57 | IS/ISO/IEEE 11073 : Part 10427 : 2018 | Health Informatics — Personal Health Device Communication Part 10427 Device Specialization — Power Status Monitor of Personal Health Devices | Others | 0 |
| MHD 17 | 58 | IS/ISO/IEEE 11073 : Part 10441 : 2015 | Health Informatics — Personal Health Device Communication Part 10441 Device Specialization — Cardiovascular Fitness and Activity Monitor | Others | 0 |
| MHD 17 | 59 | IS/ISO/IEEE 11073 : Part 10471 : 2010 | Health Informatics — Personal Health Device Communication Part 10471 Device Specialization — Independent Living Activity Hub | Others | 0 |
| MHD 17 | 60 | IS/ISO/IEEE 11073 : Part 10472 : 2012 | Health Informatics — Personal Health Device Communication Part 10472 Device Specialization — Medication Monitor | Others | 0 |
| MHD 17 | 61 | IS/ISO/IEEE 11073 : Part 30300 : 2004 | Health Informatics — Point-of-Care Medical Device Communication Part 30300 Transport Profile — Infrared Wireless | Others | 0 |
| MHD 17 | 62 | IS/ISO/IEEE 11073 : Part 30400 : 2012 | Health Informatics — Point-of-Care Medical Device Communication Part 30400 Interface Profile — Cabled Ethernet | Others | 0 |
| MHD 17 | 63 | IS/ISO/TR 11633 : Part 1 : 2009 | Health Informatics — Information Security Management for Remote Maintenance of Medical Devices and Medical Information Systems Part 1 Requirements and Risk Analysis | Others | 0 |
| MHD 17 | 64 | IS/ISO/TR 11633 : Part 2 : 2009 | Health Informatics — Information Security Management for Remote Maintenance of Medical Devices and Medical Information Systems Part 2 Implementation of an Information Security Management System ( ISMS ) | Others | 0 |
| MHD 17 | 65 | IS/ISO/TR 16056 : Part 1 : 2004 | Health Informatics – Interoperability of Telehealth Systems and Networks Part 1 Introduction and Definitions | Others | 2015, May |
| MHD 17 | 66 | IS/ISO/TR 16056 : Part 2 : 2004 | Health Informatics – Interoperability of Telehealth Systems and Networks Part 2 Real-Time Systems | Others | 2015, Apr |
| MHD 17 | 67 | IS/ISO/TR 17791 : 2013 | Health Informatics — Guidance on Standards for Enabling Safety in Health Software | Others | 0 |
| MHD 17 | 68 | IS/ISO/TR 20514 : 2005 | Health Informatics – Electronic Health Record – Definition, Scope and Context | Others | 2015, Oct |
| MHD 17 | 69 | IS/ISO/TR 27809 : 2007 | Health Informatics — Measures for Ensuring Patient Safety of Health Software | Others | 0 |
| MHD 17 | 70 | IS/ISO/TS 13972 : 2015 | Health Informatics — Detailed Clinical Models, Characteristics and Processes | Others | 0 |
| MHD 17 | 71 | IS/ISO/TS 14265 : 2011 | Health Informatics — Classification of Purposes for Processing Personal Health Information | Others | 0 |
| MHD 17 | 72 | IS/ISO/TS 14441 : 2013 | Health Informatics — Security and Privacy Requirements of EHR Systems for Use in Conformity Assessment | Others | 0 |
| MHD 17 | 73 | IS/ISO/TS 16791 : 2014 | Health Informatics — Requirements for International Machine-Readable Coding of Medicinal Product Package Identifiers | Others | 0 |
| MHD 17 | 74 | IS/ISO/TS 22077 : Part 2 : 2015 | Health Informatics ― Medical Waveform Format Part 2 Electrocardiography | Others | 0 |
| MHD 17 | 75 | IS/ISO/TS 22077 : Part 3 : 2015 | Health Informatics ― Medical Waveform Format Part 3 Long Term Electrocardiography | Others | 0 |
| MHD 17 | 76 | IS/ISO/TS 22220 : 2011 | Health Informatics — Identification of Subjects of Health Care | Others | 0 |
| MHD 17 | 77 | IS/ISO/TS 27527 : 2010 | Health Informatics — Provider Identification | Others | 0 |
| MHD 19 | 1 | IS 12572 : Part 1 : 1994 | Biological Evaluation of Medical Devices – Part 1 : Guidance on Selection of Tests | Code of Practice | 2016, Feb |
| MHD 19 | 2 | IS 12572 : Part 11 : 1990 | Guide for Evaluation of Medical Devices for Biological Hazards Part 11 Method of Tests for Eye Irritation | Methods of tests | 2016, Feb |
| MHD 19 | 3 | IS 12572 : Part 2 : 1995 | Biological Evaluation of Devices Medical – Part 2 : Animal Welfare Requirements | Others | 2016, Feb |
| MHD 19 | 4 | IS 12572 : Part 3 : 1988 | Guide for Evaluation of Medical Devices for Biological Hazards Part 3 Method of Testing by Tissue Implantation | Methods of tests | 2016, Feb |
| MHD 19 | 5 | IS 12572 : Part 4 : 2016 | Biological Evaluation of Medical Devices Part 4 Selection of Tests for Interaction with Blood ( First Revision ) | Methods of tests | 0 |
| MHD 19 | 6 | IS 12572 : Part 5 : 1988 | Guide for Evaluation of Medical Devices for Biological Hazards Part 5 Method of Test for Intracutaneous Reactivity of Extracts from Medical Devices | Methods of tests | 2016, Feb |
| MHD 19 | 7 | IS 12572 : Part 6 : 1988 | Guide for Evaluation of Medical Devices for Biological Hazards Part 6 Method of Test for Systemic Toxicity; Assessment of Pyrogenicity In Rabits of Extracts from Medical Devices | Methods of tests | 2016, Feb |
| MHD 19 | 8 | IS 12572 : Part 7 : 1988 | Guide for Evaluation of Medical Devices for Biological Hazards Part 7 Method of Test for Sensitization: Assessment of the Potential of Medical Devices to Produce Delayed Contact Dermatitis | Methods of tests | 2016, Feb |
| MHD 19 | 9 | IS 12572 : Part 8 : 1988 | Guide for Evaluation of Medical Devices for Biological Hazards Part 8 Method of Test for Skin Irritation of Extracts from Medical Devices: and | Methods of tests | 2016, Feb |
| MHD 19 | 10 | IS 12572 : Part 9 : 1988 | Guide for Evaluation of Medical Devices for Biological Hazards Part 9 Method of Test for Skin Irritation by Solid Medical Devices | Methods of tests | 2016, Feb |
| MHD 19 | 11 | IS/IEC 61010 : Part 1 : 2010 | Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 1 General Requirements | Product Specification | 0 |
| MHD 19 | 12 | IS/IEC 61010 : Part 2-081 : 2009 | Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use Part 2-081 Particular Requirements for Automatic and Semi-automatic Laboratory Equipment for Analysis and Other Purposes | Safety Standard | 0 |
| MHD 19 | 13 | IS/IEC/TS 10993 : Part 19 : 2006 | Biological Evaluation of Medical Devices Part 19 Physico-Chemical, Morphological and Topographical Characterization of Materials | 0 | |
| MHD 19 | 14 | IS/ISO 10993 : Part 1 : 2009 | Biological Evaluation of Medical Devices Part 1 Evaluation and Testing Within a Risk Management Process | 0 | |
| MHD 19 | 15 | IS/ISO 10993 : Part 10 : 2010 | Biological Evaluation of Medical Devices Part 10 Tests for Irritation and Skin Sensitization | Methods of tests | 0 |
| MHD 19 | 16 | IS/ISO 10993 : Part 11 : 2017 | Biological Evaluation of Medical Devices Part 11 Tests for Systemic Toxicity | 0 | |
| MHD 19 | 17 | IS/ISO 10993 : Part 15 : 2000 | Biological Evaluation of Medical Devices Part 15 Identification and Quantification of Degradation Products from Metals and Alloys | Methods of tests | 0 |
| MHD 19 | 18 | IS/ISO 10993 : Part 16 : 2017 | Biological Evaluation of Medical Devices Part 16 Toxicokinetic Study Design for Degradation Products and Leachables | 0 | |
| MHD 19 | 19 | IS/ISO 10993 : Part 17 : 2002 | Biological Evaluation of Medical Devices Part 17 Establishment of Allowable Limits for Leachable Substances | Methods of tests | 0 |
| MHD 19 | 20 | IS/ISO 10993 : Part 3 : 2014 | Biological Evaluation of Medical Devices Part 3 Tests for Genotoxicity, Carcinogenicity and Reproductive Toxicity ( First Revision ) | 0 | |
| MHD 19 | 21 | IS/ISO 10993 : Part 4 : 2017 | Biological Evaluation of Medical Devices Part 4 Selection of Tests for Interactions with Blood | 0 | |
| MHD 19 | 22 | IS/ISO 10993 : Part 5 : 2009 | Biological Evaluation of Medical Devices Part 5 Tests for in vitro Cytotoxicity | Methods of tests | 0 |
| MHD 19 | 23 | IS/ISO 10993 : Part 6 : 2016 | Biological Evaluation of Medical Devices Part 6 Tests for Local Effects after Implantation | 0 | |
| MHD 19 | 24 | IS/ISO 10993 : Part 7 : 2018 | Biological Evaluation of Medical Devices Part 7 Ethylene Oxide Sterilization Residuals | Methods of tests | 0 |
| MHD 19 | 25 | IS/ISO 10993 : Part 9 : 2009 | Biological Evaluation of Medical Devices Part 9 Framework for Identification and Quantification of Potential Degradation Products | Methods of tests | 0 |
| MHD 19 | 26 | IS/ISO 13022 : 2012 | Medical Products Containing Vlable Human Cells – Application of Risk Management and Requirements for Processing Pratices | Methods of tests | 0 |
| MHD 19 | 27 | IS/ISO 14155 : 2011 | Clinical Investigation of Medical Devices for Human Subjects — Good Clinical Practice | Others | 0 |
| MHD 19 | 28 | IS/ISO 22442 : Part 1 : 2015 | Medical Devices Utilizing Animal Tissues and their Derivatives Part 1 Application of Risk Management | Others | 0 |
| MHD 19 | 29 | IS/ISO 22442 : Part 2 : 2015 | Medical Devices Utilizing Animal Tissues and their Derivatives Part 2 Controls on Sourcing, Collection and Handling | Others | 0 |
| MHD 19 | 30 | IS/ISO 7405 : 2008 | Dentistry — Evaluation of Biocompatibility of Medical Devices Used in Dentistry | Methods of tests | 0 |
| MHD 19 | 31 | IS/ISO/TR 15499 : 2016 | Biological Evaluation of Medical Devices — Guidance on the Conduct of Biological Evaluation within a Risk Management Process | 0 | |
| MHD 19 | 32 | IS/ISO/TR 22442 : Part 4 : 2010 | Medical Devices Utilizing Animal Tissues and their Derivatives Part 4 Principles for Elimination and/or Inactivation of Transmissble Spongifrom Encephalopathy (TSE) Agents and Validation Assays for those Processes | Methods of tests | 0 |
| MHD 19 | 33 | IS/ISO/TR 37137 : 2014 | Cardiovascular Biological Evaluation of Medical Devices — Guidance For Absorbable Implants | Methods of tests | 0 |
Contact
USA:
MPR International GmbH
Chicago office: (773) 654-2673
Anaheim office: (714) 312-5966
usa@certification-india.com
EUROPE:
MPR International GmbH
Kaiserstr. 65, D-60329 Frankfurt, Germany
+49-69-2713769261
europe@certification-india.com
Video Channel 
Visit our YouTube channel to learn more about international product certifications here.
Glossary
More information on certifications in India.