BIS Standards
Here is a list of the current standards for BIS mandatory products.
For more information regarding the BIS certification, please read our free information booklet “BIS Certification – The Booklet“.
Certification Scheme I (ISI Mark Scheme)
| Product Category | IS No. | Product |
| Seats | IS:15546-2005 | Seats, Seats anchorages and head restraints |
| Cement | IS 12330 | Sulphate Resisting Portland Cement |
| IS 12600 | Low heat Portland Cement | |
| IS 1489 (Part 1) | Portland Pozzolana Cement-Part1 Fly-ash based | |
| IS 1489 (Part 2) | Portland Pozzolana Cement-Part 2 Calcined clay based | |
| IS 269 | Ordinary Portland Cement | |
| IS 3466 | Masonry Cement | |
| IS 455 | Portland Slag Cement | |
| IS 6452 | High Alumina Cement for Structural use | |
| IS 6909 | Super sulphated cement | |
| IS 8041 | Rapid hardening Portland cement | |
| IS 8042 | White Portland Cement | |
| IS 8043 | Hydrophobic Portland Cement | |
| IS 8229 | Oil well Cement | |
| Household Electrical goods | IS 12640 (Part 1) | Residual current operated circuit breakers for house hold and similar uses-Part 1 Circuit breakers without integral overcurrent protection (RCCBs) |
| IS 12640 (Part 2) | Residual current operated circuit breakers for household and similar uses–Part 2 Circuit breakers with integral overcurrent protection(RCVOs) | |
| IS 13010 | AC watt-hour meters, class 0.5, 1 & 2 | |
| IS 13779 | AC static watt-hour meters, class 1 & 2 | |
| IS 14697 | AC static transformer operated watt-hour and VAR-hour meters, class 0.2S & 0.5S | |
| IS 15111 (Part 1 & 2) | Self Ballasted Lamps for General Lighting Services – Part 1 : Safety Requirements & Part 2 : Performance Requirements | |
| IS 302 (Part 2/Sec 3) | Safety of household and similar electrical appliances – Electric iron | |
| IS 302 (Part 2/Sec 201) | Safety of household and similar electrical appliances– Electric immersion water-heaters | |
| IS 302 (Part 2/Sec 202) | Safety of household and similar electrical appliances –Electric stoves | |
| IS 302 (Part 2/Sec 30) | Safety of household and similar electrical appliances-Room heaters | |
| IS 3854 | Switches for domestic and similar purposes | |
| IS 418 | Tungsten filament general service electric lamps (upto100 W ) | |
| IS 694 | PVC insulated cables for working voltages up to and including 1100V | |
| IS 8828 * | Electrical Accessories-Circuit breakers for overcurrent protection for household and similar installations | |
| IS 9968 (Part 1) | Elastomer insulated cables (Part.1): For working voltages up to and including1100 V | |
| Batteries | IS 8144 | Multi-Purpose dry batteries |
| Food & Related Products | IS 15757 | Follow–up formula –complimentary foods |
| IS 11536 | Processed cereal based complementary foods | |
| IS 1165 | Milk-powder | |
| IS 1166 | Condensed milk, partly skimmed and skimmed condensed milk | |
| IS 12176 | Sweetened ultra high temperature treated condensed milk | |
| IS 13334 (Part 1) | Skimmed milk-powder, standard grade | |
| IS 13334 (Part 2) | Skimmed milk-powder, extra grade | |
| IS 13428 | Packaged Natural Mineral Water | |
| IS 14433 | Infant milk substitutes | |
| IS 14542 | Partly skimmed milk powder | |
| IS 14543 | Packaged Drinking Water (Other than Packaged Natural Mineral Water) | |
| IS 1656 | Milk-cereal based weaning foods | |
| IS 3470 | Hexane, Food grade | |
| IS 14625 | Plastic Feeding Bottles | |
| IS 5168 | Glass Feeding Bottles | |
| Oil Pressure Stoves | IS 10109 | Oil pressure stove, offset burner type |
| IS 2787 | Multi-burner oil pressure stoves | |
| IS 1342 | Oil pressure stoves | |
| Automobile Accessories | IS 13098 | Automotive vehicles –Tubes for pneumatic tyres |
| IS 15627 | Automotive vehicles– Pneumatic tyres for two and three-wheeled motor vehicles | |
| IS 15633 | Automotive vehicles-Pneumatic tyres for passenger car vehicles– Diagonal and radial ply | |
| IS 15636 | Automotive vehicles- Pneumatic tyres for commercial vehicles-Diagonal and radial ply | |
| Cylinder, Valves and Regulation | IS 14899 | Liquefied petroleum gas containers for automotive use |
| IS 15100 | Multifunction valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use | |
| IS 3196 (Part 4) | Welded low carbon steel cylinders exceeding 5 litre Water capacity for low pressure liquefiable gases Part 4 Cylinders for toxic and corrosive gases | |
| IS 3196 (Part 1) | Welded low carbon steel gas cylinder exceeding 5 litre water capacity for low pressure liquefiable gases Part1 Cylinders for liquefied petroleum gas (LPG) | |
| IS 3196 (Part 2) | Welded low carbon steel gas cylinder exceeding 5-litre water capacity for low pressure liquefiable gases Part 2 Cylinders for liquefiable gases other than LPG. | |
| IS 3224 | Valve fittings for compressed gas cylinder excluding liquefied petroleum gas cylinders | |
| IS 3745 | Yoke Type Valve Connection for Small Medical Gas Cylinders | |
| IS 7142 | Welded low carbon steel cylinders for low pressure liquefiable gases not exceeding 5 litre water capacity | |
| IS 7285 (Part 1) | Refillable Seamless steel gas cylinders Part1 Normalized steel cylinders | |
| IS 7285 (Part 2) | Refillable Seamless steel gas cylinders Part 2 Quenched and tempered steel cylinders with tensile strength less than 1100 MPa (112 kgf/mm2) | |
| IS 7302 | Valve fittings for gas cylinder valves for use with breathing apparatus | |
| IS 7312 | Welded and seamless steel dissolved acetylene gas cylinders | |
| IS 8737 | Valve fittings for use with liquefied petroleum gas cylinders of more than 5 litre water capacity Part 2 Valve fittings for newly manufactured LPG cylinders | |
| IS 8776 | Valve Fittings for Use with Liquefied Petroleum Gas (LPG) Cylinders up to and Including 5-Litre Water Capacity | |
| IS 9798 | Low pressure regulators for use with liquefied petroleum gas (LPG) mixtures | |
| Medical Equipment | IS 3055 (Part 1) | Clinical thermometers :Part1 Solid stem type |
| IS 3055 (Part 2) | Clinical thermometers :Part 2 Enclosed scale type | |
| IS 7620 (Part 1) | Diagnostic Medical X-Ray Equipment | |
| Steel Products | IS 1785 (Part-1) : 1983 | Specification for plain Harddrawn Steel Wire For Prestressed Concrete; Part 1 Cold – Drawn Stress relieved Wire. |
| IS 1785 (Part-2) : 1983 | Plain Hard-drawn Steel Wire for Pre-stressed Concrete; Part 2 as Drawn Wire | |
| IS 6003 : 2010 | Indented Wire for Prestressed Concrete -Specification | |
| IS 6006 : 2014 | Uncoated Stress Relieved Strand For Pre-stressed Concrete – Specification. | |
| IS 13620 : 1993 | Fusion Bonded Epoxy Coated Reinforcing Bars – Specification. | |
| IS 14268 : 1995 | Uncoated Stress Relieved Low Relaxation Seven- wire (ply) Strand for Pre-stressed Concrete – Specification. | |
| IS 277 : 2018 | Galvanized Steel Sheets (Plain and Corrugated) – Specification. | |
| IS 2002 : 2009 | Steel plates for pressure vessels for intermediate and high temperature service including boilers. | |
| IS 2041 : 2009 | Steel Plates for Pressure Vessels Used at Moderate and Low Temperature –Specification. | |
| IS 2830 : 2012 | Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes – Specification. | |
| IS 1786 : 2008 | High strength deformed steel bars and wires for concrete reinforcement- Specification except for High strength deformed steel bars and wires of sizes less than 8 mm.. | |
| IS 648 : 2006 | Cold rolled non-oriented electrical steel sheet and strip – Fully processed type- Specification. | |
| IS 3024 : 2015 | Grain Oriented Electrical Steel Sheet and Strip | |
| IS 15391 : 2003 | Cold Rolled Non-Oriented Electrical Steel Sheet and Strip – Semi-Processed Type- Specification. | |
| IS 1875 : 1992 | Carbon steel billets, blooms, slabs and bars for forgings. | |
| IS 3502 : 2009 | Steel Chequered Plates. | |
| IS 2062 : 2011 | Hot rolled medium high tensile structural steel except for bars and rods of diameter or thickness less than 6 mm and structural below 50 mm x 50 mm x 6 mm | |
| IS 432 : Part 1 : 1982 | Mild Steel andMedium Tensile Steel Bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild steel and medium tensile steel bars. | |
| IS 432 : Part 2 : 1982 | Mild steel and Medium Tensile steel bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire. | |
| IS 513 (Part 1) : 2016 | Cold reduced carbon steel sheets and strip Part 1 Cold Forming and Drawing Purpose (Sixth Revision). | |
| IS 513 (Part 2) : 2016 | Cold reduced low carbon steel sheets and strip Part 2 High Tensile and Multi-phase Steel (Sixth Revision). | |
| IS 1079 : 2017 | Hot Rolled Carbon Steel Sheet, Plate and Strip. | |
| IS 2879 : 1998 | Mild steel for metal arc welding electrodes. | |
| IS 5872 : 1990 | Cold Rolled Steel Strips (Box Strappings). | |
| IS 5986 : 2017 | Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging purposes. | |
| IS 6240 : 2008 | Hot Rolled Steel Plate (up to 6 mm) Sheet and Strip for the Manufacture of Low Pressure Liquefiable Gas Cylinders | |
| IS 7283 : 1992 | Hot Rolled bars for production of bright bars and machined parts for engineering applications. | |
| IS 7887 : 1992 | Mild steel wire rods for general engineering purposes. | |
| IS 10748: 2004 | Hot Rolled Steel Strip for Welded Tubes and Pipes. | |
| IS 11513 : 2017 | Hot Rolled Carbon Steel Strip For Cold Rolling Purposes. | |
| IS 15647 : 2006 | Hot rolled steel narrow width strip for welded tubes and pipes. | |
| IS 7904 : 2018 | High carbon steel wire rods- Specification | |
| IS 14246 : 2013 | Continuously pre-painted galvanized steel sheets and coils | |
| IS 15965 : 2012 | Pre–painted aluminium zinc alloy metallic coated steel strip and sheet (plain). | |
| IS 280:2006 | Mild steel wire for General Engineering purposes. | |
| IS 1835 : 1976 | Round Steel wire for ropes | |
| IS 3975: 1999 | Low Carbon Galvanized steel wires formed wires and Tapes for armouring of Cables | |
| IS 4368:1967 | Alloy Steel billets, blooms and slabs for forging for general engineering purposes. | |
| IS 4454 (Part 1) : 2001 | Steel wire for mechanical springs Part-1 cold drawn unalloyed steel wire. | |
| IS 4454 (Part 2): 2001 | Steel wire for mechanical springs Part-2 oil hardened and tempered steel wire. | |
| IS 4824:2006 | Bead Wires for Tyres | |
| IS 11169 (Part 1): 1984 | Steels for Cold Heading/Cold extrusion application Part-1 Wrought carbon and low alloy steels | |
| IS 11587:1986 | Structural Weather resistant steel. | |
| IS 15103: 2002 | Fire resistant Steel- Specification | |
| IS 15914:2011 | High Tensile Strength Flat Rolled Steel Plate (Up to 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder. | |
| IS 15961:2012 | Hot Dip aluminium- Zinc alloy metallic coated steel strip and sheet (Plain) | |
| IS 15962:2012 | Structural Steel for Building for Structures with improved seismic Resistance | |
| IS 6527:1995 | Stainless Steel wire Rod | |
| IS 6528:1995 | Stainless Steel Wires | |
| IS 6603:2001 | Stainless Steel Bars and Flats | |
| IS 5522:2014 | Stainless Steel sheets and strips for utensils- Specification | |
| IS 6911:2017 | Stainless Steel Plate, Sheet and Strip- Specification | |
| IS 15997:2012 | Low Nickel Austenitic Stainless Steel Sheet and Strip For Utensils and Kitchen Applications- Specification | |
| IS 1110 : 1990 | Ferrosilicon – Specification | |
| IS 4409 : 1973 | Specification for Ferronickel | |
| IS 1029 : 1970 | Specification for Hot rolled steel strip (bailing) | |
| IS 2385 : 1977 | Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plate | |
| IS 3039 : 1988 | Specification for Structural steel for construction of hulls of ships | |
| IS 9550 : 2001 | Bright steel bars – v Specification | |
| IS 3748 : 1990 | Tool and die steels – Specification | |
| IS 5517 : 1993 | Steel for hardening and tempering – Specification | |
| IS 7291 : 1981 | Specification for High speed tool steels | |
| IS 7494 : 1981 | Specification for Steel for valves for internal combustion engines | |
| IS 12146 : 1987 | Specification for Carbon manganese steel forgings for pressure vessels | |
| IS 16585 : 2016 | Magnetic materials – specification for individual material – Fe based amorphous strip delivered in the semi-processed state. | |
| IS 2831 : 2012 | Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (ordinary quality) – Specification. | |
| Stampings/laminations/cores of transformers (with or without winding) | ||
| IS 8329 : 2000 | Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage | |
| IS 9523:2000 | Ductile iron fittings for pressure pipes for water, gas and sewage | |
| IS 1161:2014 | Steel tubes for structural purposes | |
| IS 1239 (Part 1):2014 | Steel Tubes, Tubulars and Other Wrought Steel Fittings – Part 1 : Steel Tubes | |
| IS 4270:2001 | Steel tubes used for water-wells (upto 200 mm dia) | |
| Electrical Transformers | IS 1180 (Part 1) | Out door type Oil immersed Distribution Transformers upto and including 2500 kVA, 33 KV-specification Part 1 Mineral oil immersed |
| Electrical Motors | IS 12615 | Energy Efficient Induction Motors-Three Phase Squirrel Cage |
| Capacitors | IS 2993 | A.C. motor capacitors |
| IS 13340 | Power Capacitors of Self-healing Type for AC Power Systems having Rated Voltage up to 650V | |
| IS 13585 Part 1 | Shunt Power Capacitors of the Non-Self-Healing Type for AC System having a Rated Voltage up to and Including 1000V Part-1 General Performance, Testing amd Rating Safety Requirements Guide for Installation and Operation | |
| Chemicals & Fertilizers | IS 252:2013 | Caustic Soda -Specification |
| IS 10116 : 2015 | Boric Acid – Specification | |
| IS 15573 | Poly Aluminium Chloride | |
| IS 695 | Acetic Acid | |
| IS 2833 | Aniline | |
| IS 517 | Methanol | |
| Kitchen Appliances | IS 302 (Part 2/ Section 14) | Hand-held Blender |
| IS 4250 | Domestic Electric Food Mixer (Liquidizers and Grinders) and Centrifugal Juicer | |
| Domestic Water Heaters for use with LPG | IS 15558 | Instantaneous Domestic Water Heater for use with Liquefied Petroleum Gas |
| Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls | IS 1391 (Part-1): 2017 | Room Air Conditioners- Specification Part 1 Unitary Air Conditioners |
| IS 1391 (Part-2): 2018 | Room Air Conditioners- Specification Part 2 Split Air Conditioners | |
| IS 8148:2018 | Ducted and Package Air Conditioners | |
| IS 11329:2018 | Finned type Heat Exchanger for Room Air Conditioner | |
| IS 10617:2018 | Hermetic compressor , Hermetic Compressors-Specification | |
| IS/IEC 60730 (Part 2) Section 9: 2011 | Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements Section 9 Temperature Sensing Controls | |
| Plugs and Socket-Outlets and Alternating Current Direct Connected Static Prepayment Meters for Active Energy | IS 1293 : 2005 | Plugs and socket-outlets of Rated Voltage up to and including 250 Volts and Rated current up to and including 16 amperes |
| IS 15884:2010 | Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Class1 and 2) | |
| Domestic Gas Stoves for use with Liquefied Petroleum Gases | IS 4246: 2002 | Domestic Gas Stoves for use with Liquefied Petroleum Gases |
| Transparent Float Glass | IS 14900: 2018 | Transparent Float Glass |
| Domestic Pressure Cooker | IS 2347:2017 | Domestic Pressure Cooker |
| Cables | IS 1554(Part 1) : 1988 | Specification for PVC Insulated (Heavy Duty) Electric Cables Part 1 For Working Voltages up to and Including 1100 V |
| IS 1554(Part 2) : 1988 | Specification for PVC Insulated (Heavy Duty) Electric Cables Part 2 For Working Voltages from 3.3 kV up to and Including 11 kV | |
| IS 7098 (Part 1) : 1988 | Specification for Crosslinked Polyethylene Insulated PVC Sheathed Cables Part 1 for working voltages up to and including 1100 V | |
| IS 7098 (Part 2) : 2011 | Crosslinked polyethylene insulated Thermoplastics sheathed cables – Specification Part 2 for working voltages from 3.3 kV up to and including 33 kV | |
| IS 7098 (Part 3) : 1993 | Cross-Linked Polyethylene Insulated Thermoplastics Sheathed Cables Part 3 For Working Voltages from 66 kV Up to and Including 220 kV | |
| IS 14255 : 1995 | Aerial Bunched Cables – For Working Voltages Up to and Including 1100 Volts – Specification | |
| IS 9968 (Part 2) : 2002 | Specification for Elastomer Insulated Cables Part 2 For Working Voltages form 3.3 kV Up to and Including 33 kV | |
| IS 8784 : 1987 | Specification for Thermocouple Compensating Cables | |
| IS 9857 : 1990 | Welding Cables – Specification | |
| IS 14494 : 2019 | Elastomer Insulated Flexible Cables for Use in Mines – Specification | |
| IS 2593 : 1984 | Specification for Flexible Cables for Miner’s Cap-Lamps | |
| IS 5950 : 1984 | Specification for Shot Firing Cables (for use other than in shafts) | |
| IS 17048 : 2018 | Halogen Free Flame Retardant (HFFR) Cables for Working Voltages Up to and Including 1100 V – Specification |
Certification Scheme II (Registration Scheme)
| Product Category | Product Sub-Category | IS No. | Title |
| Electronics and IT Goods | Electronic Games (Video) | IS 616 | Audio, Video and Similar Electronic Apparatus – Safety Requirements |
| Laptop/Notebook/Tablets | IS 13252 (Part 1) | Information Technology Equipment – Safety – General Requirements | |
| Plasma/ LCD/LED Televisions of screen size 32″ & above | IS 616 | Audio, Video and Similar Electronic Apparatus – Safety Requirements | |
| Optical Disc Players with built in amplifiers of input power 200W and above | IS 616 | Audio, Video and Similar Electronic Apparatus – Safety Requirements | |
| Microwave Ovens | IS 302-2-25 | Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens | |
| Visual Display Units, Video Monitors of screen size 32″ & above | IS 13252 (Part 1) | Information Technology Equipment – Safety – General Requirements | |
| Printers, Plotters | IS 13252 (Part 1) | Information Technology Equipment – Safety – General Requirements | |
| Scanners | IS 13252 (Part 1) | Information Technology Equipment – Safety – General Requirements | |
| Wireless Keyboards | IS 13252 (Part 1) | Information Technology Equipment – Safety – General Requirements | |
| Telephone Answering Machines | IS 13252 (Part 1) | Information Technology Equipment – Safety – General Requirements | |
| Amplifiers with input power 2000W and above | IS 616 | Audio, Video and Similar Electronic Apparatus – Safety Requirements | |
| Electronic Musical Systems with input power 200W and above | IS 616 | Audio, Video and Similar Electronic Apparatus – Safety Requirements | |
| Electronic Clocks with Mains Powers | IS 302-2:26 | Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 26 Clocks | |
| Set Top Box | IS 13252 (Part 1) | Information Technology Equipment – Safety – General Requirements | |
| Automatic Data Processing Machine | IS 13252 (Part 1) | Information Technology Equipment – Safety – General Requirements | |
| Power Adaptors for IT Equipments | IS 13252 (Part 1) | Information Technology Equipment- Safety General Requirements | |
| Power Adaptors for Audio, Video & Similar Electronic Apparatus | IS 616 | Audio, Video and Similar Electronic Apparatus-Safety Requirements | |
| UPS/Invertors of rating≤5kVA | IS 16242 (Part 1) | General and Safety Requirements for UPS | |
| DC or AC Supplied Electronic Control gear for LED Modules | IS 15885 (Part 2/Sec 13) | Safety of Lamp Control gear Part 2 Particular Requirements Section 13 d.c. or a.c. Supplied Electronic Control gear for LED Modules | |
| Sealed Secondary Cells/Batteries containing Alkaline or other non-acid Electrolytes for use in portable applications | IS 16046 | Secondary Cells and Batteries containing Alkaline or other non-acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications | |
| Self-Ballasted LED Lamps for General Lighting Services | IS 16102(Part 1) | Self-Ballasted LED Lamps for General Lighting Services Part 1 Safety Requirements | |
| Fixed General Purpose LED Luminaries | 10322 (Part 5/Sec 1) | Luminaries Part 5 Particular Requirements Sec 1 Fixed General purpose luminaries | |
| Mobile Phones | IS 13252 (Part 1) | Information Technology Equipment-Safety-General Requirements | |
| Cash Registers | IS 13252 (Part 1) | Information Technology Equipment-Safety-General Requirements | |
| Point of Sale Terminals | IS 13252 (Part 1) | Information Technology Equipment-Safety-General Requirements | |
| Copying Machines/Duplicators | IS 13252 (Part 1) | Information Technology Equipment-Safety-General Requirements | |
| Smart Card Readers | IS 13252 (Part 1) | Information Technology Equipment-Safety-General Requirements | |
| Mail Processing Machines/Postage Machines/Franking Machines | IS 13252 (Part 1) | Information Technology Equipment-Safety-General Requirements | |
| Passport Reader | IS 13252 (Part 1) | Information Technology Equipment-Safety-General Requirements | |
| Power Banks for use in portable applications | IS 13252 (Part 1) | Information Technology Equipment-Safety-General Requirements | |
| Mobile Phones | IS 16333 (Part-3) | Mobile Phone Handsets Part 3 Indian Language Support for Mobile Phone Handsets – Specific Requirements | |
| Recessed LED Luminaries | IS 10322 (Part 5/Section 2): 2012 | Luminaires Part 5: Particular Requirements Section 2 Recessed Luminaires | |
| LED Luminaires for Road and Street lighting | IS 10322 (Part 5/Section 3): 2012 | Luminaires – Part 5: Particular Requirements Section 3 Luminaires for Road and Street Lighting | |
| LED Flood Lights | IS 10322 (Part 5/Section 5): 2013 | Luminaires – Part 5: Particular Requirements Section 5 Flood Lights | |
| LED Hand lamps | IS 10322 (Part 5/Section 6): 2013 | Luminaires – Part 5: Particular Requirements Section 6 Hamp Lamps | |
| LED Lighting Chains | IS 10322 (Part 5/Section 7): 2013 | Luminaires – Part 5: Particular Requirements Section 7 Lighting Chains | |
| LED Luminaires for Emergency Lighting | IS 10322 (Part 5/Section 8): 2013 | Luminaires – Part 5: Particular Requirements Section 8 Luminaires for Emergency Lighting | |
| UPS/Inverters of rating ≤ 10kVA | IS 16242 (Part 1):2014 | General and Safety Requirements for UPS | |
| Plasma/ LCD/LED Television of screen size up-to 32” | IS 616:2010 | Audio, Video and Similar Electronic Apparatus – Safety Requirements | |
| Visual Display Units, Video Monitors of screen size up-to 32” | IS 13252 (Part 1):2010 | Information Technology Equipment –Safety General Requirements | |
| CCTV Cameras/CCTV Recorders | IS 13252 (Part 1):2010 | Information Technology Equipment –Safety General Requirements | |
| Adapters for household and similar electrical appliances | IS 302 (Part 1): 2008 | Safety of Household and similar electrical appliances Part 1 General requirements | |
| USB driven Barcode readers, barcode scanners, Iris scanners, Optical fingerprint scanners | IS 13252 (Part 1):2010 | Information Technology Equipment –Safety General Requirements | |
| Smart watches | IS 13252 (Part 1):2010 | Information Technology Equipment –Safety General Requirements | |
| Solar Photovoltaics, Systems, Devices and Components | Crystalline Silicon Terrestrial Photovoltaic (PV) modules (Si wafer based) | IS 14286 IS/IEC 61730 -1 IS/IEC 61730 -2 |
Crystalline Silicon Terrestrial Photovoltaic (PV) modules – Design Qualification And Type Approval |
| Thin-Film Terrestrial Photovoltaic (PV) Modules (a-Si, CiGs and CdTe) | IS 16077 IS/IEC 61730 -1 IS/IEC 61730 -2 |
Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval | |
| Power converters for use in photovoltaic power system | IS 16221 (Part 2) | Safety of Power Converters for Use in Photovoltaic Power Systems Part 2-Particular Requirements for Inverters | |
| Utility –Interconnected Photovoltaic inverters | IS 16169 | Test Procedure of Islanding Prevention Measures for Utility-Interconnected Photovoltaic Inverters | |
| Storage battery | IS 16270 | Secondary Cells and Batteries for Solar Photovoltaic Application General-Requirements and Methods of Test |
This list of BIS relevant standards is being extended regularly.
Contact
USA:
MPR International GmbH
Chicago office: (773) 654-2673
Anaheim office: (714) 312-5966
usa@certification-india.com
EUROPE:
MPR International GmbH
Kaiserstr. 65, D-60329 Frankfurt, Germany
+49-69-2713769261
europe@certification-india.com
Video Channel 
Visit our YouTube channel to learn more about international product certifications here.
Glossary
More information on certifications in India.