Schließen
The Period of Validity of MTCTE Phases III and IV Has Been Extended By the TEC (Telecommunication Engineering Centre)
In partial amendment to Notification No. 5-2/2021-TEC/TEC/131 dated June 13, 2022 relating to testing and certification of telecom equipment under Phase III and Phase IV of the MTCTE Scheme, as provided in the Indian Telegraph (Amendment) Rules 2017, several amendments have been made. Telecom equipment generally requires TEC certification to be approved for import and distribution in India.
The changes come into effect with immediate effect and include as below:
- 32 product categories covered by Annex I have been extended for mandatory testing and certification until October 1, 2023 (3 months). These include products such as devices operating in the 2.4 and 5 GHz range, IoT gateways, LAN switches, routers, conferencing equipment, IP security equipment, location devices, transmission terminals-2 etc..
- For 12 product categories covered by Annex II, the testing and certification obligation has been extended until January 1, 2024 (6 months). These include products such as satellite communication equipment, fiber optic cables, base stations for mobile networks, compact mobile networks, etc..
- For 10 product categories covered by Annex III, the acceptance of test reports from ILAC accredited laboratories (countries without cross-border cooperation) for technical parameters has been extended until 1 January 1, 2024 (6 months). This includes products such as satellite communication equipment, fiber optic cables, base stations for mobile networks, compact mobile networks, etc..
If you are interested in understanding what requirements are needed for your product to be imported into India, please do not hesitate to contact us by email or phone (Europe: +49-69-271 37 69 261, US: +1 773 654-2673). There is no cost or obligation for us to check for you. If a certification need is discovered we can provide a quotation to make sure that all your certification needs are covered.
For more information about TEC certification, please refer to our free brochure “TEC Certification Made Easy“.
Improved Quality Control for Bolts, Nuts and Fasteners
New Delhi, 21 July 2023: To maintain quality standards and ensure consumer safety, the Ministry of Commerce and Industry has listed bolts, nuts and fasteners (quality control) in an Ordinance 2023. This quality control order, empowered by the Bureau of Indian Standards Act, 2016, prescribes stringent quality requirements for these important industrial components.
These products are required to carry the standard mark under a BIS license as per Scheme-I of the Bureau of Indian Standards (Conformity Assessment) Regulations (2018) and hence require BIS certification (BIS ISI).
The regulation will come into force six months after notification, but with different deadlines for micro and small enterprises under the Micro, Small and Medium Enterprises Development Act of 2006: nine months for small enterprises and twelve months for micro enterprises.
Exemptions: The regulation does not apply to goods that are manufactured domestically for export, imported as part of finished goods or imported for export-oriented production. Micro and small enterprises that meet certain investment and turnover criteria are also exempt.
Any person who contravenes the provisions of this Ordinance shall be liable to prosecution under the provisions of the Bureau of Indian Standards Act, 2016.
| Goods or articles | Indian Standard | Titel of indian Standard |
| Bolts, Nuts and Fasteners | 1363 (Part 1):2019 | Hexagon Head Bolts, Screws and Nuts of product Grade C Hexagon Head Bolts (Size Range M 5 to M 64) |
| 1363 (Part 2): 2018 | Hexagon Head Screw (Size ranges from M 5 to M 64) | |
| 1363 (Part 3): 2018 | Hexagon Head Bolts, Screws and Nuts of product Grade C – Hexagon Nuts (Size Range M5 to M64) | |
| 1364 (Part 1):2018 | Hexagon Head Bolts, Screws and Nuts of product Grades A and B – Hexagon Head Bolts (Size Range M 1.6 To M 64) | |
| 1364 (Part 2) :2018 | Hexagon Head Bolts, Screws and Nuts of Product Grades A and B – Hexagon Head Screws (Size Range M 1.6 to M 64) | |
| 4621:1975 | Indicating Bolts for use in public baths and lavatories | |
| 5187:1972 | Flush Bolts | |
| 10238:2001 | Fasteners – Threaded Steel Fastener – Step Bolts for Steel Structures | |
| 12427:2001 | Fasteners – Threaded Steel Fasteners – Hexagon Head Transmission Tower Bolts | |
| 3757:1985 | High Strength Structural Bolts | |
| 204 (Part 2): 1992 | Tower Bolts- Non-ferrous metals | |
| 204 (Part 1):1991 | Tower Bolts- Ferrous metals | |
| Stainless Steel Sliding Door Bolts (Aldrops) for use With Padlocks | ||
| 2681:1993 | Non-ferrous metal sliding door bolts (aldrops) for use with padlocks | |
| 281:2009 | Mild steel sliding door bolts for use with padlocks | |
| 7534:1985 | Sliding locking bolts for use with padlocks | |
| 1284:1975 | Wrought Aluminium Alloy Bolt and Screw Stock for General Engineering purposes | |
| 15833:2009 | Stainless steel Tower Bolts | |
| 6623:2004 | High Strength Structural Nuts |
If you are interested in understanding what requirements are needed for your product to be imported into India, please do not hesitate to contact us by email or phone (Europe: +49-69-271 37 69 261, US: +1 773 654-2673). There is no cost or obligation for us to check for you. If a certification need is discovered we can provide a quotation to make sure that all your certification needs are covered.
If you have any questions you can also use our chat-window in the bottom right. (Please check your browser settings if you can’t see the window)
For more information about BIS certification, please refer to our free brochure “BIS Certification Made Easy“.
Clarification regarding IS 17043 : 2018 for Derby Shoes
Derby shoes will be required to have BIS certification starting July 1, 2023, according to the Leather and Other Materials (Quality Control) Order, 2022, based on the Standard IS 17043:2018.
Due to the ambiguity surrounding the term “Derby shoes,” there have been inquiries from stakeholders seeking clarification on whether the standard and quality control order (CQO) apply to all civilian shoes designed in the derby style, or those intended for use by the armed forces/police personnel, or both.
The clarification provided states that at present, the scope of IS 17043:2018 and the Leather and Other Materials (Quality Control) Order, 2022, only applies to Derby Shoes designated for use by the armed forces/police forces. Consequently, these specific derby shoes will be governed by the mentioned QCO, while civilian-use derby shoes are currently not subject to its application.
If you are interested in understanding what requirements are needed for your product to be imported into India, please do not hesitate to contact us by email or phone (Europe: +49-69-271 37 69 261, US: +1 773 654-2673). There is no cost or obligation for us to check for you. If a certification need is discovered we can provide a quotation to make sure that all your certification needs are covered.
If you have any questions you can also use our chat-window in the bottom right. (Please check your browser settings if you can’t see the window)
For more information about BIS certification, please refer to our free brochure “BIS Certification Made Easy“.
India Imposes New Import Restrictions on Digital Devices
The Government of India has recently imposed stringent restrictions on the import of Laptops, Tablets, all-in-one PCs, and certain other computer categories falling under HSN 8471. Laptops and similar products need a BIS certification in India. Even with the BIS-CRS certificates required for such products, an additional import License from the Directorate General of Foreign Trade (DGFT) is now mandatory. As per the notification released by the DGFT, products under specific HS codes, including 84713010, 84713090, and others, will now face import restrictions.
Furthermore, manufacturers aiming to import these devices must first obtain Equipment Type Approval and an Import License from the Wireless Planning & Coordination (WPC) wing. Notably, the Equipment type approval through self-declaration (ETA-SD) will no longer be considered valid for this process. However, there are exemptions to these new rules. Single units of laptops, tablets, and all-in-one PCs can be imported without these licensing conditions, though this does not apply to servers. Additionally, products imported for specific purposes such as R&D, testing, benchmarking, and evaluation, or those re-imported after overseas repairs, as well as products that are integral components of other capital goods, are also exempted from these conditions.
If you are interested in understanding what requirements are needed for your product to be imported into India, please do not hesitate to contact us by email or phone (Europe: +49-69-271 37 69 261, US: +1 773 654-2673). There is no cost or obligation for us to check for you. If a certification need is discovered we can provide a quotation to make sure that all your certification needs are covered.
If you have any questions you can also use our chat-window in the bottom right. (Please check your browser settings if you can’t see the window)
For more information about BIS certification, please refer to our free brochure “BIS Certification Made Easy“.
You can also find more information about WPC certification in our free brochure “WPC Certification Made Easy“.
We are part of the CERTANIA-Group.